(adsbygoogle = window.adsbygoogle || []).push({});

• You must login or register to view this content.
  
• You must login or register to view this content.
  

(Use the AT90USBKEY file, not AT90USBKEY2 or any other file or this wont work..Ignore instructions too, thats an old tut for BlackCat boards.)

1.) You must login or register to view this content.


2.) When installed，go to installation folder, namely Atmel\Flip 3.4.2\usb\, find libusb0.dll and libusb0_x64.dll, copy them to folder Flip 3.4.2\bin


3.) Then plug PSjailbreak into USB port in PC, the red green light will light up.


4.) Meanwhile PC reminds you that unusable unkown device found.


5.) Ignore it, wait for a few seconds, new hardware AT90USB162 DFU will be found, pc asks you to provide driver,


You must login or register to view this content.


6.) choose USB folder in Flip as the Install Path, for example Atmel\Flip 3.4.2\usb\


You must login or register to view this content.


7.) then the installation begins.


You must login or register to view this content.


8.) When the driver is installed, we can write on AT90USB162.


You must login or register to view this content.


9.) Run Flip, go to Device -> Select..., and choose AT90USB162


You must login or register to view this content.


10.) Then go to File -> Load HEX File...


You must login or register to view this content.


11.) Choose the HEX file you want to write into, (Choose one of the files provided at the top of the post)


Attention: HEX must be put in the English path so that it can be read


12.) Then you can see HEX file parsed shown in the left bottom.


You must login or register to view this content.


13.) Then go to Settings -> Communication ->USB, choose OPEN USB port.


You must login or register to view this content.


14.) Then the chip is open and ready to be written.


You must login or register to view this content.


15.) Check HEX File, make sure if it’s the right HEX that you want to write into.

Originally posted by another user

IF YOU GET THE VERIFY FAILED ERROR , CLICK THE "READ TARGET DEVICE MEMORY" TO READ THE CHIP , DO THIS 3-4 TIMES THEN CLICK RUN AGAIN!

16.) Choose RUN in the left bottom, then the chip is being written. It will be done in a few seconds. You will see Verify PASS in the left bottom when it’s finished.


You must login or register to view this content.


Now the chip has been written. Turn off Flip and unplug the PS jailbreak dongle out of PC.





Good Luck, Have Fun
SOTK

Ive got this version.. Ill edit the post but you need this specific clone for this to work..

You must login or register to view this content.

NOTE: THE SLIT IN THE CHIP WERE THE LIGHTS ARE!

I Did everything Right & Exact Same, It Said all The Stuff It Was Ment To & No Errors, I Turned Off My Ps3 & Put In My PSJB Clone & Turned On & Hit Power, Eject & Nothing Happing, How Do I Get It Into Service Mode?

will it work with a ipod nano 1g with hermes v4

I get the same issue, its the HEX file, It must be for an older firmware, ive spent hours today looking for a working HEX.. will update the minute I confirm a working HEX

Testing a bunch of HEX files, should hopefully find a working one soon.

Deleted Post By User

FLIP 3.4.2 is the latest version.. its an updated HEX file we need to find, I think I may have something but its pretty complicated.. Trying to figure it out.

FLIP is just used to program the HEX to the chip, the HEX is the jailbreak file.

Download & Try This You must login or register to view this content.
If It Works Remeber To Give Credit & Also PM Telling Me If It Woked Or Didnt, Ill Put Down Link Of Thing That You Can Try

Alright ill try it. brb

---------- Post added at 04:45 PM ---------- Previous post was at 04:43 PM ----------

Didnt work, already tried this one earlier.. will give it another shot though.

Any news for the Ti 84?