[3.55 JB Guide] 3.56+ Custom firmware

[-Collins-]

Jailbreak/CFW for 3.56+

Spoiler:

Long story short..THERE ISNT ONE YET. . . . Ever since i've been a member of TTG, ive been seeing constant topics asking is there CFW for 3.60, when is it going to be released for 3.66, can i jailbreak 3.72 ? Answer is no. If you dont have 3.55 you cant do anything. It is possible to downgrade. But if you do not have a console that is running 3.55, You cannot jailbreak, use homebrew, or play backups. 99% of the things being posted are false. Mostly just a 3.55 firmware modified to say its 3.73 .There is absolutely no CFW or jailbreak methods for any firmware above 3.55. If there is its not going to be released for a while.. You guys should read the sticky's before creating new threads that cause problems and add on to the rest of the spam here on TTG. There will be CFW for versions 3.56 and up. Just be patient, and dont thrash the devs. That makes you seem ungrateful and then they dont release things to us. If you want to keep up with the news on cfw for 3.60+ just watch my topics. I dont post any fake info.

IF YOU ARE IN Official Firmware 3.56 DO NOT DO ANY OF THIS. YOUR PS3 WILL BRICK

As Exhaler mentioned in his tutorial:
I DO NOT TAKE RESPONSIBILITY IF YOUR PS3 GETS DESTROYED IN ANY WAY AND THESE FILES ARE NOT DONE BY ME
THIS TUTORIAL IS FOR LEARNING PURPOSES ONLY. WE DO NOT CONDONE PIRACY.
Read the note in the end of this post.

Furthermore, If you do not follow this Tutorial to the letter you will BRICK your PS3.


We will need:
- Any PS3 System
- A USB KEY ( FORMATTED AS FAT 32)
DOWNLOAD 1: CFW Kmeaw 3.55
DOWNLOAD 2: Kmeaw backup managers enable.pkg de Kmeaw:
DOWNLOAD 3: MultiMAN v1.15.05

IMPORTANT:
You need to be In Official Firmware (OFW) 3.55 to be able to follow this tutorial. IF YOU HAVE IT GO TO STEP1.

IF THIS IS NOT THE CASE:
1- You are at a FW below 3.55 : GO TO PREPARATION 0-A
2- You are at any Custom Firmware (CFW) go to PREPARATION 0-B

PREPARATION 0-A:
We will update the PS3 to an OFW 3.55
- USING A USB
You can download the OFW 3.55 here:

Place the file on the USB key in this way:KEY USB/PS3/UPDATE/PS3UPDAT.PUP

Turn on Ps3 and then
Insert the USB into your PS3 and then go to: System update.
Follow the on screen instructions.
Now you can go to STEP1

- Using the regular Ps3 update system.


Preparation 0-B
We are at a CFW and we need to get to OFW 3.55

Download the OFW 3.55:

Place the file on the USB key in this way:KEY USB/PS3/UPDATE/PS3UPDAT.PUP

Turn on the ps3 in service mode:

How to get access to service mode

1. Make sure the PS3 is turned off,
2. Press and hold the power button on the PS3 it will power on then power off.
3. When it's off press and hold the power button again until you hear two consecutive beeps.
4. It will ask for the controller to be connected via the USB cable,
5. Turn on the controller and you will have access to the menu.

Insert the USB in the Extreme right USB slot
Select system update and follow the On-screen instructions.

Now you can proceed to step 1.

STEP 1 Install CFW KMEAW
Once we have the PS3 on OFW 3.55. we can Install Kmeaw.
To do that: we need to place the downloaded file we got from DOWNLOAD 1
like this on the USB: /PS3/UPDATE/PS3UPDAT.PUP

Then we need to go to service mode:
How to get access to service mode

1. Make sure the PS3 is turned off,
2. Press and hold the power button on the PS3 it will power on then power off.
3. When it's off press and hold the power button again until you hear two consecutive beeps.
4. It will ask for the controller to be connected via the USB cable,
5. Turn on the controller and you will have access to the menu.

Insert the USB in the Extreme right USB slot
Select system update and follow the On-screen instructions.

