Tutorial PS3 Tutorial/Guide/Downgrade Files - Page 2 - NextGenUpdate
THREAD: PS3 Tutorial/Guide/Downgrade Files
  1. 04-29-2015, 12:26 PM
    #1
    Jon Snow's Avatar
    Jon Snow
    Di DonDadda
    Jon Snow's Avatar
    Jon Snow
    Di DonDadda
    2,826
    Posts
    32,982
    Reputation
    Mar 2013
    NextGenUpdate
    I notice that there is a not a lot tutorials on how to do a downgrade with a E3 flasher and there none of the latest files. So i decided to share my dropbox folder with u guys and leave some videos and other helpful guides.

    [Only registered and activated users can see links. ] to view this content.


    Downgradable PS3 Chart
    Spoiler:

    NOTE There is more than one way to check if your ps3 if downgradable.
    You must register to view this content.

    You must register to view this content.

    You must register to view this content.




    How to find your model number
    You must register to view this content.


    FAQs
    Spoiler:

    • Are NAND downgradable? Yes
    • Can i use a E3 flasher to downgrade a NAND? No
    • Is it possible to jailbreak my ps3 without a e3 flasher? only if its already on 3.55 or lower FW



    My Tools
    Spoiler:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]



    E3 Flasher Errors

    Spoiler:

    Code:
    0 1 0 0 0 0 0 0 Failed to initialize TF card SD card not seated properly 
    0 1 0 0 0 1 0 0 Failed to read files in TF card SD card not seated properly 
    0 1 0 0 1 0 0 0 Failed to open TF card SD card not seated properly 
    0 1 0 0 1 1 0 0 Failed to write files to TF card SD card not seated properly 
    1 0 0 0 0 1 0 0 Failed to initialize NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 0 1 Failed to read NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 1 0 Failed to erase NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 1 1 Failed to write NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 0 1 Failed to read PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 1 0 Failed to erase PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 1 1 Failed to write PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 1 0 0 0 0 0 0 Wrong settings of switches Check toggle switch - wrong setting 
    1 1 0 0 0 0 1 0 PS3 is operating NOR, E3 Flasher cannot operate at the same time Check toggle switch -wrong sitting 
    1 1 0 0 0 1 0 0 Not the right PS3 for this backup Already used e3flasher on 1 console 
    1 1 0 0 1 0 0 0 Wrong PS3 version, not supported at present Metldr.2 model undowngradable 
    1 1 0 0 1 1 0 0 Wrong function settings Check toggle switch - wrong setting


    Video Tutorials
    Spoiler:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    These Videos are in my dropbox so u can either stream them are download them

    This one is for if know all the basic stuff
    Spoiler:




    these vidoes was not created by me, So Shoutout to ModzLink and blufox20


    Tutorial for 4.75
    Spoiler:

    The Flash Tool Is 4.50 But Works With 4.75 (TESTED)
    The Nor Inspector Is To Check If Your Dump Is 100% Good To Go

    4.50 Flash Tool = [Only registered and activated users can see links. ]

    NOR Inspector = [Only registered and activated users can see links. ]

    E3 Flasher Update (MultiConsoles) = [Only registered and activated users can see links. ]

    If You Need A Good TuT To Follow, i Recommend This One.



    This tutorial is by Platisfied all credits

    [Only registered and activated users can see links. ]


    News:
    Quoted Message PS3 Tutorial/Guide/Downgrade Files
    We will release a new version E3 FLASHER specially for NAND FLASH console in few weeks, it help you downgrade and dual boot easier with NAND FLASH CLIP .
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ] to view this content.

    Credits:
    Bobby Downgrades
    ModzLink
    E3 Team
    Blufox
    Swizzy
    Last edited by Jon Snow; 03-08-2017 at 09:59 AM. Reason: Added 4.81 Patcher

  2. The Following 25 Users Say Thank You to Jon Snow For This Useful Post:

    , , , , , , , , , , , , , , , , , , , , , , , ,

  3. 04-30-2015, 03:55 PM
    #11
    Nex_Letum's Avatar
    Nex_Letum
    Little One
    Nex_Letum's Avatar
    Nex_Letum
    Little One
    266
    Posts
    233
    Reputation
    Aug 2014
    NextGenUpdate
    Sponsored Links

    Originally Posted by JATOCH View Post
    Nice tutorial , is it always needed to add new thermal paste?
    probably not necessarily needed per say, but it is recommended to change while you are in there. reason? the crap that Sony uses is minimal and brakes down pretty easily and after a short time, is no longer functioning. Its actually the reason for a lot of PS3 overheating issues. I would always recommend that while you are in there, upgrade the paste to a high quality paste. Something along the lines of Artic Silver 5. doing this does worlds for prolonging the life of the PS3
  4. Sponsored Links
  5. 05-05-2015, 03:13 PM
    #12
    13
    Posts
    50
    Reputation
    Mar 2015
    NextGenUpdate
    so correct me if i think this is too easy, first you buy a e3 flasher,the screwdrivers to open ps3. then you open up the ps3 till you get to the motherboard, then once there you attatch the e3 clip on it, then u hook other side to the e3 reader device, then go on pc and update the e3 flasher and then you go from there, is it easy as it sounds? and can i do this to a ps3 on 4.70ofw downgrade to 3.55ofw
  6. 05-13-2015, 08:58 PM
    #13
    Nex_Letum's Avatar
    Nex_Letum
    Little One
    Nex_Letum's Avatar
    Nex_Letum
    Little One
    266
    Posts
    233
    Reputation
    Aug 2014
    NextGenUpdate
    Originally Posted by Twon_turboV8 View Post
    so correct me if i think this is too easy, first you buy a e3 flasher,the screwdrivers to open ps3. then you open up the ps3 till you get to the motherboard, then once there you attatch the e3 clip on it, then u hook other side to the e3 reader device, then go on pc and update the e3 flasher and then you go from there, is it easy as it sounds? and can i do this to a ps3 on 4.70ofw downgrade to 3.55ofw
    there are plenty of good tuts out there(I would recommend watching a few all the way through before attempting to do the downgrade). It is pretty simple if you can follow directions. Hardest part honestly is separating the motherboard from tray. There are many recommendations to do this ranging from a hair dryer, to using a heat gun. I would make the personal recommendations to NEVER use a heat gun as a lot of ppl do on the board of a ps3 or any other sensitive electronic equipment period. The reason for this is simple. Being an auto tech by trade, I know how hot heat guns can get. This is entirely too much heat to be used on electronics simply because it can melt the existing solder on the board...which is basically what causes YLOD and/or RLOD. So yeah, watch over a few tuts all the way through, and if you feel confident enough to try it, then by all means. I definetly would NOT however recommend doing it if it is your only PS3...as if you mess up, there is a chance you will brick the console ie: making it non useable except to rip a console id from and basically use as a door stop at that point. I waited until I had three ps3's before I downgraded one of them. One of the three I left OFW, the second I jailbroke and set up for CEX. and the third one which I recently picked up was jailbroken and converted to DEX.... But that's all besides the point. Yeah, downgrade is pretty easy if you can follow instructions, just watch some tuts and see if you are comfortable attempting it.
  7. 08-25-2015, 06:31 AM
    #14
    Kas's Avatar
    Kas
    Guest
    Kas's Avatar
    Kas
    Guest
    n/a
    Posts
    n/a
    Reputation
    Once upon a time...
    NextGenUpdate
    Originally Posted by ResistTheStar View Post
    I notice that there is a not a lot tutorials on how to do a downgrade with a E3 flasher and there none of the latest files.
    So i decided to share my dropbox folder with u guys and leave some videos and other helpful guides.


    You must register to view this content.

    [Only registered and activated users can see links. ] to view this content.


    Downgradable PS3 Chart
    Spoiler:

    NOTE There is more than one way to check if your ps3 if downgradable.
    You must register to view this content.

    You must register to view this content.

    You must register to view this content.




    How to find your model number
    You must register to view this content.


