Post: Dead Space 2 Mods [Ps3]
Options
01-30-2011, 03:41 AM
#1
SirBlazeAlot
I ROCK like a fossil
So i KNOW this game has only been out a few days and some want to play through it legit and so on, so if this isnt for you PLEASE move on and TRY to keep the flaming to a minimum.
-----------------------------------------------------------------
I do NOT take credit for these mods, all credits to ps3hax.
[/I]
------------------------------------------------------------------
UPDATE
There is now a premade patch for modding your BIGFILE.VIV file. MUCH QUICKER
Download PPF Patcher from here - You must login or register to view this content.
Download Dead Space 2 patch file from here - You must login or register to view this content.
- Extract them both into a directory along with your BIGFILE0.VIV
- Run ppf-o-matic 3.0.exe
- Next to ISO File, click on the disk image
- Under 'files of type' click and choose 'All Files'
- Now select the BIGFILE0.VIV you want to patch
- Click the disk image next to Patch
- Under 'files of type' click and choose 'All Files'
- Select 'BIGFILE0.VIV.Patch_v2'
- Click 'Apply'
You now have a fully modded BIGFILE0.VIV! Enjoy.
-----------------------------------------------------------------
MANUAL TUTURIAL
Requirements
- CFW 3.55
- Blackbox FTP
- FileZilla
- Hex Editor
- BACKUP of Deadspace 2 (multimanager)
Tutorial
1. Assuming you are on CFW 3.55, fire up blackbox FTP.
2. Next, on your PC , start FileZilla.
3. Now, in the top left box type the IP address shown on your blackbox FTP on your ps3 console, and click "quick connect".
4. Now,on the RIGHT side of filezilla navigate to hdd_0/GAMEZ/BLUS30624/USERID. (If not GAMEZ find the folder your backup manager saves to)
5. Next, on the LEFT side of filezilla navigate to your desktop.
6. On the RIGHT side of filezilla in the USERID folder, find the file "BIGFILE.VIV" and double click it. If done correctly it should have copied this file to your desktop on your PC. -- Minimize filezilla.
7. Open the BIGFILE.VIV file with your hex editor.
8. Now is your hex editor search for "um:BaseValue". Make SURE the offset is "0001E140".
9. Now next to each gun there should be values for range, speed, capacity, ect.
10. Capacity AND damage values can range from 6-99.
EXAMPLE:
Default Value: um:BaseValue("PlasmaCutter", "Capacity", 10)
Modded Value: um:BaseValue("PlasmaCutter", "Capacity",999)
11. Thanks to ps3hax below is a list of ALL the value ranges that can be set for each gun/rig/item
Gun Value Ranges
* Default Value > New Value
Plasma Cutter:
- Range: 20 > 999
- Capacity: 10 > 999
- Damage: 10 > 999
- AltDamage: 10 > 999
- Reload (how fast you reload): 1x > 50x
- Speed (seconds between shots): 1 > .5
- Special (unlockable?): 0 > 1
Javelin Gun:
- Range: 20 > 999
- Capacity: 5 > 99
- Damage: 50 > 999
- AltDamage: 10 > 999
- Reload: 1x > 50x
- Special (unlockable?): 0 > 1
Line Gun:
- Capacity: 5 > 99
- Damage: 15 > 999
- AltDamage: 20 > 999
- Reload: 1x > 50x
- Speed: 1 > .5
- Width (how wide the line you shoot is): 1 > 10
Pulse Rifle:
- Capacity: 50 > 999
- Damage: 5 > 99
- AltDamage: 3 > 99
- Reload: 1x > 50x
Ripper:
- Capacity: 8 > 99
- Damage: 8 > 99
- AltDamage: 20 > 999
- Reload: 1x > 50x
- Duration (how long you can use the blade in seconds): 5 > 99
Flamethrower:
- Capacity: 50 > 999
- Damage: 4 > 99
- AltDamage: 1 > 99
- Reload: 1x > 50x
- Duration (how long fire will burn for in seconds (max VFX=15)): 5 > 15
Contact Beam:
- Capacity: 4 > 99
- Damage: 200 > 9999
- AltDamage: 1 > 99
- Reload: 1x > 50x
- Charge (how long it takes to charge the beam in seconds): .8 > .0
- Special (unlockable?): 0 > 1
Force Gun:
- Capacity: 5 > 99
- Damage: 20 > 999
- AltDamage: 15 > 999
- Reload: 1x > 50x
RIG:
- HP (health): 100 > 9999
- Air (in seconds): 120 > 9999
- Damage: 1 > 99
Stasis Module:
- Energy: 40 > 999
- Duration (how long targets will be affected by stasis in seconds): 8 > 99
- Charge (how long it takes for stasis energy to regerate in seconds): 100 > 0.1
Kinesis Module:
- Range (how far you can grab **** from): 20 > 999
RPG Gun:
- Capacity: 1 > 99
- Damage: 20 > 999
- AltDamage: 1 > 99
- Reload: 1x > 50x
Mine Gun:
- Capacity: 3 > 99
- Damage: 20 > 999
- AltDamage: 1 > 99
- Reload: 1x > 50x
Rivet Gun:
- Capacity: 16 > 999
- Damage: 5 > 99
- AltDamage: 30 > 999
- Reload: 1x > 50x
Seeker Rifle:
- Capacity: 4 > 99
- Damage: 50 > 999
- AltDamage: 50 > 999
- Reload: 1x > 50x
12. Once you have modded the guns and items you want, then save the file and navigate back to filezilla.
13. Double click the BIGFILE.VIV on the LEFT side and it will copy/overwrite the BIGFILE.VIV on your ps3.
14. Once done, exit FTP, restart Platstation 3, and enjoy the mods.
-----------------------------------------------------------------
READ
If you do not own any of the mentioned items in the mods already, And you acquire it AFTER you do the mods, The effects will not reflect on them, You must do the modding again for it to take affect.
-----------------------------------------------------------------
*RECOMMENDED* If you want to go back to playing legit then make sure to copy/backup and SAVE the ORIGINAL BIGFILE.VIV
Last edited by
SirBlazeAlot ; 01-30-2011 at 04:27 PM.
The following 29 users say thank you to SirBlazeAlot for this useful post:
.Illuminati., 0xFa1z, 4th survivor, Agentcell, Asmel, AtlasK, bcb, dazemerson1972, Desert54, drive4567, gameoverrg, Ghost_MW2, HaRdCoRe_NL, HomeWorkPS, ibombo, iNgLewooD64-, Ix Benere xI, j0nny, momotheboss, Mr. Star, pop33, samet2013, Solid Snake, SolidSnake77, styl, ThwiX, TwistedModzV3, Wilisete, Xx-NukeClan-xX
01-30-2011, 06:05 AM
#11
HomeWorkPS
Do a barrel roll!
it only works by changing the backup image of the original disk or from the game installation files??
01-30-2011, 12:23 PM
#13
Ix Benere xI
At least I can fight
I've already completed the game twice and I'm about to run through it on hardcore mode, I'll upload my save once I'm done and then just use the FTP server to copy some of the files and get the trophy.
01-30-2011, 01:13 PM
#15
styl
Sippin' on some SizzurP
I'm testing right now! but first i have to install a CFW, wich allows to play Backups... Then Copy the Game on HDD, Test it and than i write a review if it works
I have finished the game on "Fanatic" (hard) today. Now it's Time to have Fun on Hardcore:bat:
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
I have a save File right before the Endboss comes! But only on "Fanatic" (hard, not Hardcore...)
Also with enough Ammunition! Maybe you can use it...
I have finished the game on "Fanatic" (hard) today. Now it's Time to have Fun on Hardcore:bat:
---------- Post added at 02:13 PM ---------- Previous post was at 02:10 PM ----------
Originally posted by Ix
I've already completed the game twice and I'm about to run through it on hardcore mode, I'll upload my save once I'm done and then just use the FTP server to copy some of the files and get the trophy.
I have a save File right before the Endboss comes! But only on "Fanatic" (hard, not Hardcore...)
Also with enough Ammunition! Maybe you can use it...
01-30-2011, 01:19 PM
#17
Desert54
Gym leader
Originally posted by SirBlazeAlot
Cant see why not, give it a shot, let us know.
Is it supposed to seem as if your dieing? I used the mods and i cant use any health but i don't die lol
BTW to anyone using: You won't die from hits or anything like that BUT you can still die from those things with those orange glowing things on they're arms and some Necromorphs that require you to use Stasis on them, But your stasis lasts like FOREVER so you should be fine lol
And yes this does work
Thanks for the tutorial! +Rep for you.
Last edited by
Desert54 ; 01-30-2011 at 01:29 PM.
01-30-2011, 01:30 PM
#18
ryan saa
At least I can fight
Originally posted by SirBlazeAlot
Ok well i couldnt find a better place for this, so if a better place DOES exist then please move it for me mods. :embarrassed:
So i KNOW this game has only been out a few days and some want to play through it legit and so on, so if this isnt for you PLEASE move on and TRY to keep the flaming to a minimum.
-----------------------------------------------------------------
I do NOT take credit for these mods, all credits to ps3hax.
[/I]
------------------------------------------------------------------
There is now a premade patch for modding your BIGFILE.VIV file. MUCH QUICKER
Download PPF Patcher from here - You must login or register to view this content.
Download Dead Space 2 patch file from here - You must login or register to view this content.
You now have a fully modded BIGFILE0.VIV! Enjoy.
-----------------------------------------------------------------
MANUAL TUTURIAL
Requirements
1. Assuming you are on CFW 3.55, fire up blackbox FTP.
2. Next, on your PC , start FileZilla.
3. Now, in the top left box type the IP address shown on your blackbox FTP on your ps3 console, and click "quick connect".
4. Now,on the RIGHT side of filezilla navigate to hdd_0/GAMEZ/BLUS30624/USERID. (If not GAMEZ find the folder your backup manager saves to)
5. Next, on the LEFT side of filezilla navigate to your desktop.
6. On the RIGHT side of filezilla in the USERID folder, find the file "BIGFILE.VIV" and double click it. If done correctly it should have copied this file to your desktop on your PC. -- Minimize filezilla.
7. Open the BIGFILE.VIV file with your hex editor.
8. Now is your hex editor search for "um:BaseValue". Make SURE the offset is "0001E140".
9. Now next to each gun there should be values for range, speed, capacity, ect.
10. Capacity AND damage values can range from 6-99.
EXAMPLE:
Default Value: um:BaseValue("PlasmaCutter", "Capacity", 10)
Modded Value: um:BaseValue("PlasmaCutter", "Capacity",999)
11. Thanks to ps3hax below is a list of ALL the value ranges that can be set for each gun/rig/item
Gun Value Ranges
* Default Value > New Value
Plasma Cutter:
Javelin Gun:
Line Gun:
Pulse Rifle:
Ripper:
Flamethrower:
Contact Beam:
Force Gun:
RIG:
Stasis Module:
Kinesis Module:
RPG Gun:
Mine Gun:
Rivet Gun:
Seeker Rifle:
12. Once you have modded the guns and items you want, then save the file and navigate back to filezilla.
13. Double click the BIGFILE.VIV on the LEFT side and it will copy/overwrite the BIGFILE.VIV on your ps3.
14. Once done, exit FTP, restart Platstation 3, and enjoy the mods.
-----------------------------------------------------------------
So i KNOW this game has only been out a few days and some want to play through it legit and so on, so if this isnt for you PLEASE move on and TRY to keep the flaming to a minimum.
-----------------------------------------------------------------
I do NOT take credit for these mods, all credits to ps3hax.
[/I]
------------------------------------------------------------------
UPDATE
There is now a premade patch for modding your BIGFILE.VIV file. MUCH QUICKER
Download PPF Patcher from here - You must login or register to view this content.
Download Dead Space 2 patch file from here - You must login or register to view this content.
- Extract them both into a directory along with your BIGFILE0.VIV
- Run ppf-o-matic 3.0.exe
- Next to ISO File, click on the disk image
- Under 'files of type' click and choose 'All Files'
- Now select the BIGFILE0.VIV you want to patch
- Click the disk image next to Patch
- Under 'files of type' click and choose 'All Files'
- Select 'BIGFILE0.VIV.Patch_v2'
- Click 'Apply'
You now have a fully modded BIGFILE0.VIV! Enjoy.
-----------------------------------------------------------------
MANUAL TUTURIAL
Requirements
- CFW 3.55
- Blackbox FTP
- FileZilla
- Hex Editor
- BACKUP of Deadspace 2 (multimanager)
Tutorial
1. Assuming you are on CFW 3.55, fire up blackbox FTP.
2. Next, on your PC , start FileZilla.
3. Now, in the top left box type the IP address shown on your blackbox FTP on your ps3 console, and click "quick connect".
4. Now,on the RIGHT side of filezilla navigate to hdd_0/GAMEZ/BLUS30624/USERID. (If not GAMEZ find the folder your backup manager saves to)
5. Next, on the LEFT side of filezilla navigate to your desktop.
6. On the RIGHT side of filezilla in the USERID folder, find the file "BIGFILE.VIV" and double click it. If done correctly it should have copied this file to your desktop on your PC. -- Minimize filezilla.
7. Open the BIGFILE.VIV file with your hex editor.
8. Now is your hex editor search for "um:BaseValue". Make SURE the offset is "0001E140".
9. Now next to each gun there should be values for range, speed, capacity, ect.
10. Capacity AND damage values can range from 6-99.
EXAMPLE:
Default Value: um:BaseValue("PlasmaCutter", "Capacity", 10)
Modded Value: um:BaseValue("PlasmaCutter", "Capacity",999)
11. Thanks to ps3hax below is a list of ALL the value ranges that can be set for each gun/rig/item
Gun Value Ranges
* Default Value > New Value
Plasma Cutter:
- Range: 20 > 999
- Capacity: 10 > 999
- Damage: 10 > 999
- AltDamage: 10 > 999
- Reload (how fast you reload): 1x > 50x
- Speed (seconds between shots): 1 > .5
- Special (unlockable?): 0 > 1
Javelin Gun:
- Range: 20 > 999
- Capacity: 5 > 99
- Damage: 50 > 999
- AltDamage: 10 > 999
- Reload: 1x > 50x
- Special (unlockable?): 0 > 1
Line Gun:
- Capacity: 5 > 99
- Damage: 15 > 999
- AltDamage: 20 > 999
- Reload: 1x > 50x
- Speed: 1 > .5
- Width (how wide the line you shoot is): 1 > 10
Pulse Rifle:
- Capacity: 50 > 999
- Damage: 5 > 99
- AltDamage: 3 > 99
- Reload: 1x > 50x
Ripper:
- Capacity: 8 > 99
- Damage: 8 > 99
- AltDamage: 20 > 999
- Reload: 1x > 50x
- Duration (how long you can use the blade in seconds): 5 > 99
Flamethrower:
- Capacity: 50 > 999
- Damage: 4 > 99
- AltDamage: 1 > 99
- Reload: 1x > 50x
- Duration (how long fire will burn for in seconds (max VFX=15)): 5 > 15
Contact Beam:
- Capacity: 4 > 99
- Damage: 200 > 9999
- AltDamage: 1 > 99
- Reload: 1x > 50x
- Charge (how long it takes to charge the beam in seconds): .8 > .0
- Special (unlockable?): 0 > 1
Force Gun:
- Capacity: 5 > 99
- Damage: 20 > 999
- AltDamage: 15 > 999
- Reload: 1x > 50x
RIG:
- HP (health): 100 > 9999
- Air (in seconds): 120 > 9999
- Damage: 1 > 99
Stasis Module:
- Energy: 40 > 999
- Duration (how long targets will be affected by stasis in seconds): 8 > 99
- Charge (how long it takes for stasis energy to regerate in seconds): 100 > 0.1
Kinesis Module:
- Range (how far you can grab **** from): 20 > 999
RPG Gun:
- Capacity: 1 > 99
- Damage: 20 > 999
- AltDamage: 1 > 99
- Reload: 1x > 50x
Mine Gun:
- Capacity: 3 > 99
- Damage: 20 > 999
- AltDamage: 1 > 99
- Reload: 1x > 50x
Rivet Gun:
- Capacity: 16 > 999
- Damage: 5 > 99
- AltDamage: 30 > 999
- Reload: 1x > 50x
Seeker Rifle:
- Capacity: 4 > 99
- Damage: 50 > 999
- AltDamage: 50 > 999
- Reload: 1x > 50x
12. Once you have modded the guns and items you want, then save the file and navigate back to filezilla.
13. Double click the BIGFILE.VIV on the LEFT side and it will copy/overwrite the BIGFILE.VIV on your ps3.
14. Once done, exit FTP, restart Platstation 3, and enjoy the mods.
-----------------------------------------------------------------
*RECOMMENDED* If you want to go back to playing legit then make sure to copy/backup and SAVE the ORIGINAL BIGFILE.VIV
Do you still get trophies?
Last edited by
ryan saa ; 01-30-2011 at 01:32 PM.
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
