Post: How To Fix Data Corrupted (8002F169) Using 999 Downgrader
Options
01-31-2013, 08:35 PM
#1
BrinkerzHD
Ex PS3 Modder
Fix Data Corrupted Error when using 999 downgrader!
Ok this tutorial is going to fix your Data Corrupted (8002F169) when trying to downgrade using the 999 Rebug Downgrader. I wanted to go back to 3.55 to get my eid root key to change my PS3 from CEX to DEX, but couldn't because when I tried to downgrade using the 999 Downgrader i got Data Corrupted, I tried every solution possible and I finally found it
If this has already been posted then by all means close it.
Downloads Needed :
The Downgrader : You must login or register to view this content. (Ignore the 4.25 to 3.55, this can be done on 4.31 if spkg check is removed)
Toggle QA PKG : You must login or register to view this content.
(Note, If you want to go to for eg KMEAW CFW also have this downloaded)
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
1. Download the Downgrader PUP, and rename the file to “PS3UPDAT.PUP”
2. In your USB flash drive or external HDD, create a new folder and name it “PS3″
3. Inside the “PS3″ folder, create a new folder and this time name it “UPDATE”
4. Copy the Downgrader PUP (which is now named “PS3UPDAT.PUP”
inside the “UPDATE” folder
5. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media”
6. Follow any onscreen instructions that would come up.
7. Once the update is finished, you will now be on a Hybrid CFW 3.55, it will still show you have your old Firmware version from system settings (this is normal)
8. Enable QA Toggle flag:
8a. Download the QA Toggle pkg
8b. Copy the file to the root of your USB or external HD
8c. Insert your USB/External HD to your PS3
8d. On your PS3, go to “Install package Files” and install the QA Toggle PKG
8e. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
8f. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (its hard you might want to get an extra hand for this)
8g. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.
9. Now we can install either an Official Firmware 3.55 ( do not install any OFW higher than 3.55!), or 3.55 Kmeaw or Rogero 3.55 or any other CFW you wish. Here we will install KMEAW 3.55
10. Take your desired CFW and rename the file to “PS3UPDAT.PUP”
11. In your USB or External HD, go to PS3 then UPDATE and replace the old “PS3UPDAT.PUP” (downgrader PUP) with the new “PS3UPDAT.PUP” (Rogero 3.55 cfw)
12. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media” (It has been reported that doing this in recovery mode is more successful!)
13. Follow any onscreen instructions that would come up.
14. And your done! You are now on KMEAW 3.55 CFW.
Now you can use your PS3 on 3.55 and do whatever you want, wether it's to go to DEX or grab your eid root key to go to DEX on 4.21
NOTE - I am not responsible for anything that may happen when doing this, do this under your own risk
Ok this tutorial is going to fix your Data Corrupted (8002F169) when trying to downgrade using the 999 Rebug Downgrader. I wanted to go back to 3.55 to get my eid root key to change my PS3 from CEX to DEX, but couldn't because when I tried to downgrade using the 999 Downgrader i got Data Corrupted, I tried every solution possible and I finally found it
If this has already been posted then by all means close it.
Downloads Needed :
The Downgrader : You must login or register to view this content. (Ignore the 4.25 to 3.55, this can be done on 4.31 if spkg check is removed)
Toggle QA PKG : You must login or register to view this content.
(Note, If you want to go to for eg KMEAW CFW also have this downloaded)
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
1. Download the Downgrader PUP, and rename the file to “PS3UPDAT.PUP”
2. In your USB flash drive or external HDD, create a new folder and name it “PS3″
3. Inside the “PS3″ folder, create a new folder and this time name it “UPDATE”
4. Copy the Downgrader PUP (which is now named “PS3UPDAT.PUP”
inside the “UPDATE” folder5. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media”
6. Follow any onscreen instructions that would come up.
7. Once the update is finished, you will now be on a Hybrid CFW 3.55, it will still show you have your old Firmware version from system settings (this is normal)
8. Enable QA Toggle flag:
8a. Download the QA Toggle pkg
8b. Copy the file to the root of your USB or external HD
8c. Insert your USB/External HD to your PS3
8d. On your PS3, go to “Install package Files” and install the QA Toggle PKG
8e. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
8f. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (its hard you might want to get an extra hand for this)
8g. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.
