Post: [UPDATED] How to Convert to Dex And Install PS3ITA 4.50
Options
11-06-2014, 05:11 AM
#1
tunde1992
League Champion
this is an updated tutorial to get to ps3ita 4.50, original tutorial was a bit outdated. The person who asked my permission to repost the original tut on NGU got banned, so i decided to make a new one.
Requirements
CFW PS3
Removable Disk
CFW PS3
Removable Disk
Before We begin the tutorial, make sure there are no discs or any game mounted on your system. Restart Your PS3 Just to make sure. The tutorial also assumes you know how to install firmwares and package files.
First step
if you're on a 4.46, 4.50 4.60 4.65 E.t.c CFW, install the Rebug 3.55.4 Downgrader Located here
After you have installed that, Install Rebug 4.21
Now install Toggleqa.pkg
https://scmods.com/rebug/pkg/toggle_qa.pkg
It will Blackscreen and Restart your system. Now the converting can actually begin.
STEP 2
Install eid root key dumper.
https://store.brewology.com/get/homebrew.php?id=228&fid=1666
It will also blackscreen and restart your system.
Install Multiman or You can also use FTP
store.brewology.com/get/homebrew.php?id=24&fid=1260
Plug Your USB in, Right slot. Head to File manager in Multiman, Open two tabs. one in dev_hdd0 and one in dev_usb.
Then head to /dev_hdd0/game/FLTZ00010/USRDIR, You will see your Eid_root_key, Copy that eid_root_key to Your usb. Which is DEV_USB
Then head to /dev_hdd0/game/FLTZ00010/USRDIR, You will see your Eid_root_key, Copy that eid_root_key to Your usb. Which is DEV_USB
STEP 3
Next comes the Part Most People have Problem with and a very Critical Part. IF You dont make valid Dump,You could Semi-Brick Your Console, or encounter errors. Just read very carefully. If you have a problem look back here and made sure you did everything EXACTLY like Put.
Before We Start ,First,Go to Control Panel, Then Folder Options, Then switch to the Tab Named view.
IF the Option Hide extensions for Known File type is Checked, Uncheck it. then Apply and press Ok.
IF the Option Hide extensions for Known File type is Checked, Uncheck it. then Apply and press Ok.
You must login or register to view this content.
Now install Rebug toolbox
rebug.me/?wpfb_dl=92
Plug your USB in the right slot. Make sure it's plugged into the RIGHT slot.
Now Locate the Option Export Flash to File.
[img]https://puu.sh/79tw4.jpg [/img]
Click it. And Take Your USB OUT When it is Finished.
Now we are Going to Install C2D+ Openssl.
https://www.mediafire.com/download/3l7b4s3oj3j6u8n/c2d_openssl.rar
Extract the Folder C2D to the Root of C:
You must login or register to view this content.
LISTEN VERY CAREFULLY. EXTRACT The Folder named C2D to the ROOT of C: , don't drag it to your usb and open it, Don't put it on the desktop. IT HAS TO BE IN THE ROOT OF C DRIVE!.
Then install the WIN32Openssl.exe to the Root of C:
You must login or register to view this content.
Make sure it looks EXACTLY like that.Lowercase letters. Try installing it a few times if you have problems.
Now Plug Your USB into Your Computer and Put Both Your eid_root_key and Your Flash into THE C2D Folder.
RENAME EID_ROOT_KEY TO eid_root_key.bin
RENAME Your flash to flashCEX.bin
RENAME Your flash to flashCEX.bin
It Should now Look Like This
You must login or register to view this content.
Now if You PRESS CTRL PLUS SHIFT then RIGHT CLICK on an EMPTY Space in the C2D folder You should see This Option for CMD
You must login or register to view this content.
Select open Command window here and You should SEE this
You must login or register to view this content.
Now type this in exactly like i have it. make sure those spaces are also included.
c2d.exe eid_root_key.bin flashCEX.bin flashDEX.bin 82
You must login or register to view this content.
Now Press enter and You Should Get this.
You must login or register to view this content.
Now if You look in the C2D Folder . You have a new File Called
flashDEX.bin
flashDEX.bin
You must login or register to view this content.
They MUST be the Same Size.
Now Here comes an Important Part
You can check if you have a NOR OR NAND HERE
IF You have a NANDBIN PS3
Rename the flashCEX.bin to
CEX-FLASH.EID0.NANDBIN
Rename the flashDEX.bin to
DEX-FLASH.EID0.NANDBIN
IF YOU HAVE A NORBIN PS3
Rename the flashCEX.bin to
CEX-FLASH.EID0.NORBIN
Rename the flashDEX.bin to
DEX-FLASH.EID0.NORBIN
NORBIN
You must login or register to view this content.
NANDBIN
You must login or register to view this content.
Now Put both These two in a Flash Drive.
Plug it into the PS3's RIGHT Slot . RIGHT SLOT.
Go to Rebug Toolbox
.Locate that option and Click it. You'll get a few warning boxes , Press yes.
You must login or register to view this content.
If It Forces You to Restart, Do so. The dump should be Valid and You will Restart With no Problem.