Now we have CFW kmeaw installed.

STEP 2 INSTALL BACKUP MANAGER ENABLE (lv2.pkg) OMG OMG OMG Patcher

Place on the root of your USB Key the file lv2.pkg -> DOWNLOAD 2

Insert USB in the extreme right USB slot

Go to games> Install Package Files and select lv2.pkg

When the installation is complete.

Run the file OMG OMG OMG lv2 patcher

You will get a msg "Hello from Russia"

Press x to exit.

STEP 3 INSTALL Multiman MANAGER

PLACE on the root of your USB key the file that you got from DOWNLOAD 3 called
multiMAN ver 1.15.05 BASE [20110211_180000].pkg

Now,

Go to games > Install Package Files and select multiMAN ver 1.15.05 BASE [20110211_180000].pkg

When the installation is complete.

Run Multiman manager.

STEP 4 BACK UP A GAME
TWO choices:
You can backup a game to your internal hard drive
Or you can use an external hard disk

Lets begin by internal hard drive:
Insert A Blu ray disk
Click on copy game and then click YES.
Wait for the backup to complete (IT TAKES TIME ... )
Click X when prompted to do so

You will return to the main screen of Multiman manager:
Remove your blu ray disk so you can see only the backed up game files
Click load game
You will return to the XMB
Insert any other blu ray game
It will load as the game you backed up
Click ON Disk icon
Enjoy!

External HARD drive
You will need to format your hard drive to FAT32 (otherwise it will not work)
PLUG in hard drive to extreme right USB slot
Insert A Blu ray disk
Click on copy game and then click NO.
THEN CLICK YES
Wait for the backup to complete (IT TAKES TIME ... )
Click X when prompted to do so

You will return to the main screen of Multiman manager:
Remove your blu ray disk so you can see only the backed up game files
Click load game
You will return to the XMB
Insert any other blu ray game
It will load as the game you backed up
Click ON Disk icon
Enjoy!
EXTERNAL HARD DISK NOTE:
The fat32 system does not allow files more than 4gb to be written on it.
So while backing up to an external hard disk Multiman manager will split files larger than 4gb to files that are 4 gb of size.
So if it happens to a game you cannot load it Directly from the external hard disk.
It will give you an error message "cannot load cut files" <- don't really remember the message.
So what you need to do is copy back the game from the external hard drive to the internal using Multiman.
DO NOT RE-BACK UP the game on the internal hard drive.

[ii-ViViD]

What is the point of this....

[UnTaMeD-KiD]

i agree ^ completely pointless, its even stickied wtf?

[-Collins-]

its for people who would like to be on 3.56

[SherryBirkin]

so whys this stickied pretty sure this is the same thing as this

[GangstaCupcake1]

My only question is why is this stickied?

[-Collins-]

my only question is why everyone hating

its not your thread so u all got nothing to worry about

[The Decepticon]

Jailbreak/CFW for 3.56+

Spoiler:

Long story short..THERE ISNT ONE YET. . . . Ever since i've been a member of TTG, ive been seeing constant topics asking is there CFW for 3.60, when is it going to be released for 3.66, can i jailbreak 3.72 ? Answer is no. If you dont have 3.55 you cant do anything. It is possible to downgrade. But if you do not have a console that is running 3.55, You cannot jailbreak, use homebrew, or play backups. 99% of the things being posted are false. Mostly just a 3.55 firmware modified to say its 3.73 .There is absolutely no CFW or jailbreak methods for any firmware above 3.55. If there is its not going to be released for a while.. You guys should read the sticky's before creating new threads that cause problems and add on to the rest of the spam here on TTG. There will be CFW for versions 3.56 and up. Just be patient, and dont thrash the devs. That makes you seem ungrateful and then they dont release things to us. If you want to keep up with the news on cfw for 3.60+ just watch my topics. I dont post any fake info.

IF YOU ARE IN Official Firmware 3.56 DO NOT DO ANY OF THIS. YOUR PS3 WILL BRICK

As Exhaler mentioned in his tutorial:
I DO NOT TAKE RESPONSIBILITY IF YOUR PS3 GETS DESTROYED IN ANY WAY AND THESE FILES ARE NOT DONE BY ME
THIS TUTORIAL IS FOR LEARNING PURPOSES ONLY. WE DO NOT CONDONE PIRACY.
Read the note in the end of this post.

Furthermore, If you do not follow this Tutorial to the letter you will BRICK your PS3.


We will need:
- Any PS3 System
- A USB KEY ( FORMATTED AS FAT 32)
DOWNLOAD 1: CFW Kmeaw 3.55
DOWNLOAD 2: Kmeaw backup managers enable.pkg de Kmeaw:
DOWNLOAD 3: MultiMAN v1.15.05

IMPORTANT:
You need to be In Official Firmware (OFW) 3.55 to be able to follow this tutorial. IF YOU HAVE IT GO TO STEP1.

IF THIS IS NOT THE CASE:
1- You are at a FW below 3.55 : GO TO PREPARATION 0-A
2- You are at any Custom Firmware (CFW) go to PREPARATION 0-B

PREPARATION 0-A:
We will update the PS3 to an OFW 3.55
- USING A USB
You can download the OFW 3.55 here:

Place the file on the USB key in this way:KEY USB/PS3/UPDATE/PS3UPDAT.PUP

Turn on Ps3 and then
Insert the USB into your PS3 and then go to: System update.
Follow the on screen instructions.
Now you can go to STEP1

- Using the regular Ps3 update system.


Preparation 0-B
We are at a CFW and we need to get to OFW 3.55

Download the OFW 3.55:

Place the file on the USB key in this way:KEY USB/PS3/UPDATE/PS3UPDAT.PUP

Turn on the ps3 in service mode:

How to get access to service mode

1. Make sure the PS3 is turned off,
2. Press and hold the power button on the PS3 it will power on then power off.
3. When it's off press and hold the power button again until you hear two consecutive beeps.
4. It will ask for the controller to be connected via the USB cable,
5. Turn on the controller and you will have access to the menu.

Insert the USB in the Extreme right USB slot
Select system update and follow the On-screen instructions.

Now you can proceed to step 1.

STEP 1 Install CFW KMEAW
Once we have the PS3 on OFW 3.55. we can Install Kmeaw.
To do that: we need to place the downloaded file we got from DOWNLOAD 1
like this on the USB: /PS3/UPDATE/PS3UPDAT.PUP

Then we need to go to service mode:
How to get access to service mode

1. Make sure the PS3 is turned off,
2. Press and hold the power button on the PS3 it will power on then power off.
3. When it's off press and hold the power button again until you hear two consecutive beeps.
4. It will ask for the controller to be connected via the USB cable,
5. Turn on the controller and you will have access to the menu.

Insert the USB in the Extreme right USB slot
Select system update and follow the On-screen instructions.

Now we have CFW kmeaw installed.

STEP 2 INSTALL BACKUP MANAGER ENABLE (lv2.pkg) OMG OMG OMG Patcher

Place on the root of your USB Key the file lv2.pkg -> DOWNLOAD 2

Insert USB in the extreme right USB slot

Go to games> Install Package Files and select lv2.pkg

When the installation is complete.

Run the file OMG OMG OMG lv2 patcher

You will get a msg "Hello from Russia"

Press x to exit.

STEP 3 INSTALL Multiman MANAGER

PLACE on the root of your USB key the file that you got from DOWNLOAD 3 called
multiMAN ver 1.15.05 BASE [20110211_180000].pkg

Now,

Go to games > Install Package Files and select multiMAN ver 1.15.05 BASE [20110211_180000].pkg

When the installation is complete.

Run Multiman manager.

STEP 4 BACK UP A GAME
TWO choices:
You can backup a game to your internal hard drive
Or you can use an external hard disk

Lets begin by internal hard drive:
Insert A Blu ray disk
Click on copy game and then click YES.
Wait for the backup to complete (IT TAKES TIME ... )
Click X when prompted to do so

You will return to the main screen of Multiman manager:
Remove your blu ray disk so you can see only the backed up game files
Click load game
You will return to the XMB
Insert any other blu ray game
It will load as the game you backed up
Click ON Disk icon
Enjoy!

External HARD drive
You will need to format your hard drive to FAT32 (otherwise it will not work)
PLUG in hard drive to extreme right USB slot
Insert A Blu ray disk
Click on copy game and then click NO.
THEN CLICK YES
Wait for the backup to complete (IT TAKES TIME ... )
Click X when prompted to do so

You will return to the main screen of Multiman manager:
Remove your blu ray disk so you can see only the backed up game files
Click load game
You will return to the XMB
Insert any other blu ray game
It will load as the game you backed up
Click ON Disk icon
Enjoy!
EXTERNAL HARD DISK NOTE:
The fat32 system does not allow files more than 4gb to be written on it.
So while backing up to an external hard disk Multiman manager will split files larger than 4gb to files that are 4 gb of size.
So if it happens to a game you cannot load it Directly from the external hard disk.
It will give you an error message "cannot load cut files" <- don't really remember the message.
So what you need to do is copy back the game from the external hard drive to the internal using Multiman.
DO NOT RE-BACK UP the game on the internal hard drive.

CREDIT TO TTG

THANKS FOR THE STICKY SUB ZERO

Thanks for the post i have a ps3 thats on 3.56

[The Decepticon]

Jailbreak/CFW for 3.56+

Spoiler:

Long story short..THERE ISNT ONE YET. . . . Ever since i've been a member of TTG, ive been seeing constant topics asking is there CFW for 3.60, when is it going to be released for 3.66, can i jailbreak 3.72 ? Answer is no. If you dont have 3.55 you cant do anything. It is possible to downgrade. But if you do not have a console that is running 3.55, You cannot jailbreak, use homebrew, or play backups. 99% of the things being posted are false. Mostly just a 3.55 firmware modified to say its 3.73 .There is absolutely no CFW or jailbreak methods for any firmware above 3.55. If there is its not going to be released for a while.. You guys should read the sticky's before creating new threads that cause problems and add on to the rest of the spam here on TTG. There will be CFW for versions 3.56 and up. Just be patient, and dont thrash the devs. That makes you seem ungrateful and then they dont release things to us. If you want to keep up with the news on cfw for 3.60+ just watch my topics. I dont post any fake info.

IF YOU ARE IN Official Firmware 3.56 DO NOT DO ANY OF THIS. YOUR PS3 WILL BRICK

As Exhaler mentioned in his tutorial:
I DO NOT TAKE RESPONSIBILITY IF YOUR PS3 GETS DESTROYED IN ANY WAY AND THESE FILES ARE NOT DONE BY ME
THIS TUTORIAL IS FOR LEARNING PURPOSES ONLY. WE DO NOT CONDONE PIRACY.
Read the note in the end of this post.

Furthermore, If you do not follow this Tutorial to the letter you will BRICK your PS3.


We will need:
- Any PS3 System
- A USB KEY ( FORMATTED AS FAT 32)
DOWNLOAD 1: CFW Kmeaw 3.55
DOWNLOAD 2: Kmeaw backup managers enable.pkg de Kmeaw:
DOWNLOAD 3: MultiMAN v1.15.05

IMPORTANT:
You need to be In Official Firmware (OFW) 3.55 to be able to follow this tutorial. IF YOU HAVE IT GO TO STEP1.

IF THIS IS NOT THE CASE:
1- You are at a FW below 3.55 : GO TO PREPARATION 0-A
2- You are at any Custom Firmware (CFW) go to PREPARATION 0-B

PREPARATION 0-A:
We will update the PS3 to an OFW 3.55
- USING A USB
You can download the OFW 3.55 here:

Place the file on the USB key in this way:KEY USB/PS3/UPDATE/PS3UPDAT.PUP

Turn on Ps3 and then
Insert the USB into your PS3 and then go to: System update.
Follow the on screen instructions.
Now you can go to STEP1

- Using the regular Ps3 update system.


Preparation 0-B
We are at a CFW and we need to get to OFW 3.55

Download the OFW 3.55:

Place the file on the USB key in this way:KEY USB/PS3/UPDATE/PS3UPDAT.PUP

Turn on the ps3 in service mode:

How to get access to service mode

1. Make sure the PS3 is turned off,
2. Press and hold the power button on the PS3 it will power on then power off.
3. When it's off press and hold the power button again until you hear two consecutive beeps.
4. It will ask for the controller to be connected via the USB cable,
5. Turn on the controller and you will have access to the menu.

Insert the USB in the Extreme right USB slot
Select system update and follow the On-screen instructions.

Now you can proceed to step 1.

STEP 1 Install CFW KMEAW
Once we have the PS3 on OFW 3.55. we can Install Kmeaw.
To do that: we need to place the downloaded file we got from DOWNLOAD 1
like this on the USB: /PS3/UPDATE/PS3UPDAT.PUP

Then we need to go to service mode:
How to get access to service mode

1. Make sure the PS3 is turned off,
2. Press and hold the power button on the PS3 it will power on then power off.
3. When it's off press and hold the power button again until you hear two consecutive beeps.
4. It will ask for the controller to be connected via the USB cable,
5. Turn on the controller and you will have access to the menu.

Insert the USB in the Extreme right USB slot
Select system update and follow the On-screen instructions.

Now we have CFW kmeaw installed.

STEP 2 INSTALL BACKUP MANAGER ENABLE (lv2.pkg) OMG OMG OMG Patcher

Place on the root of your USB Key the file lv2.pkg -> DOWNLOAD 2

Insert USB in the extreme right USB slot

Go to games> Install Package Files and select lv2.pkg

When the installation is complete.

Run the file OMG OMG OMG lv2 patcher

You will get a msg "Hello from Russia"

Press x to exit.

STEP 3 INSTALL Multiman MANAGER

PLACE on the root of your USB key the file that you got from DOWNLOAD 3 called
multiMAN ver 1.15.05 BASE [20110211_180000].pkg

Now,

Go to games > Install Package Files and select multiMAN ver 1.15.05 BASE [20110211_180000].pkg

When the installation is complete.

Run Multiman manager.

STEP 4 BACK UP A GAME
TWO choices:
You can backup a game to your internal hard drive
Or you can use an external hard disk

Lets begin by internal hard drive:
Insert A Blu ray disk
Click on copy game and then click YES.
Wait for the backup to complete (IT TAKES TIME ... )
Click X when prompted to do so

You will return to the main screen of Multiman manager:
Remove your blu ray disk so you can see only the backed up game files
Click load game
You will return to the XMB
Insert any other blu ray game
It will load as the game you backed up
Click ON Disk icon
Enjoy!

External HARD drive
You will need to format your hard drive to FAT32 (otherwise it will not work)
PLUG in hard drive to extreme right USB slot
Insert A Blu ray disk
Click on copy game and then click NO.
THEN CLICK YES
Wait for the backup to complete (IT TAKES TIME ... )
Click X when prompted to do so

You will return to the main screen of Multiman manager:
Remove your blu ray disk so you can see only the backed up game files
Click load game
You will return to the XMB
Insert any other blu ray game
It will load as the game you backed up
Click ON Disk icon
Enjoy!
EXTERNAL HARD DISK NOTE:
The fat32 system does not allow files more than 4gb to be written on it.
So while backing up to an external hard disk Multiman manager will split files larger than 4gb to files that are 4 gb of size.
So if it happens to a game you cannot load it Directly from the external hard disk.
It will give you an error message "cannot load cut files" <- don't really remember the message.
So what you need to do is copy back the game from the external hard drive to the internal using Multiman.
DO NOT RE-BACK UP the game on the internal hard drive.

CREDIT TO TTG

THANKS FOR THE STICKY SUB ZERO

Thanks for the post i have a ps3 thats on 3.56

[-Collins-]

Thanks bro i have a ps3 thats on 3.56 !

---------- Post added at 10:16 PM ---------- Previous post was at 10:14 PM ----------

Sorry for that my PC was mest up ! Delete those please .

sorry for what and delete what ?