Tutorial: PS3 YLoD Oven Fix Tutorial: - Page 39 - NextGenUpdate
Page 39 of 39 First 29 37 38 39
THREAD: PS3 YLoD Oven Fix Tutorial:
  1. 06-26-2011, 02:52 PM
    #1
    2RAW4THESTREET's Avatar
    2RAW4THESTREET
    The Best who ever lived
    2RAW4THESTREET's Avatar
    2RAW4THESTREET
    The Best who ever lived
    1,468
    Posts
    6,012
    Reputation
    Jan 2011
    NextGenUpdate
    I didn't see it on here so I'm going to post how to fix your PS3's Ylod with an
    oven instead of the Heat gun method.

    NOTE(s): Don't do this if your ps3 is still under warranty. Just send it to Sony. This is for those who; 1.) Don't have or want to spend $150 to get it fixed by Sony, 2.) Don't have the proper tools for the heat gun method, or 3.) Tried the heat gun method and it failed.

    Also this tut has been confirmed to fix PS3s that have had the Green Light of Death or GLoD by martin420.

    Also, this is a tutorial for PS3 Phats that have fallen victim to the YLoD. I'm not
    familiar with how the inside of PS3 slim is, bit I'm sure if you google a tutorial on how to disassemble ps3 slim, the ovem method would be the same.

    First off you'll need to buy a tube of thermal paste before you begin. I got mine at Radio Shack for $10. Artic Silver 5 is recommended. Looks like this: [Only registered and activated users can see links. ]

    Now: First, you'll need to dissassemble your PS3 completely. For that, here is a detailed picture tutorial(I take no credit for the tutorial): [Only registered and activated users can see links. ]

    2.) Once you have disassembled your PS3 completely, look for the GPU and CPU on the motherboard. They are the two biggest squares with the thermal paste on them. Once you do that, get some Q-Tips(or anything lent free) and apply a small dab of rubbing alcohol on it and remove the left over thermal paste. Make sure none is on the motherboard as well.

    3.) Once that is done, Remove the PS3's internal battery(stores the date, time, etc.). Look on the motherboard for a little silver battery(Like this: [Only registered and activated users can see links. ]) as well as the little sticky black things on the motherboard. Failure to do so will result in them melting to the motherboard and the battery exploading(I learned the hard way as I forgot to do so. My battery exploaded so I had to get a new one).

    4.) Once the motherboard is good to go, get a deep aluminum foil baking pan. Then lye the motherboard so that its sitting on the pans edge's(NOT in the pan itself). This allows the heat from the oven to heat and reflow both sides of the motherboard.

    5.) Preheat your oven to 425 degrees F. Pretty simple.

    6.) Once your oven is at 425 degrees F, stick the motherboard in the oven and set the timer(or time yourself if you lack a timer) for 10 minutes.

    7.) Once the 10 minutes is up, remove the motherboard from the oven and let it cool for 2-3 minutes.

    8.) Once it has cooled, you can apply the new thermal paste. To do this, you'll need an old credit card(or any plastic card of that sort). Now add a thin strip of thermal paste to the GPU and CPU; Here's a pic of how much you should apply: http://sometimesgeeky.com/wp-content...paste-chip.jpg

    9. Now take the card and smooth the thermal paste out on both chips. Make
    sure while doing that, none gets on the motherboard. If it does, wipe it off.

    10.) Once you have applied the fresh thermal paste, you can begin to re-assemble your PS3. Just follow the disassemble tutorial backwards to re-assemble your system.

    11.) Enjoy playing your PS3 again.

    NOTE: The YLOD fix is not permanent. It lasts 3-5 months before you must apply more paste again. I fixed my ps3 in January(2011) and did not have to re apply thermal paste until last July(2011). The 3-5 months also gives you time to just save up for a new PS3. =D

    Please don't forget to thank if you found this
    tut useful and easy to understand. And if you tried it and were successful, post here so I can add your name to the list. 


    1. 2raw4thestreet (me lol)
    2. mrBear
    3. JohnHiggins
    4. ChristianaRawr
    5. God_Of_War
    6. moeinyoho
    7. Turbo6001_McK
    8. ii_QuickScope_x
    9. chaiiios
    10. Thibaut87
    11. unkown231
    12. martin420(had GLoD; but this tut worked for him)
    13. StEaLtHRvG
    14. the_noob
    15. wave_gun_155
    16. Sniper_Sean_88
    17. Mikeyy
    18. Mrtrolololo
    19. p311
    20. CaptinModz
    21. Xx_BrO-K_xX
    22. eclipse
    23. mrocod
    24. 1MTZ_956
    25. zElitemodzHD
    26. XxEriCxX
    27. biker4033
    28. Gatemaster
    29. Bradley John
    30. grassy01
    31. christoff_25
    32. ~ Dragan ~
    33. killa_ninja58
    34. alselek
    35. Quinster08
    Last edited by 2RAW4THESTREET; 07-26-2015 at 10:16 PM.

  2. The Following 58 Users Say Thank You to 2RAW4THESTREET For This Useful Post:

    , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

  3. 09-07-2016, 11:20 AM
    22
    Posts
    10
    Reputation
    Mar 2016
    NextGenUpdate
    Sponsored Links

    Thanks reallh needed this

    ]
    Last edited by saintkiller; 09-07-2016 at 11:21 AM. Reason: to big for this comment

  4. Sponsored Links
  5. 10-12-2016, 03:31 PM
    Jaspered's Avatar
    Jaspered
    Haxor!
    Jaspered's Avatar
    Jaspered
    Haxor!
    25
    Posts
    30
    Reputation
    Oct 2016
    NextGenUpdate
    thank you this helped very much
  6. 12-12-2016, 04:06 PM
    ItsYaBoyGeorge's Avatar
    ItsYaBoyGeorge
    Save Point
    ItsYaBoyGeorge's Avatar
    ItsYaBoyGeorge
    Save Point
    5
    Posts
    10
    Reputation
    Oct 2016
    NextGenUpdate
    Nice Trick
  7. 12-19-2016, 02:56 PM
    754
    Posts
    1,781
    Reputation
    Jan 2011
    NextGenUpdate
    ive used only heat guns on 4 ps3's not one failed make sure apply right amount of heat thats all..i dont trust the oven could warp your board or fry some thing else on it..
  8. 01-01-2017, 07:08 AM
    20
    Posts
    10
    Reputation
    Jun 2015
    NextGenUpdate
    i wanted to say thank you for helping me after many years i mange to fix my ylod a couple days ago now im back on my jb
  9. 01-13-2017, 04:34 PM
    CGQuinn's Avatar
    CGQuinn
    Bounty hunter
    CGQuinn's Avatar
    CGQuinn
    Bounty hunter
    168
    Posts
    -53
    Reputation
    Dec 2016
    NextGenUpdate
    what is Ylod
  10. 02-17-2017, 04:00 PM
    rangehe32's Avatar
    rangehe32
    Do a barrel roll!
    rangehe32's Avatar
    rangehe32
    Do a barrel roll!
    101
    Posts
    50
    Reputation
    Feb 2011
    NextGenUpdate
    helped alot
  11. 04-02-2017, 04:34 AM
    PassiveBypass's Avatar
    PassiveBypass
    Do a barrel roll!
    PassiveBypass's Avatar
    PassiveBypass
    Do a barrel roll!
    102
    Posts
    499
    Reputation
    Oct 2015
    NextGenUpdate
    the title sounds so dumb but gg lol
  12. 09-02-2017, 06:55 PM
    Modderx-'s Avatar
    Modderx-
    Keeper
    Modderx-'s Avatar
    Modderx-
    Keeper
    20
    Posts
    10
    Reputation
    Jul 2013
    NextGenUpdate
    thanks for this
Page 39 of 39 First 29 37 38 39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •