Post: Jailbreak mega thread 4.2.1 to 4.3.2
Options
04-22-2011, 04:22 PM
#1
.DiGiTaLTwO.
ii Love My Life <3
iPhone 4,3Gs, 4.2.1 UNTETHERE
Step One
Open your web browser of choice and navigate to You must login or register to view this content.. Click the Windows link at the bottom of the screen.
Step Two
When prompted save the download to your desktop
Step Three
Double click the downloaded gp_win_rc5_b2.zip file then drag the greenpois0n.exe file to the desktop. Double greenpois0n.exe from the desktop to launch the application
Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button
Step Five
You will now be instructed on how to place your iPhone into DFU mode.
You will be asked to press and hold the sleep button for 2 seconds.
Continue holding sleep; press and hold home for 10 seconds
Release sleep button; continue holding home for 15 seconds.
Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.
Step Seven
Greenpois0n will now jailbreak your device
Step Eight
Click the Quit button once the software application has completed.
You'll notice some verbose mode text scrolling on your device.
Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.
Step Ten
Press to select Cydia then press the large Install Cydia button that appears.
Step Eleven
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Twelve
Restart your iPhone then run Cydia.
iPhone 4,3Gs 4.3.2 UNTETHERE
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.2 firmware from below and place it in the same folder.
4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.2 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.2 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
iPhone 4,3Gs 4.3.1:
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.1 firmware from below and place it in the same folder.
4.3.1: iPhone3,1_4.3.1_8G4_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.1 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.1 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
iPhone 4,3Gs 4.3.0:
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.0 firmware from below and place it in the same folder.
4.3.0: iPhone3,1_4.3_8F190_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.0 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.0 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
These works with iTouches too!! And if you need another tutorial from other device like iPhone 2G or 3G, let me know!
I will be posting later how to JB iPad 1!!
Links:
Redsn0w: You must login or register to view this content.
Greenpois0n: greenpois0n.com
The following 6 users say thank you to .DiGiTaLTwO. for this useful post:
04-22-2011, 04:29 PM
#2
Toon_Squad
Banned
Originally posted by JoseTua
Hi guys, this is what everyone wanted, Jailbreak Mega Thread, for iPhone 3Gs,iPhone 4 and iPod Touches. This will teach you every JB from 4.2.1 to 4.3.2
iPhone 4,3Gs, 4.2.1 UNTETHERE
Greenpois0n
Step One
Open your web browser of choice and navigate to You must login or register to view this content.. Click the Windows link at the bottom of the screen.
Step Two
When prompted save the download to your desktop
Step Three
Double click the downloaded gp_win_rc5_b2.zip file then drag the greenpois0n.exe file to the desktop. Double greenpois0n.exe from the desktop to launch the application
Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button
Step Five
You will now be instructed on how to place your iPhone into DFU mode.
You will be asked to press and hold the sleep button for 2 seconds.
Continue holding sleep; press and hold home for 10 seconds
Release sleep button; continue holding home for 15 seconds.
Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.
Step Seven
Greenpois0n will now jailbreak your device
Step Eight
Click the Quit button once the software application has completed.
You'll notice some verbose mode text scrolling on your device.
Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.
Step Ten
Press to select Cydia then press the large Install Cydia button that appears.
Step Eleven
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Twelve
Restart your iPhone then run Cydia.
iPhone 4,3Gs 4.3.2 UNTETHERE
Redsn0w
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.2 firmware from below and place it in the same folder.
4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.2 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.2 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
iPhone 4,3Gs 4.3.1:
Redsn0w
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.1 firmware from below and place it in the same folder.
4.3.1: iPhone3,1_4.3.1_8G4_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.1 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.1 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
iPhone 4,3Gs 4.3.0:
Redsn0w
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.0 firmware from below and place it in the same folder.
4.3.0: iPhone3,1_4.3_8F190_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.0 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.0 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
These works with iTouches too!! And if you need another tutorial from other device like iPhone 2G or 3G, let me know!
I will be posting later how to JB iPad 1!!
Links:
Redsn0w: You must login or register to view this content.
Greenpois0n: greenpois0n.com
iPhone 4,3Gs, 4.2.1 UNTETHERE
Step One
Open your web browser of choice and navigate to You must login or register to view this content.. Click the Windows link at the bottom of the screen.
Step Two
When prompted save the download to your desktop
Step Three
Double click the downloaded gp_win_rc5_b2.zip file then drag the greenpois0n.exe file to the desktop. Double greenpois0n.exe from the desktop to launch the application
Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button
Step Five
You will now be instructed on how to place your iPhone into DFU mode.
You will be asked to press and hold the sleep button for 2 seconds.
Continue holding sleep; press and hold home for 10 seconds
Release sleep button; continue holding home for 15 seconds.
Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.
Step Seven
Greenpois0n will now jailbreak your device
Step Eight
Click the Quit button once the software application has completed.
You'll notice some verbose mode text scrolling on your device.
Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.
Step Ten
Press to select Cydia then press the large Install Cydia button that appears.
Step Eleven
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Twelve
Restart your iPhone then run Cydia.
iPhone 4,3Gs 4.3.2 UNTETHERE
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.2 firmware from below and place it in the same folder.
4.3.2 (4 GSM): iPhone3,1_4.3.2_8H7_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.2 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.2 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
iPhone 4,3Gs 4.3.1:
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.1 firmware from below and place it in the same folder.
4.3.1: iPhone3,1_4.3.1_8G4_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.1 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.1 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
iPhone 4,3Gs 4.3.0:
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w and place it in the Pwnage folder. Likewise, download the latest 4.3.0 firmware from below and place it in the same folder.
4.3.0: iPhone3,1_4.3_8F190_Restore.ipsw
Extract the RedSn0w zip file into the same folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down Shift and click the Restore button. Restore is preferred as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the 4.3.0 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.0 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPhone into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPhone will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPhone finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard
These works with iTouches too!! And if you need another tutorial from other device like iPhone 2G or 3G, let me know!
I will be posting later how to JB iPad 1!!
Links:
Redsn0w: You must login or register to view this content.
Greenpois0n: greenpois0n.com
lol thnx now imma put theses jb in my flash drive and make money like i always do LMFAO :
420:
The following user thanked Toon_Squad for this useful post:
04-22-2011, 04:48 PM
#4
.DiGiTaLTwO.
ii Love My Life <3
Originally posted by The
Awesome, Thanks for this!
Of course bro :y:
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
Originally posted by Darlin65
lol thnx now imma put theses jb in my flash drive and make money like i always do LMFAO :420:
420:
Haha! You make me lol! :y:
The following 2 users say thank you to .DiGiTaLTwO. for this useful post:
04-23-2011, 07:35 AM
#6
anddrew
League Champion
Originally posted by JoseTua
iPhone 4,3Gs, 4.2.1 UNTETHERE
Step One
Open your web browser of choice and navigate to You must login or register to view this content.. Click the Windows link at the bottom of the screen.
Step Two
When prompted save the download to your desktop
Step Three
Double click the downloaded gp_win_rc5_b2.zip file then drag the greenpois0n.exe file to the desktop. Double greenpois0n.exe from the desktop to launch the application
Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button
Step Five
You will now be instructed on how to place your iPhone into DFU mode.
You will be asked to press and hold the sleep button for 2 seconds.
Continue holding sleep; press and hold home for 10 seconds
Release sleep button; continue holding home for 15 seconds.
Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.
Step Seven
Greenpois0n will now jailbreak your device
Step Eight
Click the Quit button once the software application has completed.
You'll notice some verbose mode text scrolling on your device.
Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.
Step Ten
Press to select Cydia then press the large Install Cydia button that appears.
Step Eleven
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Twelve
Restart your iPhone then run Cydia.
you should do it like this: (using
04-23-2011, 02:21 PM
#7
.DiGiTaLTwO.
ii Love My Life <3
Originally posted by anddrew
I know bro, when I make other I will do it thanks !
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
Originally posted by MrRa1n
Sweet, nice work brah :y:
Thanks for you bro
04-25-2011, 12:53 AM
#9
.DiGiTaLTwO.
ii Love My Life <3
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