    FAQs
    Spoiler:

    • Are NAND downgradable? Yes
    • Can i use a E3 flasher to downgrade a NAND? No
    • Is it possible to jailbreak my ps3 without a e3 flasher? only if its already on 3.55 or lower FW



    My Tools
    Spoiler:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]



    E3 Flasher Errors

    Spoiler:

    Code:
    0 1 0 0 0 0 0 0 Failed to initialize TF card SD card not seated properly 
    0 1 0 0 0 1 0 0 Failed to read files in TF card SD card not seated properly 
    0 1 0 0 1 0 0 0 Failed to open TF card SD card not seated properly 
    0 1 0 0 1 1 0 0 Failed to write files to TF card SD card not seated properly 
    1 0 0 0 0 1 0 0 Failed to initialize NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 0 1 Failed to read NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 1 0 Failed to erase NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 1 1 Failed to write NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 0 1 Failed to read PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 1 0 Failed to erase PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 1 1 Failed to write PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 1 0 0 0 0 0 0 Wrong settings of switches Check toggle switch - wrong setting 
    1 1 0 0 0 0 1 0 PS3 is operating NOR, E3 Flasher cannot operate at the same time Check toggle switch -wrong sitting 
    1 1 0 0 0 1 0 0 Not the right PS3 for this backup Already used e3flasher on 1 console 
    1 1 0 0 1 0 0 0 Wrong PS3 version, not supported at present Metldr.2 model undowngradable 
    1 1 0 0 1 1 0 0 Wrong function settings Check toggle switch - wrong setting


    Video Tutorials
    Spoiler:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    These Videos are in my dropbox so u can either stream them are download them

    This one is for if know all the basic stuff
    Spoiler:




    these vidoes was not created by me, So Shoutout to ModzLink and blufox20


    Tutorial for 4.75
    Spoiler:

    The Flash Tool Is 4.50 But Works With 4.75 (TESTED)
    The Nor Inspector Is To Check If Your Dump Is 100% Good To Go

    4.50 Flash Tool = [Only registered and activated users can see links. ]

    NOR Inspector = [Only registered and activated users can see links. ]

    E3 Flasher Update (MultiConsoles) = [Only registered and activated users can see links. ]

    If You Need A Good TuT To Follow, i Recommend This One.



    This tutorial is by Platisfied all credits

    [Only registered and activated users can see links. ]
    Looks great, man nice!
  8. 08-25-2015, 07:16 AM
    #15
    Mr503's Avatar
    Mr503
    Brute
    Mr503's Avatar
    Mr503
    Brute
    207
    Posts
    340
    Reputation
    Nov 2013
    NextGenUpdate
    Originally Posted by ResistTheStar View Post
    I notice that there is a not a lot tutorials on how to do a downgrade with a E3 flasher and there none of the latest files.
    So i decided to share my dropbox folder with u guys and leave some videos and other helpful guides.


    You must register to view this content.

    [Only registered and activated users can see links. ] to view this content.


    Downgradable PS3 Chart
    Spoiler:

    NOTE There is more than one way to check if your ps3 if downgradable.
    You must register to view this content.

    You must register to view this content.

    You must register to view this content.




    How to find your model number
    You must register to view this content.


    FAQs
    Spoiler:

    • Are NAND downgradable? Yes
    • Can i use a E3 flasher to downgrade a NAND? No
    • Is it possible to jailbreak my ps3 without a e3 flasher? only if its already on 3.55 or lower FW



    My Tools
    Spoiler:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]



    E3 Flasher Errors

    Spoiler:

    Code:
    0 1 0 0 0 0 0 0 Failed to initialize TF card SD card not seated properly 
    0 1 0 0 0 1 0 0 Failed to read files in TF card SD card not seated properly 
    0 1 0 0 1 0 0 0 Failed to open TF card SD card not seated properly 
    0 1 0 0 1 1 0 0 Failed to write files to TF card SD card not seated properly 
    1 0 0 0 0 1 0 0 Failed to initialize NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 0 1 Failed to read NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 1 0 Failed to erase NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 0 1 1 1 Failed to write NOR in E3 Check pads / clip at E3 board check may not be properly seated 
    1 0 0 0 1 1 0 0 Failed to initialize PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 0 1 Failed to read PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 1 0 Failed to erase PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 0 0 0 1 1 1 1 Failed to write PS3 BIOS Check pads / clip at PS3 board check may not be properly seated 
    1 1 0 0 0 0 0 0 Wrong settings of switches Check toggle switch - wrong setting 
    1 1 0 0 0 0 1 0 PS3 is operating NOR, E3 Flasher cannot operate at the same time Check toggle switch -wrong sitting 
    1 1 0 0 0 1 0 0 Not the right PS3 for this backup Already used e3flasher on 1 console 
    1 1 0 0 1 0 0 0 Wrong PS3 version, not supported at present Metldr.2 model undowngradable 
    1 1 0 0 1 1 0 0 Wrong function settings Check toggle switch - wrong setting


