Results 1 to 9 of 9

Thread: How to Back-up XBOX 360 Games


  1. Outsider's Avatar

    Outsider eXo Clan Leader

    Join Date May 2008

    Posts 2,856

    Membership Chief Executive Officer

    Reputation: 65847

    06-17-2012 11:48 PM #1 How to Back-up XBOX 360 Games


    This guide will show to backup Xbox 360 games with Xbox Backup Creator and ImgBurn.

    What's Required:

    1. Original Xbox 360 Game

    2. DVD-ROM drive capable of reading Xbox 360 games: There are a couple drives that are capable of this. By far the most common way is to purchase a Samsung SH-D162C and flash it with Kreon's firmware. In America these drives are no longer in production, the best place to find one is on eBay. Expect to pay about $60 for one, well worth it for backing up your original Xbox 360 games. Most times the drives will come preflashed with Kreon's firmware, if not, download Kreon's firmware off Xbins and flash it with an app called sfdnwin. All the necessary tools for flashing the SH-D162C come with the Kreon firmware download on Xbins. The other methods involve dissembling the Xbox 360 console, hooking the 360 DVD-ROM drive up to your PC via a SATA cable/connectivity kit, and using it to read the 360 games. Using the Samsung SH-D162C is much easier. The SH-D162C is for reading Xbox 360 games only, a Dual Layer burner is required to burn 360 games.

    3. Dual Layer DVD Burner: Any Dual Layer burner will work, one capable of booktyping is recommended. Most all newer DVD burners are capable of booktying/bitsetting DVD+RL to DVD-ROM.

    4. Modified Xbox 360 Console: Your Xbox 360 must be flashed with the hacked Xtreme or iXtreme firmware in order to boot backups. Flashing the 360 involves dissembling it, hooking the DVD-ROM up to your PC via SATA cable/Connectivity kit, and flashing it through dos. The flash method is different depending on whether you have a Samsung, Hitachi, or BenQ DVD-ROM drive. There is currently Xtreme firmware available for all 360 DVD-ROM drives in circulation. For more info on flashing the Xbox 360, check here: (Will post tutorial guide later)

    5. Xbox Backup Creator: http://dwl.xbox-scene.com/xbox360pc/...v2.5.0.230.zip

    Mirror: RapidShare: 1-Click Webhosting

    6. ImgBurn: The Official ImgBurn Website

    7. Blank DVD+R DL: Verbatim's are highly recommended, their quality is unmatched by other Dual Layer media. DVD-R DL discs will not work, a blank DVD+R DL is required.

    Before Starting

    Open Xbox Backup Creator. Click the options tab. Set your options as follows:



    Tweak as necessary according to your setup/preferences. It's not necessary to tweak any settings to get a working Xbox 360 backup. Mainly I recommend setting the block retry and sector retries to 20, in the event the disc is scratched or dirty, Xbox Backup Creator will attempt to reread the corrupted block/sector a maximum of 20 tries before giving the user the option to fill it with zeros or attempt a manual retry. I suggest selecting the manual retry option, filling with zeros is never a good idea. If after several manual retries XBC is stuck at the same point, it's probably best to cut your losses and abort the rip process.

    Splitvid

    Splitvid is a new option used for ripping isos found in Xbox Backup Creator 2.6 and later. Basically, the way that XBC rips backups currently, it only rips about half of the actual video partition of the disc, resulting in the standard iso size of 7.05GB's. The splitvid option rips the entire video partition, resulting in an iso size of 7.29GB's. Splitvid isos cause numerous compatibility issues on Xtreme firmwares, and backups created with splitvid enabled may not boot at all on any 360 flashed with Xtreme firmware. So if you are using any of the Xtreme firmware, make sure splitvid is turned off in Xbox Backup Creator before ripping. With iXtreme firmware it doesn't matter if splitvid is enabled. With Xtreme firmware, be sure to disable it! You can disable splitvid in the options in Xbox Backup Creator 2.6 and later, here is a picture showing how to disable the splitvid option.



    GUIDE

    1. Insert your original Xbox 360 game into the Samsung SH-D162C.

    2. Open Xbox Backup Creator.



    3. Click the drive tools tab. Click Unlock drive.



    4. Click the read tab.



    5. Make sure complete backup is checked, and click start.



    6. This menu will appear. Select a name and destination for your iso. I recommend saving the iso image to the desktop for easy access. Click save when you are done.



