Post: How To Convert PS3 To DEX and Get Online 4.50ita [ Easy TuT + Links ]
Options
01-14-2014, 12:06 AM
#1
mastakiller13
Grunt
FOLLOW THESE STEPS CAREFULLY
I AM NOT RESPONSIBLE OF ANY BRICKS
FOLLOW AT YOUR OWN RISKS!
STEPS:
Start off here:
INSTALL OFW ( OFFICIAL FIRMWARE ) 3.55.
You must login or register to view this content.
JAILBREAK YOUR PS3 WITH KMEAW CFW.
You must login or register to view this content.
Go to the computer, download and install these on the ps3:
INSTALL QA FLAGS! ( TO DOWNGRADE WITHOUT E3 FLASHER )
You must login or register to view this content.
RUN QA FLAGS ( SHOULD GET BLACK SCREEN AND THEN GO BACK TO XMB )
INSTALL EEID ROOT KEY DUMPPER!
You must login or register to view this content.
RUN THE EEID ROOT KEY DUMPPER. ( PS3 SHOULD SHUTDOWN. JUST TURN IT BACK ON )
INSTALL MULTIMAN
You must login or register to view this content.
OPEN MULTIMAN AND USE THE DESKTOP FILEMANAGER
OPEN dev_hdd0 THEN tmp
COPY EEID ROOT KEY TO USB BY THESE STEPS:
---------------------------------------------------------------------
PRESS X ONCE, THEN CIRCLE COPY IT
GO BACK TO dev_USB000 AND PRESS O AND PAST
---------------------------------------------------------------------
Once done with the steps above, download and install these on your CFW:
INSTALL 4.21 REBUG ( MAKE SURE THERE IS NO DISK IN YOUR PS3 )
You must login or register to view this content.
INSTALL REBUG TOOLBOX
You must login or register to view this content.
RUN REBUG TOOLBOX AND LOCATE EXPORT TO FLASH ( MAKE SURE USB IS IN SECOND SLOT! )
PRESS EXPORT TO FLASH
PUT USB IN THE COMPUTER!
Now on the computer follow these steps carefully:
NOW ON YOUR CUMPUTER, DOWNLOAD AND INSTALL c2d!
You must login or register to view this content.
EXTRACT THE c2d_openssl.rar TO C:/ AND INSTALL openSSL
MAKE SURE YOU INSTALL IT TO THE C:/ DRIVE
( RENAME THE FOLDER TO "openssl" )
PUT YOUR EI_ROOT_KEY AND YOUR NOR/NAND DUMP IN THE c2d FOLDER
RENAME THE DUMP TO "flashCEX.bin" AND ADD .bin TO EID_ROOT_KEY!
--- YOUR FOLDER SHOULD LOOK LIKE THIS! ------
You must login or register to view this content.
------------------------------------------------
OPEN A COMMAND PROMT IN THE c2d FOLDER BY PRESSING, (CTRL+SHIFT + right click > Open a command window here )
TYPE THIS IN THE COMMAND PROMT!
You must login or register to view this content.
OUTPUT SHOULD LOOK LIKE THIS!
You must login or register to view this content.
TAKE YOUR 2 DUMPS AND RENAME ( flashCEX.bin + flashDEX.bin TO WHAT IS BELLOW
IF YOUR REGULAR DUMP WAS A NORBIN FILE THEN:
------------------------------------------------
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb)
------------------------------------------------
IF YOUR REGULAR DUMP WAS A NANDBIN FILE THEN:
------------------------------------------------
or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
------------------------------------------------
WHATEVER YOUR flashCEX WAS, CHANGE THE DEX DUMP TO THE RIGHT FILE TYPE!
------------------------------------------------
DEX-FLASH.EID0.NORBIN (16mb)
OR
DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place on USB001 (right slot)
------------------------------------------------
PUT THESE FILES IN THE c2d FOLDER ON THE ROOT OF YOUR USB!
PUT USE INTO THE PS3 IN THE FARTHEST SLOT TO THE RIGHT NEAR THE BLURAY DRIVE!
Go back to ps3 follow theses steps now:
OPEN REBUG TOOLBOX, AND BROWSE FOR "REWRITE TARGET ID IN FLASH"
SHOULD LOOK LIKE THIS!: You must login or register to view this content.
A COUPLE OF WARNING BOXES WILL POP UP, CLICK YES ON BOTH!
CONVERT YOUR LVL2 KERNAL TO DEX"
SHOULD LOOK LIKE THIS You must login or register to view this content.
YOU ARE NOW ON DEX ( debug ) 4.21 firmware
NOW TO GET ONLINE WITH 4.50ita!
You must login or register to view this content.
DOWNGRADE 4.21 DEX TO 3.55 DEX!
USE THIS .PUP TO DOWNGRADE!\
You must login or register to view this content.
INSTALL PS3ita 4.50
USE THIS .PUP TO INSTALL 4.50ita!
You must login or register to view this content.
INSTALL PS3ita MANAGER!
You must login or register to view this content.
OPEN PS3ita MANAGER
A.) WHEN OPENED, PRESS START
B.) GO TO NETWORK TOOLS
C.) RESTORE ORIGINAL CONSOLE ID
D.) QUIT PS3ita AND SIGN IN!
Credits:
DEREKTROTTER ( CEX2DEX 4.21 TUTORIAL! )
FinalFantasyXIV ( Making The Downloads For OFW 3.55 and PS3ita 4.50 DEX )
mango_knife ( Making a Video On How To Sign In With PS3ita )
Last edited by
mastakiller13 ; 01-25-2014 at 04:14 PM.
Reason: Clean it up
The following 33 users say thank you to mastakiller13 for this useful post:
-Tavin-, 1austin112, A1narchy.com, ALI ALHILFI, Anthony2262, Ass Burgers, battlebudy, Calebalex1, CraCk_BaBy_13, Dan Dactyl, dazemerson1972, EHRAB BIN LADEN, Frank Ryan, gaming_nation, GangDePlot, Callumeleyy, IG88z, Jewels, king21, Deleted-User0000000012210, lordbongsnipa69, Mango_Knife, MilkShakeModz, Mythusala, PayedMods, Rescue03, Reyz, Sir Zee, smashedya, SOLOTylerMods, Super Spikes2, tunde1992, xxREIGNBOWxx
The following user groaned mastakiller13 for this awful post:
The following user thanked dannyk79 for this useful post:
02-22-2014, 08:38 PM
#67
tunde1992
League Champion
Originally posted by ed900rr
ok I know Im probably getting on peoples nerves but im stuck.the guide is pretty detailed but im stuck on the putting nor flash to folder.i don't wanna screw up.not sure if I downloaded and installed the c2d properly
Use this Tut:You must login or register to view this content.
Its even Simpler
The following user thanked tunde1992 for this useful post:
03-06-2014, 06:52 PM
#69
konpon
Big Sister
Originally posted by mastakiller
CFW USERS ONLY!
FOLLOW THESE STEPS CAREFULLY
I AM NOT RESPONSIBLE OF ANY BRICKS
FOLLOW AT YOUR OWN RISKS!
STEPS:
Start off here:
INSTALL OFW ( OFFICIAL FIRMWARE ) 3.55.
You must login or register to view this content.
JAILBREAK YOUR PS3 WITH KMEAW CFW.
You must login or register to view this content.
Go to the computer, download and install these on the ps3:
INSTALL QA FLAGS! ( TO DOWNGRADE WITHOUT E3 FLASHER )
You must login or register to view this content.
RUN QA FLAGS ( SHOULD GET BLACK SCREEN AND THEN GO BACK TO XMB )
INSTALL EEID ROOT KEY DUMPPER!
You must login or register to view this content.
RUN THE EEID ROOT KEY DUMPPER. ( PS3 SHOULD SHUTDOWN. JUST TURN IT BACK ON )
INSTALL MULTIMAN
You must login or register to view this content.
OPEN MULTIMAN AND USE THE DESKTOP FILEMANAGER
OPEN dev_hdd0 THEN tmp
COPY EEID ROOT KEY TO USB BY THESE STEPS:
---------------------------------------------------------------------
PRESS X ONCE, THEN CIRCLE COPY IT
GO BACK TO dev_USB000 AND PRESS O AND PAST
---------------------------------------------------------------------
Once done with the steps above, download and install these on your CFW:
INSTALL 4.21 REBUG ( MAKE SURE THERE IS NO DISK IN YOUR PS3 )
You must login or register to view this content.
INSTALL REBUG TOOLBOX
You must login or register to view this content.
RUN REBUG TOOLBOX AND LOCATE EXPORT TO FLASH ( MAKE SURE USB IS IN SECOND SLOT! )
PRESS EXPORT TO FLASH
PUT USB IN THE COMPUTER!
Now on the computer follow these steps carefully:
NOW ON YOUR CUMPUTER, DOWNLOAD AND INSTALL c2d!
You must login or register to view this content.
EXTRACT THE c2d_openssl.rar TO C:/ AND INSTALL openSSL
MAKE SURE YOU INSTALL IT TO THE C:/ DRIVE
( RENAME THE FOLDER TO "openssl" )
PUT YOUR EI_ROOT_KEY AND YOUR NOR/NAND DUMP IN THE c2d FOLDER
RENAME THE DUMP TO "flashCEX.bin" AND ADD .bin TO EID_ROOT_KEY!
--- YOUR FOLDER SHOULD LOOK LIKE THIS! ------
You must login or register to view this content.
------------------------------------------------
OPEN A COMMAND PROMT IN THE c2d FOLDER BY PRESSING, (CTRL+SHIFT + right click > Open a command window here )
TYPE THIS IN THE COMMAND PROMT!
You must login or register to view this content.
OUTPUT SHOULD LOOK LIKE THIS!
You must login or register to view this content.
TAKE YOUR 2 DUMPS AND RENAME ( flashCEX.bin + flashDEX.bin TO WHAT IS BELLOW
IF YOUR REGULAR DUMP WAS A NORBIN FILE THEN:
------------------------------------------------
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb)
------------------------------------------------
IF YOUR REGULAR DUMP WAS A NANDBIN FILE THEN:
------------------------------------------------
or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
------------------------------------------------
WHATEVER YOUR flashCEX WAS, CHANGE THE DEX DUMP TO THE RIGHT FILE TYPE!
------------------------------------------------
DEX-FLASH.EID0.NORBIN (16mb)
OR
DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place on USB001 (right slot)
------------------------------------------------
PUT THESE FILES IN THE c2d FOLDER ON THE ROOT OF YOUR USB!
PUT USE INTO THE PS3 IN THE FARTHEST SLOT TO THE RIGHT NEAR THE BLURAY DRIVE!
Go back to ps3 follow theses steps now:
OPEN REBUG TOOLBOX, AND BROWSE FOR "REWRITE TARGET ID IN FLASH"
SHOULD LOOK LIKE THIS!: You must login or register to view this content.
A COUPLE OF WARNING BOXES WILL POP UP, CLICK YES ON BOTH!
CONVERT YOUR LVL2 KERNAL TO DEX"
SHOULD LOOK LIKE THIS You must login or register to view this content.
YOU ARE NOW ON DEX ( debug ) 4.21 firmware
NOW TO GET ONLINE WITH 4.50ita!
You must login or register to view this content.
DOWNGRADE 4.21 DEX TO 3.55 DEX!
USE THIS .PUP TO DOWNGRADE!\
You must login or register to view this content.
INSTALL PS3ita 4.50
USE THIS .PUP TO INSTALL 4.50ita!
You must login or register to view this content.
INSTALL PS3ita MANAGER!
You must login or register to view this content.
OPEN PS3ita MANAGER
A.) WHEN OPENED, PRESS START
B.) GO TO NETWORK TOOLS
C.) RESTORE ORIGINAL CONSOLE ID
D.) QUIT PS3ita AND SIGN IN!
Credits:
DEREKTROTTER ( CEX2DEX 4.21 TUTORIAL! )
FinalFantasyXIV ( Making The Downloads For OFW 3.55 and PS3ita 4.50 DEX )
mango_knife ( Making a Video On How To Sign In With PS3ita )
FOLLOW THESE STEPS CAREFULLY
I AM NOT RESPONSIBLE OF ANY BRICKS
FOLLOW AT YOUR OWN RISKS!
STEPS:
Start off here:
INSTALL OFW ( OFFICIAL FIRMWARE ) 3.55.
You must login or register to view this content.
JAILBREAK YOUR PS3 WITH KMEAW CFW.
You must login or register to view this content.
Go to the computer, download and install these on the ps3:
INSTALL QA FLAGS! ( TO DOWNGRADE WITHOUT E3 FLASHER )
You must login or register to view this content.
RUN QA FLAGS ( SHOULD GET BLACK SCREEN AND THEN GO BACK TO XMB )
INSTALL EEID ROOT KEY DUMPPER!
You must login or register to view this content.
RUN THE EEID ROOT KEY DUMPPER. ( PS3 SHOULD SHUTDOWN. JUST TURN IT BACK ON )
INSTALL MULTIMAN
You must login or register to view this content.