9. Now we can install either an Official Firmware 3.55 ( do not install any OFW higher than 3.55!), or 3.55 Kmeaw or Rogero 3.55 or any other CFW you wish. Here we will install KMEAW 3.55
10. Take your desired CFW and rename the file to “PS3UPDAT.PUP”
11. In your USB or External HD, go to PS3 then UPDATE and replace the old “PS3UPDAT.PUP” (downgrader PUP) with the new “PS3UPDAT.PUP” (Rogero 3.55 cfw)
12. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media” (It has been reported that doing this in recovery mode is more successful!)
13. Follow any onscreen instructions that would come up.
14. And your done! You are now on KMEAW 3.55 CFW.
Now you can use your PS3 on 3.55 and do whatever you want, wether it's to go to DEX or grab your eid root key to go to DEX on 4.21
NOTE - I am not responsible for anything that may happen when doing this, do this under your own risk
The following 22 users say thank you to BrinkerzHD for this useful post:
07-10-2014, 08:43 PM
#66
Loxy
< ^ > < ^ >
Originally posted by Anon777
I downgraded from rogero 4.55 to 3.55 999 downgrader and used 3.55 rogero v3.7 to change to any cfw but I wanna go to 4.46.1 d- rex is that possible ?
REBUG D REX is only to installed on Dex consoles, You need to use DEREKTROTTER tut CEX2DDEX if you wanna switch to that firmware
07-11-2014, 12:28 AM
#68
Luxify
Pokemon Trainer
Originally posted by BrinkerzHD
Fix Data Corrupted Error when using 999 downgrader!
Ok this tutorial is going to fix your Data Corrupted (8002F169) when trying to downgrade using the 999 Rebug Downgrader. I wanted to go back to 3.55 to get my eid root key to change my PS3 from CEX to DEX, but couldn't because when I tried to downgrade using the 999 Downgrader i got Data Corrupted, I tried every solution possible and I finally found it
If this has already been posted then by all means close it.
Downloads Needed :
The Downgrader : You must login or register to view this content. (Ignore the 4.25 to 3.55, this can be done on 4.31 if spkg check is removed)
Toggle QA PKG : You must login or register to view this content.
(Note, If you want to go to for eg KMEAW CFW also have this downloaded)
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
1. Download the Downgrader PUP, and rename the file to “PS3UPDAT.PUP”
2. In your USB flash drive or external HDD, create a new folder and name it “PS3″
3. Inside the “PS3″ folder, create a new folder and this time name it “UPDATE”
4. Copy the Downgrader PUP (which is now named “PS3UPDAT.PUP”) inside the “UPDATE” folder
5. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media”
6. Follow any onscreen instructions that would come up.
7. Once the update is finished, you will now be on a Hybrid CFW 3.55, it will still show you have your old Firmware version from system settings (this is normal)
8. Enable QA Toggle flag:
8a. Download the QA Toggle pkg
8b. Copy the file to the root of your USB or external HD
8c. Insert your USB/External HD to your PS3
8d. On your PS3, go to “Install package Files” and install the QA Toggle PKG
8e. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
8f. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (its hard you might want to get an extra hand for this)
8g. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.
9. Now we can install either an Official Firmware 3.55 ( do not install any OFW higher than 3.55!), or 3.55 Kmeaw or Rogero 3.55 or any other CFW you wish. Here we will install KMEAW 3.55
10. Take your desired CFW and rename the file to “PS3UPDAT.PUP”
11. In your USB or External HD, go to PS3 then UPDATE and replace the old “PS3UPDAT.PUP” (downgrader PUP) with the new “PS3UPDAT.PUP” (Rogero 3.55 cfw)
12. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media” (It has been reported that doing this in recovery mode is more successful!)
13. Follow any onscreen instructions that would come up.
14. And your done! You are now on KMEAW 3.55 CFW.
Now you can use your PS3 on 3.55 and do whatever you want, wether it's to go to DEX or grab your eid root key to go to DEX on 4.21
NOTE - I am not responsible for anything that may happen when doing this, do this under your own risk
Ok this tutorial is going to fix your Data Corrupted (8002F169) when trying to downgrade using the 999 Rebug Downgrader. I wanted to go back to 3.55 to get my eid root key to change my PS3 from CEX to DEX, but couldn't because when I tried to downgrade using the 999 Downgrader i got Data Corrupted, I tried every solution possible and I finally found it
If this has already been posted then by all means close it.
