Results 1 to 10 of 26

Thread: [Tutorial] - Hacking a Router Log In Page -


  1. MagicalMonkey's Avatar

    MagicalMonkey Little One

    Join Date Oct 2011

    Posts 262

    Membership Standard

    Reputation: 1864

    01-12-2012 07:29 PM #1 [Tutorial] - Hacking a Router Log In Page -


    Hacking into a Password Protected Router Page

    Magical Monkey

    For what ever reason the day may come where you need access to someone's router page (Better known as the router set up page for Belkin users.), but it can be hard to do that when this router page has a password on it. So in this tutorial I will be showing you how to get that password and then crack the code in to a form that can be used so that you can log in.



    Important:
    • This was tested on a Belkin Router and has not been tested on different Routers.
      If you would like to confirm that it works on your router let me know.
    • You must absolutely as far as I know must be connected to the router in order for it to work.
    • I did find this by myself. I do not doubt that this has been found, but just remember who found it for you. Thank you.
      After some research this method turned out to be newer than I thought, so congrats to me for bringing original hacking methods to NGU. lol
    • If you do this on a router page other than yours you could get in serious trouble.
    • Some may argue this would not work because I have previously connected and successfully logged into my router page, but do not worry because I basically reset my web browser.





    How To
    (Belkin Guide)

    Specifications of Tested Router:
    Firmware Version - 5.00.12
    Boot Version - 1.18
    Hardware - F5D7234-4 v5 (01)



    Step 1
    Open your router page by putting your IP address in the address bar of your browser. (In this case I am using Google Chrome.) You should see your router page open. Click on log in for Belkin users.

    Step 2
    Then right click any where on the web page and select "Inspect Element". Then click on the tab named "Resources". After that find the file named "login.stm". Open it and go to line 82. (Exact line may vary depending on browser and actual router; see the photo below for more detailed information) On that line you will see a md5 hash code.

    Step 3
    Now take the code you found in step two and go to a website that will translate the code for you. In the example below the website used was [Only registered and activated users can see links. ]

    Now that you have the password you can log in. If rednoize was not able to convert it for you try another website. Good luck.




    How to Find Your IP Address

    Thank you tokzikate for putting this small guide on finding your IP address together.

    1) Open cmd
    2) Type ipconfig
    3) Look for your default gateway


    Example of output:

    Windows IP Configuration

    Wireless LAN adapter Wireless Network Connection:

    Connection-specific DNS Suffix . :*
    Link-local IPv6 Address . . . . . : fe80::3064:a541:92c:ef13%12
    IPv4 Address. . . . . . . . . . . : 192.168.0.122
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : fe80::222:b0ff:fed3:f452%12
    192.168.0.1

    Ethernet adapter Local Area Connection:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :*

    Tunnel adapter isatap.{E5FB5FB8-435F-4F50-90E1-CA3CFB0EBBDF}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :*

    Tunnel adapter Teredo Tunneling Pseudo-Interface:

    Connection-specific DNS Suffix . :*
    IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:3809:d8e0:355b:39cd
    Link-local IPv6 Address . . . . . : fe80::3809:d8e0:355b:39cd%13
    Default Gateway . . . . . . . . . : ::

    Tunnel adapter isatap.{ED49328E-2BDB-4F52-9500-8FC467B3673F}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :*




    Screenshot Examples

    Here are some screen shots I took after first doing this.








    Video



    Coming Soon...







    Default Router Passwords and Usernames


    You can find a nice list of default passwords and user names for common routers [Only registered and activated users can see links. ]



    There was supposed to be a nice FAQ section here, but I have not received enough questions yet. Please help fix this.


    I hope you guys have enjoyed this guide and look forward to my next tutorial that I will make soon enough.
    Last edited by MagicalMonkey; 01-13-2012 at 12:20 AM.

  2. The Following User Says Thank You to MagicalMonkey For This Useful Post:


  3. The Clipse's Avatar

    The Clipse Dame Los Nuggets Plz

    Join Date Jun 2010

    Posts 1,723

    Membership Donator

    Reputation: 3173

    01-12-2012 08:09 PM #2

    Quote Originally Posted by MagicalMonkey View Post
    Hacking into a Router Page With a Password


    For what ever reason the day may come where you need access to someone's router page (Better known as the router set up page for Belkin users.), but it can be hard to do that when this router page has a password on it. So in this tutorial I will be showing you how to get that password and then crack the code in to a form that can be used so that you can log in.



    Important:
    • This was tested on a Belkin Router and has not been tested on different Routers.
      If you would like to confirm that it works on your router let me know.
    • You must absolutely as far as I know must be connected to the router in order for it to work.
    • I did find this by myself. I do not doubt that this has been found, but just remember who found it for you. Thank you.
    • If you do this on a router page other than yours you could get in serious trouble.
    • Some may argue this would not work because I have previously connected and successfully logged into my router page, but do not worry because I basically reset my web browser.