    Video Tutorials
    Spoiler:

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    These Videos are in my dropbox so u can either stream them are download them

    This one is for if know all the basic stuff
    Spoiler:




    these vidoes was not created by me, So Shoutout to ModzLink and blufox20


    Tutorial for 4.75
    Spoiler:

    The Flash Tool Is 4.50 But Works With 4.75 (TESTED)
    The Nor Inspector Is To Check If Your Dump Is 100% Good To Go

    4.50 Flash Tool = [Only registered and activated users can see links. ]

    NOR Inspector = [Only registered and activated users can see links. ]

    E3 Flasher Update (MultiConsoles) = [Only registered and activated users can see links. ]

    If You Need A Good TuT To Follow, i Recommend This One.



    This tutorial is by Platisfied all credits

    [Only registered and activated users can see links. ]
    Hey I have a question. What are those 4.46 and 4.70 patchers and 4.60 downgrade files I see in the pic?
    Cuz I thought it didn't matter what firmware the PS3 was on. That all that matter was that the PS3 model was included in the list of models the e3 flasher worked on.
  9. 08-25-2015, 12:27 PM
    #16
    Jon Snow's Avatar
    Jon Snow
    Di DonDadda
    Jon Snow's Avatar
    Jon Snow
    Di DonDadda
    2,826
    Posts
    32,982
    Reputation
    Mar 2013
    NextGenUpdate
    Originally Posted by Mr503 View Post
    Hey I have a question. What are those 4.46 and 4.70 patchers and 4.60 downgrade files I see in the pic?
    Cuz I thought it didn't matter what firmware the PS3 was on. That all that matter was that the PS3 model was included in the list of models the e3 flasher worked on.
    ok so example, if you extract the 4.50 dump, you have to use the 4.50 patcher to patch the bkpp dump, each firmware have a different patcher, some times the older patcher will work on the new dump but its risky i would not advise u do that
  10. 08-25-2015, 12:28 PM
    #17
    Jon Snow's Avatar
    Jon Snow
    Di DonDadda
    Jon Snow's Avatar
    Jon Snow
    Di DonDadda
    2,826
    Posts
    32,982
    Reputation
    Mar 2013
    NextGenUpdate
    Originally Posted by Kas View Post
    Looks great, man nice!
    thanks bro
  11. 08-26-2015, 04:16 PM
    #18
    Mr503's Avatar
    Mr503
    Brute
    Mr503's Avatar
    Mr503
    Brute
    207
    Posts
    340
    Reputation
    Nov 2013
    NextGenUpdate
    Guys so I'm trying to downgrade my PS3 with the e3 and for some reason when I try to get a dump I get the 10001100 error. I even tried the styrofoam trick to apply extra pressure but no luck :(


    I have a fat 40gig PS3 Model CECHH
    Any advise?
  12. 08-26-2015, 07:04 PM
    #19
    1,670
    Posts
    3,421
    Reputation
    Nov 2014
    NextGenUpdate
    Originally Posted by Mr503 View Post
    Guys so I'm trying to downgrade my PS3 with the e3 and for some reason when I try to get a dump I get the 10001100 error. I even tried the styrofoam trick to apply extra pressure but no luck :(


    I have a fat 40gig PS3 Model CECHH
    Any advise?
    Check the error code on e3 flasher wiki I'm sure it's memory card not inserted correctly or lose the error code 10001100
  13. 08-27-2015, 08:04 AM
    #20
    Mr503's Avatar
    Mr503
    Brute
    Mr503's Avatar
    Mr503
    Brute
    207
    Posts
    340
    Reputation
    Nov 2013
    NextGenUpdate
    Originally Posted by Moreuseinatool View Post
    Check the error code on e3 flasher wiki I'm sure it's memory card not inserted correctly or lose the error code 10001100
    I had already done that. It was about the clip not being read properly or something. I was using the styrofoam method so I really didn't know why it wasn't working because that method works for like everyone else lol

    In the end I ended up using coins as a last resort instead of styrofoam and I guess that actually gave it more pressure cuz it finally worked

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •