(adsbygoogle = window.adsbygoogle || []).push({}); Hey guys, so, I'm showing you all how I made my lagswitch / what's my setup for it. Hopefully you'll manage to do it yourself, if not, just PM me and I'll try to help you ASAP!

You'll need 5 things:
A sharp blade cutter(A knife will do the trick), a wire cutter(to strip the cables), a screwdriver(to unscrew the screws at the lightswitch), a light switch(to control your "lags" and "unlags") , a ethernet cable(obvious -.-)
Now Starting to make the Lagswitch:
1st thing to do - Strip the ethernet cable(the outside of the cable, without cutting the ones inside) then, cut the orange or the green one in half(some say orange for teleporting and green for freezing. for me orange worked for both lags) then plug one end directly into the modem / router and the other end to the ps3.
-----------------STOP HERE---------------------
WATCH THE VIDEO I MADE
Then go to your ps3 internet settings, and choose Setup:
-Choose to manually set it up.
-Select the option to use 10-Tbase-full.
-Then set your mtu to 1500.
OK now this is where it tricks people.
Sometimes when u flip outside of a MGO match it says "Ethernet cable unplugged", the trick is when you are in a game it won't do that
but it will freeze everyone in the game allowing you to shoot them no matter where they run or hide. If you see them and flip your lagswitch and they will freeze. You got 4-5 secs to kill him before you get the CNS(Conection Non Stable) Message.
If you see them they're basically dead.
the downfall is you will get CNS error after 4-5 seconds of leaving it on, but you can work with it.
Sometimes it takes a few restarts of your modem and ps3 to get the lag to work so I suggest getting a buddy
and testing it out in a private match.
NOTE: The guy you shoot will not die until you unflip / "unlag". And your name most likely will not show on the killfeed you only know if you killed him if the +3 killcount shows up in the lower right above your weapons menu.
Also you wont die until you unflip. Hence the "OMFG WTF HES DEAD AND HES STILL GOALING!" They just leave the Ls on for 4-5 secs while goaling so they wont die. DO NOT LEAVE IT ON FOR MORE THAN 5-6 SECS OR YOU WILL DISCONECT.
Have Fun Lagswitching

[ame=https://www.youtube.com/watch?v=diCaO3A548Y&feature=player_embedded]YouTube - [MGO] How to Build a Lagswitch (HD)[/ame]

Lie ... u need to join on 1.36 update of Mgo u can't get more 2 seconds

you can with this set-up

If you plug in the lag switch from modem to router you wont disconnect
If you get a Ethernet adapter , which turns one ethernet socket into atleast 5 you plug the lagswitch between the router and adapter . And the Ethernet into the splitter and ps3.

btw i had this setup about 2 years ago and with the new update i get only 2 seconds Freeze -.-"

idk what you talking about, this works fine for me, also this is a tutorial for MGO? maybe you talking about CoD?

Im talking about CoD
And Whats MGO?

xD MGO stands for Metal Gear Online its an epic game man u shud try it :p if u watch the whole vid there close to the end theres me Lagswitching in this game^^ check it out

---------- Post added at 01:09 PM ---------- Previous post was at 12:45 PM ----------



well it works good for me

I get 20 seconds freezing. GG

nice job bro