    How To
    (Belkin Guide)

    Specifications of Tested Router:
    Firmware Version - 5.00.12
    Boot Version - 1.18
    Hardware - F5D7234-4 v5 (01)



    Step 1
    Open your router page by putting your IP address in the address bar of your browser. (In this case I am using Google Chrome.) You should see your router page open. Click on log in for Belkin users.

    Step 2
    Then right click any where on the web page and select "Inspect Element". Then click on the tab named "Resources". After that find the file named "login.stm". Open it and go to line 82. (Exact line may very; see the photo below for more detailed information) On that line you will see a md5 hash code.

    Step 3
    Now take the code you found in step two and go to a website that will translate the code for you. In the example below the website used was [Only registered and activated users can see links. ]

    Now that you have the password you can log in. If rednoize was not able to convert it for you try another website. Good luck.


    Screenshot Examples

    Here are some screen shots I took after first doing this.








    Video



    Coming Soon...




    I will have more stuff up soon so feel free to comment but know this page is under construction. Also I will have a list of default passwords and user names for all routers that can be used.
    This would only be nice if you did not need to be connected to it so you can actually use this in a hacking situation. In this case you already have access to the network. And who actually accesses their router page? I'm sure the user was admin/administrator and the pass was password.
    I hear it's amazing when the famous purple stuffed jelly worm in flap-jaw space with the tuning fork does a raw blink on Hara-kiri Rock. I need scissors! 61!
    *[Only registered and activated users can see links. ]*

  4. Join Date Nov 2011

    Posts 712

    Membership Donator

    Reputation: 7592

    01-12-2012 08:12 PM #3

    Quote Originally Posted by MagicalMonkey View Post
    Hacking into a Router Page With a Password


    For what ever reason the day may come where you need access to someone's router page (Better known as the router set up page for Belkin users.), but it can be hard to do that when this router page has a password on it. So in this tutorial I will be showing you how to get that password and then crack the code in to a form that can be used so that you can log in.



    Important:
    • This was tested on a Belkin Router and has not been tested on different Routers.
      If you would like to confirm that it works on your router let me know.
    • You must absolutely as far as I know must be connected to the router in order for it to work.
    • I did find this by myself. I do not doubt that this has been found, but just remember who found it for you. Thank you.
    • If you do this on a router page other than yours you could get in serious trouble.
    • Some may argue this would not work because I have previously connected and successfully logged into my router page, but do not worry because I basically reset my web browser.





    How To
    (Belkin Guide)

    Specifications of Tested Router:
    Firmware Version - 5.00.12
    Boot Version - 1.18
    Hardware - F5D7234-4 v5 (01)



    Step 1
    Open your router page by putting your IP address in the address bar of your browser. (In this case I am using Google Chrome.) You should see your router page open. Click on log in for Belkin users.

    Step 2
    Then right click any where on the web page and select "Inspect Element". Then click on the tab named "Resources". After that find the file named "login.stm". Open it and go to line 82. (Exact line may very; see the photo below for more detailed information) On that line you will see a md5 hash code.

    Step 3
    Now take the code you found in step two and go to a website that will translate the code for you. In the example below the website used was [Only registered and activated users can see links. ]

    Now that you have the password you can log in. If rednoize was not able to convert it for you try another website. Good luck.


    Screenshot Examples

    Here are some screen shots I took after first doing this.








    Video



    Coming Soon...




    I will have more stuff up soon so feel free to comment but know this page is under construction. Also I will have a list of default passwords and user names for all routers that can be used.
    Nice thread, looks informative and well done.
    Just a heads up though - I wouldn't spam the link of a thread like this in the SB. The likelihood is you'll get more negative attention than appreciation.

  5. MagicalMonkey's Avatar

    MagicalMonkey Little One

    Join Date Oct 2011

    Posts 262

    Membership Standard

    Reputation: 1864

    01-12-2012 08:14 PM #4

    Quote Originally Posted by clipse_101 View Post
    This would only be nice if you did not need to be connected to it so you can actually use this in a hacking situation. In this case you already have access to the network. And who actually accesses their router page? I'm sure the user was admin/administrator and the pass was password.
    I will continue to look into this. This is helpful though if you wanna mess with a hotel guests or any place that offers free wifi. Also guessing the password is fine and all, but some people/ businesses are smart enough to change the default passwords.

    Also thanks for you feed back. Every comment is one more step towards improving this post.