Downloads Needed :
The Downgrader : You must login or register to view this content. (Ignore the 4.25 to 3.55, this can be done on 4.31 if spkg check is removed)
Toggle QA PKG : You must login or register to view this content.
(Note, If you want to go to for eg KMEAW CFW also have this downloaded)
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
1. Download the Downgrader PUP, and rename the file to “PS3UPDAT.PUP”
2. In your USB flash drive or external HDD, create a new folder and name it “PS3″
3. Inside the “PS3″ folder, create a new folder and this time name it “UPDATE”
4. Copy the Downgrader PUP (which is now named “PS3UPDAT.PUP”) inside the “UPDATE” folder
5. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media”
6. Follow any onscreen instructions that would come up.
7. Once the update is finished, you will now be on a Hybrid CFW 3.55, it will still show you have your old Firmware version from system settings (this is normal)
8. Enable QA Toggle flag:
8a. Download the QA Toggle pkg
8b. Copy the file to the root of your USB or external HD
8c. Insert your USB/External HD to your PS3
8d. On your PS3, go to “Install package Files” and install the QA Toggle PKG
8e. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
8f. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (its hard you might want to get an extra hand for this)
8g. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.
9. Now we can install either an Official Firmware 3.55 ( do not install any OFW higher than 3.55!), or 3.55 Kmeaw or Rogero 3.55 or any other CFW you wish. Here we will install KMEAW 3.55
10. Take your desired CFW and rename the file to “PS3UPDAT.PUP”
11. In your USB or External HD, go to PS3 then UPDATE and replace the old “PS3UPDAT.PUP” (downgrader PUP) with the new “PS3UPDAT.PUP” (Rogero 3.55 cfw)
12. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media” (It has been reported that doing this in recovery mode is more successful!)
13. Follow any onscreen instructions that would come up.
14. And your done! You are now on KMEAW 3.55 CFW.
Now you can use your PS3 on 3.55 and do whatever you want, wether it's to go to DEX or grab your eid root key to go to DEX on 4.21
NOTE - I am not responsible for anything that may happen when doing this, do this under your own risk
Guys if your trying to get off ITA and this doesn't work just use this downgrader You must login or register to view this content. it worked for me
01-19-2015, 01:23 AM
#71
AutobotAssassin
Little One
im just trying to downgrade to 3.55 to install my new hdd cause the ps3 wont read my usb that has rebug 4.46 on it
02-22-2015, 12:20 AM
#72
alexjones1009
Bounty hunter
Originally posted by BrinkerzHD
Fix Data Corrupted Error when using 999 downgrader!
Ok this tutorial is going to fix your Data Corrupted (8002F169) when trying to downgrade using the 999 Rebug Downgrader. I wanted to go back to 3.55 to get my eid root key to change my PS3 from CEX to DEX, but couldn't because when I tried to downgrade using the 999 Downgrader i got Data Corrupted, I tried every solution possible and I finally found it
If this has already been posted then by all means close it.
Downloads Needed :
The Downgrader : You must login or register to view this content. (Ignore the 4.25 to 3.55, this can be done on 4.31 if spkg check is removed)
Toggle QA PKG : You must login or register to view this content.
(Note, If you want to go to for eg KMEAW CFW also have this downloaded)
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
1. Download the Downgrader PUP, and rename the file to “PS3UPDAT.PUP”
2. In your USB flash drive or external HDD, create a new folder and name it “PS3″
3. Inside the “PS3″ folder, create a new folder and this time name it “UPDATE”
4. Copy the Downgrader PUP (which is now named “PS3UPDAT.PUP”) inside the “UPDATE” folder
5. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media”
6. Follow any onscreen instructions that would come up.
7. Once the update is finished, you will now be on a Hybrid CFW 3.55, it will still show you have your old Firmware version from system settings (this is normal)
8. Enable QA Toggle flag:
8a. Download the QA Toggle pkg
8b. Copy the file to the root of your USB or external HD
8c. Insert your USB/External HD to your PS3
8d. On your PS3, go to “Install package Files” and install the QA Toggle PKG
8e. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
8f. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (its hard you might want to get an extra hand for this)
8g. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.
9. Now we can install either an Official Firmware 3.55 ( do not install any OFW higher than 3.55!), or 3.55 Kmeaw or Rogero 3.55 or any other CFW you wish. Here we will install KMEAW 3.55
10. Take your desired CFW and rename the file to “PS3UPDAT.PUP”
11. In your USB or External HD, go to PS3 then UPDATE and replace the old “PS3UPDAT.PUP” (downgrader PUP) with the new “PS3UPDAT.PUP” (Rogero 3.55 cfw)
12. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media” (It has been reported that doing this in recovery mode is more successful!)
13. Follow any onscreen instructions that would come up.
14. And your done! You are now on KMEAW 3.55 CFW.
Now you can use your PS3 on 3.55 and do whatever you want, wether it's to go to DEX or grab your eid root key to go to DEX on 4.21
NOTE - I am not responsible for anything that may happen when doing this, do this under your own risk
Ok this tutorial is going to fix your Data Corrupted (8002F169) when trying to downgrade using the 999 Rebug Downgrader. I wanted to go back to 3.55 to get my eid root key to change my PS3 from CEX to DEX, but couldn't because when I tried to downgrade using the 999 Downgrader i got Data Corrupted, I tried every solution possible and I finally found it
If this has already been posted then by all means close it.
Downloads Needed :
The Downgrader : You must login or register to view this content. (Ignore the 4.25 to 3.55, this can be done on 4.31 if spkg check is removed)
Toggle QA PKG : You must login or register to view this content.
(Note, If you want to go to for eg KMEAW CFW also have this downloaded)
IMPORTANT!
Remove any discs inside your PS3 when performing the update.
1. Download the Downgrader PUP, and rename the file to “PS3UPDAT.PUP”
2. In your USB flash drive or external HDD, create a new folder and name it “PS3″
3. Inside the “PS3″ folder, create a new folder and this time name it “UPDATE”
4. Copy the Downgrader PUP (which is now named “PS3UPDAT.PUP”) inside the “UPDATE” folder
5. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media”
6. Follow any onscreen instructions that would come up.
7. Once the update is finished, you will now be on a Hybrid CFW 3.55, it will still show you have your old Firmware version from system settings (this is normal)
8. Enable QA Toggle flag:
8a. Download the QA Toggle pkg
8b. Copy the file to the root of your USB or external HD
8c. Insert your USB/External HD to your PS3
8d. On your PS3, go to “Install package Files” and install the QA Toggle PKG
8e. Once installed, run the “Rebug Toggle QA” on your PS3, (The screen will go Black and you will hear 2 or 3 Beeps and when finished it will go back to the PS3′s XMB, and if error comes up, just repeat this step.)
8f. Go to “Network Settings” (do not open it) then all at the same time, press the following key combo : L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down (its hard you might want to get an extra hand for this)
8g. If the QA Flag was done correctly, you will see Edy Viewer, Debug Settings, and Install Package Files.
9. Now we can install either an Official Firmware 3.55 ( do not install any OFW higher than 3.55!), or 3.55 Kmeaw or Rogero 3.55 or any other CFW you wish. Here we will install KMEAW 3.55
10. Take your desired CFW and rename the file to “PS3UPDAT.PUP”
11. In your USB or External HD, go to PS3 then UPDATE and replace the old “PS3UPDAT.PUP” (downgrader PUP) with the new “PS3UPDAT.PUP” (Rogero 3.55 cfw)
12. Insert the USB or external HD on to your PS3 and then go to “System Update” and select “Update Via Storage Media” (It has been reported that doing this in recovery mode is more successful!)
13. Follow any onscreen instructions that would come up.
14. And your done! You are now on KMEAW 3.55 CFW.
Now you can use your PS3 on 3.55 and do whatever you want, wether it's to go to DEX or grab your eid root key to go to DEX on 4.21
NOTE - I am not responsible for anything that may happen when doing this, do this under your own risk
Not even this worked for me I'm trying to help a friend downgrade he was on 4.50 ITA so i switched him over to 4.46 D-REX so we could change from DEX to CEX then when we changed to CEX i'd get this error so I followed this TUT and got stuck with the same fucking error code please help this is starting to piss me off. I did it to my PS3 fine something is going on with his playstation.
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
