(adsbygoogle = window.adsbygoogle || []).push({}); i'd prefer to make this topic STICKY

remember the future of ps3 coming soon this year, u really need to get ready for higher capacity for more incoming games that install itself into H.D ... especially MMORPGS

You must login or register to view this content.

Guide how to Install new hard drive in your PS3

Compatible hard drives need to meet these specifications:

* 2.5" form (generally refered to as a notebook drive)
* Serial ATA interface, also shown as SATA
* 9.5mm Height


Removing the hard disk

1. Touch the power button on the system front for at least two seconds.

The power indicator will turn solid red and the system will enter standby mode.

2. Turn off the system using the main power switch on the system rear.

3. Unplug the AC power cord and detach the other cables from
the system.

For safety reasons, remove the plug for the power cord from the electrical outlet,
and then detach the other cables.

You must login or register to view this content.

Remove the HDD bay cover on the system's left side.

You must login or register to view this content.

You must login or register to view this content.

Use the space at the right edge of the HDD bay cover to pull it out from the system.

If the cover is difficult to remove, gently insert a
small screwdriver in the space and pry the cover off. Be careful not to damage the system or the cover when using a screwdriver.

Free the hard disk from the system.

Remove the blue screw with a crosshead screwdriver.

You must login or register to view this content.

Raise the metal handle.

Slide the hard disk to the right.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.


Remove the hard disk from the system.

You must login or register to view this content.

Use the metal handle to pull the hard disk out from the system.

Replacing the hard disk
When replacing the hard disk, follow the procedure below to remove the metal frame.
You must login or register to view this content.

Use a crosshead screwdriver to remove the screws (4 places).
These screws are very tight, be sure to find a screwdriver that fits very well, and take your time.
If you strip a screw head and want to purchase a replacement screw see the bottom of this post.

You must login or register to view this content.

You must login or register to view this content.

Remove the hard disk from the metal frame.
Lift one end and slide the hard disk out to remove.

You must login or register to view this content.

Place the replacement hard disk on the PS3? system hard disk's metal frame, and then attach using the screws (4 places).
Do not overtighten the screws.

Install the hard disk in the system.
Fully insert the hard disk in the HDD bay, and then slide it to the left. (I find that using your finger works better than the wire for this)

You must login or register to view this content.


Attach the blue screw to lock the hard disk in place.
Reattach the HDD bay cover.

Turn on the PS3? system. and congratulations for ur new 250GB Playstation 3 ^

every single one.

for people who dont like to read

You must login or register to view this content.

Good guide, i'm thinking of updating mine soon.

Your online friends stays on our account.

how much do these hard drives run by ? ( cost lol )

umm.. you use a usb to copy all your information in a storage base ( games saved and utilitys) and sony is really smart ,they made a amazing machine , so it knows by its self