Now locate This Option in Rebug Toolbox.
You must login or register to view this content.
Choose it.
Now if You go to System Settings. IT Will Say Rebug 4.21 DEX
Target Type-DEX
LV2 Kernel Type-DEX
LV2 Kernel Type-DEX
STEP 4
i recommend saving the flash and eid_root_key on your computer.
Install PS3ITA 4.50
https://mega.co.nz/#!MJ4EhTRJ!f5inZHPl-arigHTiElPH53augEQyA5DnrT4CDHbDUNU
Now Your on PS3ITA 4.50. Congratulations! 
.
.Before You can Sign in.
go to Debug Settings.
Make sure These Settings are Set.
Release Check Mode-Development Mode
Boot Mode-System Software Mode
Network Settings for Debug-Single Settings.
go to Debug Settings.
Make sure These Settings are Set.
Release Check Mode-Development Mode
Boot Mode-System Software Mode
Network Settings for Debug-Single Settings.
Also link to 4.60 spoofer and tutorial Here :
Now Install PS3ITA 4.50 manager
https://www.ps3ita.it/download/homebrew/PS3ITA_Manager_v1.51.pkg
Open it. Press Start , Go to Network Tools then Restore Default ID[EID5}
You will have to do this every time you restart your console, However you can set the PS3's CID to automatically boot at startup Either by switching to ps3ita 4.55 and using Cfw setup, or ccapi 2.60's SET CID app.
Downloads
PSID PATCH 4.50 DEX
https://www.mediafire.com/download/820jh12opibiu0i/PSIDPATCH16+CFW+4.50+FIXED+BY+MEGAGO.pkg
Multiman 4.60 DEX
https://store.brewology.com/get/homebrew.php?id=24&fid=1500
CFW SETUP V4
https://www.ps3ita.it/download/homebrew/cfw_setup_v4.pkg
Tutorials for setting up TMAPI on DEX
You must login or register to view this content.
You must login or register to view this content.
You must login or register to view this content.
THANK YOU ALL!
Last edited by
tunde1992 ; 11-06-2014 at 05:35 AM.
The following 11 users say thank you to tunde1992 for this useful post:
11-07-2014, 02:14 PM
#11
DebuggingCoder
Can’t trickshot me!
11-07-2014, 02:16 PM
#12
l3allermann82
Guest
best tool to convert cex to dex
11-07-2014, 02:17 PM
#13
DebuggingCoder
Can’t trickshot me!
11-07-2014, 02:17 PM
#14
l3allermann82
Guest
11-07-2014, 02:18 PM
#15
DebuggingCoder
Can’t trickshot me!
11-07-2014, 02:24 PM
#16
l3allermann82
Guest
VirusScan: You must login or register to view this content.
Download: You must login or register to view this content.
How use:In the first u put your dump in in the secon u put eid root key in.u dont rename when u flash.put the eid root key and the dump on deskop open tool cex2dex.tool will not found the eid root key and the dump u need put the first numbers in tool like this You must login or register to view this content. after u got all 2 files in tool press button cex to dex than named the file to DEX-FLASH.EID0 tool automatic named this to .bin u need rename to NORBIN(16mb flash) or NANDBIN(256mb flash).U are done than
Sorry for my english.
Download: You must login or register to view this content.
How use:In the first u put your dump in in the secon u put eid root key in.u dont rename when u flash.put the eid root key and the dump on deskop open tool cex2dex.tool will not found the eid root key and the dump u need put the first numbers in tool like this You must login or register to view this content. after u got all 2 files in tool press button cex to dex than named the file to DEX-FLASH.EID0 tool automatic named this to .bin u need rename to NORBIN(16mb flash) or NANDBIN(256mb flash).U are done than
Sorry for my english.
11-07-2014, 02:27 PM
#17
DebuggingCoder
Can’t trickshot me!
Originally posted by l3allermann82
VirusScan: You must login or register to view this content.
Download: You must login or register to view this content.
How use:In the first u put your dump in in the secon u put eid root key in.u dont rename when u flash.put the eid root key and the dump on deskop open tool cex2dex.tool will not found the eid root key and the dump u need put the first numbers in tool like this You must login or register to view this content. after u got all 2 files in tool press button cex to dex than named the file to DEX-FLASH.EID0 tool automatic named this to .bin u need rename to NORBIN(16mb flash) or NANDBIN(256mb flash).U are done than
Sorry for my english.
Download: You must login or register to view this content.
How use:In the first u put your dump in in the secon u put eid root key in.u dont rename when u flash.put the eid root key and the dump on deskop open tool cex2dex.tool will not found the eid root key and the dump u need put the first numbers in tool like this You must login or register to view this content. after u got all 2 files in tool press button cex to dex than named the file to DEX-FLASH.EID0 tool automatic named this to .bin u need rename to NORBIN(16mb flash) or NANDBIN(256mb flash).U are done than
Sorry for my english.
Thanks :p
The following user thanked DebuggingCoder for this useful post:
11-07-2014, 02:31 PM
#18
l3allermann82
Guest
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