  6. tokzikate's Avatar

    tokzikate Gym leader

    Join Date Jul 2011

    Posts 340

    Membership Standard

    Reputation: 720

    01-12-2012 08:15 PM #5

    thanks for the tut, but to find your router login page on windows add this:
    1) open cmd
    2) type ipconfig
    3) Look for your default gateway
    example of output:
    Windows IP Configuration


    Wireless LAN adapter Wireless Network Connection:

    Connection-specific DNS Suffix . :
    Link-local IPv6 Address . . . . . : fe80::3064:a541:92c:ef13*
    IPv4 Address. . . . . . . . . . . : 192.168.0.122
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : fe80::222:b0ff:fed3:f452*
    192.168.0.1

    Ethernet adapter Local Area Connection:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :

    Tunnel adapter isatap.{E5FB5FB8-435F-4F50-90E1-CA3CFB0EBBDF}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :

    Tunnel adapter Teredo Tunneling Pseudo-Interface:

    Connection-specific DNS Suffix . :
    IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:3809:d8e0:355b:39cd
    Link-local IPv6 Address . . . . . : fe80::3809:d8e0:355b:39cd*
    Default Gateway . . . . . . . . . : ::

    Tunnel adapter isatap.{ED49328E-2BDB-4F52-9500-8FC467B3673F}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    edit: changed MAC addresses and the like
    ~tokzikate
    IM BACK BITCHES!

  7. MagicalMonkey's Avatar

    MagicalMonkey Little One

    Join Date Oct 2011

    Posts 262

    Membership Standard

    Reputation: 1864

    01-12-2012 08:16 PM #6

    Quote Originally Posted by Objectivate View Post
    Nice thread, looks informative and well done.
    Just a heads up though - I wouldn't spam the link of a thread like this in the SB. The likelihood is you'll get more negative attention than appreciation.
    lol, thanks for the tip. Next time if I need a quick advertisement I will post the link once instead of twice. :P Or not at all. lol

  8. The Clipse's Avatar

    The Clipse Dame Los Nuggets Plz

    Join Date Jun 2010

    Posts 1,723

    Membership Donator

    Reputation: 3173

    01-12-2012 08:16 PM #7

    Quote Originally Posted by MagicalMonkey View Post
    I will continue to look into this. This is helpful though if you wanna mess with a hotel guests or any place that offers free wifi. Also guessing the password is fine and all, but some people/ businesses are smart enough to change the default passwords.

    Also thanks for you feed back. Every comment is one more step towards improving this post.
    But those are the only practical places you can actually succeed in getting into their connections. Otherwise you would need to crack into their connection then try to gain access to their router and have some fun such as lock them out
    I hear it's amazing when the famous purple stuffed jelly worm in flap-jaw space with the tuning fork does a raw blink on Hara-kiri Rock. I need scissors! 61!
    *[Only registered and activated users can see links. ]*

  9. MagicalMonkey's Avatar

    MagicalMonkey Little One

    Join Date Oct 2011

    Posts 262

    Membership Standard

    Reputation: 1864

    01-12-2012 08:28 PM #8

    Quote Originally Posted by tokzikate View Post
    thanks for the tut, but to find your router login page on windows add this:
    1) open cmd
    2) type ipconfig
    3) Look for your default gateway
    example of output:
    I will add this and you will be noted in the credits that I will need to make now. lol Thanks. I guess I just assumed people knew this, but its better that I have it.

    ---------- Post added at 08:28 PM ---------- Previous post was at 08:18 PM ----------

    Quote Originally Posted by clipse_101 View Post
    But those are the only practical places you can actually succeed in getting into their connections. Otherwise you would need to crack into their connection then try to gain access to their router and have some fun such as lock them out
    Unfortunately this method has it's limitations, but I believe that with more research this may turn into something bigger than we thought. Especially now that it has been brought to the public attention.

  10. The Clipse's Avatar

    The Clipse Dame Los Nuggets Plz

    Join Date Jun 2010

    Posts 1,723

    Membership Donator

    Reputation: 3173

    01-12-2012 08:35 PM #9

    Quote Originally Posted by MagicalMonkey View Post
    I will add this and you will be noted in the credits that I will need to make now. lol Thanks. I guess I just assumed people knew this, but its better that I have it.

    ---------- Post added at 08:28 PM ---------- Previous post was at 08:18 PM ----------



    Unfortunately this method has it's limitations, but I believe that with more research this may turn into something bigger than we thought. Especially now that it has been brought to the public attention.
    It can, its called hacking haha
    I hear it's amazing when the famous purple stuffed jelly worm in flap-jaw space with the tuning fork does a raw blink on Hara-kiri Rock. I need scissors! 61!
    *[Only registered and activated users can see links. ]*

  11. MagicalMonkey's Avatar

    MagicalMonkey Little One

    Join Date Oct 2011

    Posts 262

    Membership Standard

    Reputation: 1864

    01-12-2012 08:42 PM #10

    Quote Originally Posted by clipse_101 View Post
    It can, its called hacking haha
    Indeed it is. Though I try to avoid this word, because there is always that one guy who tries to say: "Oh. That's not real hacking... Blah.... Blah.... Once I (Place load of crap hacking story here)... Blah..." lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •