Your going to need (2) Ethernet slots/ports "NON-WIRELESS" - "$20.00 bucks at BestBuy for an External/secondary slot. | This is to Bridge your Two connections - to Receive and Send Packets.
**Not Always, but you'll need a "Cross-Over-Cable". This is to Receive and Send Packets. - For info about this, please vistit these links:
Info on a Cross-Over-Cable: You must login or register to view this content.
Go to: You must login or register to view this content. then click "Download" on the top navigation. Once you proceed on Download section you want to click "Commview 6.1" or for Wireless, click "Commview for WiFi 6.2" Next, Install Setup, and Continue to install and leave the selections of installing itself alone. (Click Yes/Continue threw out install setup)
((PT.2))
Now, once you have your TWO Ethernet slots/ports, you need to Bridge your Two Connections will your "Cross-Over-Cable" Connected to your 2nd Network card/Ethernet slot.
Now, While Commview is opened, Click on the START Button. This will start scanning ALL ip's that are connected to you. "from your Cross-Over & Bridged Connections".
Now, you can DoS/Disconnect an IP from Commview by Sending Packets, but it CAN be Difficult so, TAKE YOUR OWN TIME - to search for and DoSer of and IP LAGGER, """""Alot of people use Net-tools which is a GREAT program with Various Network Tools. Link: You must login or register to view this content.
This [How To] is not 100% explanatory.
(((ALL))) Credit goes to OcZiDe, Besides Additional Programs provided. 100% Hand Typed, hope this helps. ANY Q's ask me!!!
PLEASE "REP" IF THIS HELPED OR JUST REP ANYWAYS FOR MY TIRED ARMS HA!
Amazing tutorial, you alot of effort into this and I'm suprised not as many people have replied.
ya i know. Nobody would have seen this if i never bumped it for him and i only bumped it because i thoght it was a good tut. He should be reped by everyone for this if they think he deserves it