    7. The game will begin to rip. A normal rip will take 10-12 minutes.



    8. It's finished! This message will pop up. Click okay. Once completed a dvd file and iso file will be created. The dvd file is what you want to load into ImgBurn.



    9. Close Xbox Backup Creator.

    10. Insert a blank DVD+R DL disc into your Dual Layer DVD Burner.

    11. Open ImgBurn.

    12. Select Mode-->Write. Select your Dual Layer Burner in the Destination box, I select the Liteon 16W1P here.



    13. Click the browse for file button at the top left of ImgBurn, highlighted with a square in the following picture. As an alternative to clicking the browse button, you can drag and drop the dvd file into ImgBurn, which is why I suggested saving the iso and dvd file to the desktop earlier during the rip process.



    14. The following menu will appear. Browse to your dvd file and doubleclick it or single click it and click open.



    15. The dvd file will now be loaded into ImgBurn. The LB next to the sectors portion of ImgBurn stands for Layer Break. Basically this is where the end of the first layer stops and the beginning of the second layer begins on a Dual Layer disc. The LB should always read 1913760 for Xbox 360 games. Set the write speed to 2x or 4x. Click write at the bottom of the program.



    16. The game will then be burned to disc. The burn process will take about 45 minutes at 2x, 25 minutes at 4x.



    17. It's done! Click okay.



    Booktying with ImgBurn

    Bootyping means to change the way a DVD-ROM drive reads a DVD+R or DVD+R DL disc. When you booktype a disc from DVD+R or DVD+R DL to DVD-ROM, it will read the burned disc as a DVD-ROM, the same booktype as a pressed or store-bought DVD. DVD-ROM is the most universally compatible format for burned DVD's. In terms of burning Xbox 360 games, older versions of the Xtreme firmware required that DVD+R DL discs be booktyped to DVD-ROM to boot. This is not the case for Xtreme firmware 4x and later or any of the iXtreme firmware. Most all newer DVD burners support booktying.

    1. Open ImgBurn.

    2. Click the book icon in the lower right portion of the program, highlighted by a square in the following picture:



    3. Select your model burner from the menu. In this case I will select Liteon, since I have a Liteon 16W1P.



    4. In the change for box, select DVD+R DL.



    5. In the new setting box, select DVD-ROM.



    6. Click change.

    7. Success! Click ok, and burn as normal.

    Final Notes

    1. Always make sure your firmware is up to date. You can check for firmware updates by going to tools-->drive-->check for firmware updates in ImgBurn, or typing your make and model drive into the search box her at The Firmware Page

    2. Make sure your burner is in DMA mode. This only applies to IDE drives, not SATA.
    How to enable DMA in Windows XP (with pictures) - CDRLabs.com Forum

    3. Use quality media! Verbatim Dual Layer media is excellent quality, using any other type of Dual Layer media is a gamble.

    4. Always close all programs before burning, including Internet, Instant Messenger, Anti-Virus, etc.

    5. Any game ripped with newer versions of Xbox Backup Creator should pass all Xtreme/iXtreme stealth checks. To check the stealth status of your iso, use DVD XDVDMulleter.
    Follow me on Twitter [Only registered and activated users can see links. ]
    Xbox One: Outsider734

  2. The Following 5 Users Say Thank You to Outsider For This Useful Post:


  3. Join Date

    Posts n/a

    Membership Unregistered / Not Logged In

    Reputation:

    06-17-2012 11:58 PM #2

    Quote Originally Posted by Outsider View Post
    This guide will show to backup Xbox 360 games with Xbox Backup Creator and ImgBurn.

    What's Required:

    1. Original Xbox 360 Game

    2. DVD-ROM drive capable of reading Xbox 360 games: There are a couple drives that are capable of this. By far the most common way is to purchase a Samsung SH-D162C and flash it with Kreon's firmware. In America these drives are no longer in production, the best place to find one is on eBay. Expect to pay about $60 for one, well worth it for backing up your original Xbox 360 games. Most times the drives will come preflashed with Kreon's firmware, if not, download Kreon's firmware off Xbins and flash it with an app called sfdnwin. All the necessary tools for flashing the SH-D162C come with the Kreon firmware download on Xbins. The other methods involve dissembling the Xbox 360 console, hooking the 360 DVD-ROM drive up to your PC via a SATA cable/connectivity kit, and using it to read the 360 games. Using the Samsung SH-D162C is much easier. The SH-D162C is for reading Xbox 360 games only, a Dual Layer burner is required to burn 360 games.

    3. Dual Layer DVD Burner: Any Dual Layer burner will work, one capable of booktyping is recommended. Most all newer DVD burners are capable of booktying/bitsetting DVD+RL to DVD-ROM.

    4. Modified Xbox 360 Console: Your Xbox 360 must be flashed with the hacked Xtreme or iXtreme firmware in order to boot backups. Flashing the 360 involves dissembling it, hooking the DVD-ROM up to your PC via SATA cable/Connectivity kit, and flashing it through dos. The flash method is different depending on whether you have a Samsung, Hitachi, or BenQ DVD-ROM drive. There is currently Xtreme firmware available for all 360 DVD-ROM drives in circulation. For more info on flashing the Xbox 360, check here: (Will post tutorial guide later)

    5. Xbox Backup Creator: [Only registered and activated users can see links. ]

    Mirror: RapidShare: [Only registered and activated users can see links. ]

    6. ImgBurn: [Only registered and activated users can see links. ]

    7. Blank DVD+R DL: Verbatim's are highly recommended, their quality is unmatched by other Dual Layer media. DVD-R DL discs will not work, a blank DVD+R DL is required.

    Before Starting

    Open Xbox Backup Creator. Click the options tab. Set your options as follows:



    Tweak as necessary according to your setup/preferences. It's not necessary to tweak any settings to get a working Xbox 360 backup. Mainly I recommend setting the block retry and sector retries to 20, in the event the disc is scratched or dirty, Xbox Backup Creator will attempt to reread the corrupted block/sector a maximum of 20 tries before giving the user the option to fill it with zeros or attempt a manual retry. I suggest selecting the manual retry option, filling with zeros is never a good idea. If after several manual retries XBC is stuck at the same point, it's probably best to cut your losses and abort the rip process.

    Splitvid

    Splitvid is a new option used for ripping isos found in Xbox Backup Creator 2.6 and later. Basically, the way that XBC rips backups currently, it only rips about half of the actual video partition of the disc, resulting in the standard iso size of 7.05GB's. The splitvid option rips the entire video partition, resulting in an iso size of 7.29GB's. Splitvid isos cause numerous compatibility issues on Xtreme firmwares, and backups created with splitvid enabled may not boot at all on any 360 flashed with Xtreme firmware. So if you are using any of the Xtreme firmware, make sure splitvid is turned off in Xbox Backup Creator before ripping. With iXtreme firmware it doesn't matter if splitvid is enabled. With Xtreme firmware, be sure to disable it! You can disable splitvid in the options in Xbox Backup Creator 2.6 and later, here is a picture showing how to disable the splitvid option.



    GUIDE

    1. Insert your original Xbox 360 game into the Samsung SH-D162C.

    2. Open Xbox Backup Creator.



    3. Click the drive tools tab. Click Unlock drive.



    4. Click the read tab.



    5. Make sure complete backup is checked, and click start.



    6. This menu will appear. Select a name and destination for your iso. I recommend saving the iso image to the desktop for easy access. Click save when you are done.



    7. The game will begin to rip. A normal rip will take 10-12 minutes.



    8. It's finished! This message will pop up. Click okay. Once completed a dvd file and iso file will be created. The dvd file is what you want to load into ImgBurn.



    9. Close Xbox Backup Creator.

    10. Insert a blank DVD+R DL disc into your Dual Layer DVD Burner.

    11. Open ImgBurn.

    12. Select Mode-->Write. Select your Dual Layer Burner in the Destination box, I select the Liteon 16W1P here.



    13. Click the browse for file button at the top left of ImgBurn, highlighted with a square in the following picture. As an alternative to clicking the browse button, you can drag and drop the dvd file into ImgBurn, which is why I suggested saving the iso and dvd file to the desktop earlier during the rip process.



    14. The following menu will appear. Browse to your dvd file and doubleclick it or single click it and click open.



    15. The dvd file will now be loaded into ImgBurn. The LB next to the sectors portion of ImgBurn stands for Layer Break. Basically this is where the end of the first layer stops and the beginning of the second layer begins on a Dual Layer disc. The LB should always read 1913760 for Xbox 360 games. Set the write speed to 2x or 4x. Click write at the bottom of the program.