OPEN MULTIMAN AND USE THE DESKTOP FILEMANAGER
OPEN dev_hdd0 THEN tmp
COPY EEID ROOT KEY TO USB BY THESE STEPS:
---------------------------------------------------------------------
PRESS X ONCE, THEN CIRCLE COPY IT
GO BACK TO dev_USB000 AND PRESS O AND PAST
---------------------------------------------------------------------
Once done with the steps above, download and install these on your CFW:
INSTALL 4.21 REBUG ( MAKE SURE THERE IS NO DISK IN YOUR PS3 )
You must login or register to view this content.
INSTALL REBUG TOOLBOX
You must login or register to view this content.
RUN REBUG TOOLBOX AND LOCATE EXPORT TO FLASH ( MAKE SURE USB IS IN SECOND SLOT! )
PRESS EXPORT TO FLASH
PUT USB IN THE COMPUTER!
Now on the computer follow these steps carefully:
NOW ON YOUR CUMPUTER, DOWNLOAD AND INSTALL c2d!
You must login or register to view this content.
EXTRACT THE c2d_openssl.rar TO C:/ AND INSTALL openSSL
MAKE SURE YOU INSTALL IT TO THE C:/ DRIVE
( RENAME THE FOLDER TO "openssl" )
PUT YOUR EI_ROOT_KEY AND YOUR NOR/NAND DUMP IN THE c2d FOLDER
RENAME THE DUMP TO "flashCEX.bin" AND ADD .bin TO EID_ROOT_KEY!
--- YOUR FOLDER SHOULD LOOK LIKE THIS! ------
You must login or register to view this content.
------------------------------------------------
OPEN A COMMAND PROMT IN THE c2d FOLDER BY PRESSING, (CTRL+SHIFT + right click > Open a command window here )
TYPE THIS IN THE COMMAND PROMT!
You must login or register to view this content.
OUTPUT SHOULD LOOK LIKE THIS!
You must login or register to view this content.
TAKE YOUR 2 DUMPS AND RENAME ( flashCEX.bin + flashDEX.bin TO WHAT IS BELLOW
IF YOUR REGULAR DUMP WAS A NORBIN FILE THEN:
------------------------------------------------
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb)
------------------------------------------------
IF YOUR REGULAR DUMP WAS A NANDBIN FILE THEN:
------------------------------------------------
or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
------------------------------------------------
WHATEVER YOUR flashCEX WAS, CHANGE THE DEX DUMP TO THE RIGHT FILE TYPE!
------------------------------------------------
DEX-FLASH.EID0.NORBIN (16mb)
OR
DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place on USB001 (right slot)
------------------------------------------------
PUT THESE FILES IN THE c2d FOLDER ON THE ROOT OF YOUR USB!
PUT USE INTO THE PS3 IN THE FARTHEST SLOT TO THE RIGHT NEAR THE BLURAY DRIVE!
Go back to ps3 follow theses steps now:
OPEN REBUG TOOLBOX, AND BROWSE FOR "REWRITE TARGET ID IN FLASH"
SHOULD LOOK LIKE THIS!: You must login or register to view this content.
A COUPLE OF WARNING BOXES WILL POP UP, CLICK YES ON BOTH!
CONVERT YOUR LVL2 KERNAL TO DEX"
SHOULD LOOK LIKE THIS You must login or register to view this content.
YOU ARE NOW ON DEX ( debug ) 4.21 firmware
NOW TO GET ONLINE WITH 4.50ita!
You must login or register to view this content.
DOWNGRADE 4.21 DEX TO 3.55 DEX!
USE THIS .PUP TO DOWNGRADE!\
You must login or register to view this content.
INSTALL PS3ita 4.50
USE THIS .PUP TO INSTALL 4.50ita!
You must login or register to view this content.
INSTALL PS3ita MANAGER!
You must login or register to view this content.
OPEN PS3ita MANAGER
A.) WHEN OPENED, PRESS START
B.) GO TO NETWORK TOOLS
C.) RESTORE ORIGINAL CONSOLE ID
D.) QUIT PS3ita AND SIGN IN!
Credits:
DEREKTROTTER ( CEX2DEX 4.21 TUTORIAL! )
FinalFantasyXIV ( Making The Downloads For OFW 3.55 and PS3ita 4.50 DEX )
mango_knife ( Making a Video On How To Sign In With PS3ita )
Nice TuT!!!!
but, I have 2 Question.
Please multiMAN link fix. This link, multiMAN(DEX)
and,
back again CEX CFW, possible?
Please tell me, Thanks.
Last edited by
konpon ; 03-07-2014 at 04:00 AM.
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