    16. The game will then be burned to disc. The burn process will take about 45 minutes at 2x, 25 minutes at 4x.

    [Only registered and activated users can see links. ]

    17. It's done! Click okay.



    Booktying with ImgBurn

    Bootyping means to change the way a DVD-ROM drive reads a DVD+R or DVD+R DL disc. When you booktype a disc from DVD+R or DVD+R DL to DVD-ROM, it will read the burned disc as a DVD-ROM, the same booktype as a pressed or store-bought DVD. DVD-ROM is the most universally compatible format for burned DVD's. In terms of burning Xbox 360 games, older versions of the Xtreme firmware required that DVD+R DL discs be booktyped to DVD-ROM to boot. This is not the case for Xtreme firmware 4x and later or any of the iXtreme firmware. Most all newer DVD burners support booktying.

    1. Open ImgBurn.

    2. Click the book icon in the lower right portion of the program, highlighted by a square in the following picture:



    3. Select your model burner from the menu. In this case I will select Liteon, since I have a Liteon 16W1P.



    4. In the change for box, select DVD+R DL.



    5. In the new setting box, select DVD-ROM.



    6. Click change.

    7. Success! Click ok, and burn as normal.

    Final Notes

    1. Always make sure your firmware is up to date. You can check for firmware updates by going to tools-->drive-->check for firmware updates in ImgBurn, or typing your make and model drive into the search box her at The Firmware Page

    2. Make sure your burner is in DMA mode. This only applies to IDE drives, not SATA.
    [Only registered and activated users can see links. ]

    3. Use quality media! Verbatim Dual Layer media is excellent quality, using any other type of Dual Layer media is a gamble.

    4. Always close all programs before burning, including Internet, Instant Messenger, Anti-Virus, etc.

    5. Any game ripped with newer versions of Xbox Backup Creator should pass all Xtreme/iXtreme stealth checks. To check the stealth status of your iso, use DVD XDVDMulleter.
    Good to see you're contributing something
    Last edited by Gambler....; 06-18-2012 at 12:33 AM.

  4. Mudkip's Avatar

    Mudkip Retired Moderator

    Join Date Apr 2010

    Posts 3,838

    Membership Former Staff

    Reputation: 22108

    07-14-2012 10:55 AM #3

    Nice to see your contribution to the tutorial sec. Outie!

    and may I say, nice tutorial, will come in handy if I ever want to backup an xbox game
    [Only registered and activated users can see links. ] | [Only registered and activated users can see links. ] | [Only registered and activated users can see links. ] | [Only registered and activated users can see links. ]

    Any Questions about NGU in general? Feel free to [Only registered and activated users can see links. ] or [Only registered and activated users can see links. ] me!


  5. The Following User Says Thank You to Mudkip For This Useful Post:


  6. ofashao Keeper

    Join Date Jul 2012

    Posts 15

    Membership Standard

    Reputation: 10

    07-18-2012 12:38 PM #4

    thank you now I can save all my data!

  7. Join Date Oct 2010

    Posts 1,176

    Membership Former Staff

    Reputation: 8466

    07-31-2012 10:58 AM #5

    Great tutorial Outtie, keep up the work. :y:

    [Only registered and activated users can see links. ]

  8. Join Date Jul 2012

    Posts 19

    Membership Standard

    Reputation: 17

    08-06-2012 07:51 PM #6

    AWSOME!! nice man

    ---------- Post added at 12:51 AM ---------- Previous post was at 12:50 AM ----------

    does this 100% works?

  9. NeedaSlutSoon's Avatar

    NeedaSlutSoon NextGenUpdate Elite

    Join Date Jul 2009

    Posts 568

    Membership Elite

    NextGenUpdate Elite Member

    Reputation: 6835

    09-04-2012 09:39 PM #7

    Thank you Outie

    Membership: ELITE and Premium
    Send me a [Only registered and activated users can see links. ]
    Send me a [Only registered and activated users can see links. ]
    Member Since: July, 2009
    Latest [Only registered and activated users can see links. ]

  10. nachicho Gobble

    Join Date Aug 2012

    Posts 1

    Membership Standard

    Reputation: 10

    09-04-2012 10:18 PM #8 hope

    thats a goos tutorial man, congratulations

  11. Join Date Jul 2012

    Posts 980

    Membership Banned

    Reputation: 13813

    09-15-2012 09:09 PM #9

    Awesome thanks man

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •