Post: [HowTo] DDoS/Disconnect Ip(s)
Options
03-28-2010, 11:43 PM
#1
Ab-Soul
NGU: Oxide
This is a *Tutorial* on how to DoS IP Addresses
Your going to need (2) Ethernet slots/ports "NON-WIRELESS" - "$20.00 bucks at BestBuy for an External/secondary slot. | This is to Bridge your Two connections - to Receive and Send Packets.
**Not Always, but you'll need a "Cross-Over-Cable". This is to Receive and Send Packets. - For info about this, please vistit these links:
Info on a Cross-Over-Cable: You must login or register to view this content.
Where you can buy one Cheap: You must login or register to view this content.
Info on [How To] make a Cross-Over-Cable: You must login or register to view this content.
Go to: You must login or register to view this content. then click "Download" on the top navigation. Once you proceed on Download section you want to click "Commview 6.1" or for Wireless, click "Commview for WiFi 6.2"
Next, Install Setup, and Continue to install and leave the selections of installing itself alone. (Click Yes/Continue threw out install setup)
((PT.2))
Your going to need (2) Ethernet slots/ports "NON-WIRELESS" - "$20.00 bucks at BestBuy for an External/secondary slot. | This is to Bridge your Two connections - to Receive and Send Packets.
**Not Always, but you'll need a "Cross-Over-Cable". This is to Receive and Send Packets. - For info about this, please vistit these links:
Info on a Cross-Over-Cable: You must login or register to view this content.
Where you can buy one Cheap: You must login or register to view this content.
Info on [How To] make a Cross-Over-Cable: You must login or register to view this content.
Go to: You must login or register to view this content. then click "Download" on the top navigation. Once you proceed on Download section you want to click "Commview 6.1" or for Wireless, click "Commview for WiFi 6.2"
Next, Install Setup, and Continue to install and leave the selections of installing itself alone. (Click Yes/Continue threw out install setup)
((PT.2))
Now, once you have your TWO Ethernet slots/ports, you need to Bridge your Two Connections will your "Cross-Over-Cable" Connected to your 2nd Network card/Ethernet slot.
Info on [How To] Bridge your (2) Connections: You must login or register to view this content.
Now, you can DoS/Disconnect an IP from Commview by Sending Packets, but it CAN be Difficult so, TAKE YOUR OWN TIME - to search for and DoSer of and IP LAGGER, """""Alot of people use Net-tools which is a GREAT program with Various Network Tools. Link: You must login or register to view this content.
This [How To] is not 100% explanatory.
ALL Credit goes to Oxide, Besides Video Tutorials & Additional Programs provided. 100% Hand Typed, hope this helps. ANY Q's ask me!!!
Now, While Commview is opened, Click on the START Button. This will start scanning ALL ip's that are connected to you. "from your Cross-Over & Bridged Connections".
Now, you can DoS/Disconnect an IP from Commview by Sending Packets, but it CAN be Difficult so, TAKE YOUR OWN TIME - to search for and DoSer of and IP LAGGER, """""Alot of people use Net-tools which is a GREAT program with Various Network Tools. Link: You must login or register to view this content.
This [How To] is not 100% explanatory.
ALL Credit goes to Oxide, Besides Video Tutorials & Additional Programs provided. 100% Hand Typed, hope this helps. ANY Q's ask me!!!
Last edited by
Ab-Soul ; 01-30-2012 at 08:39 AM.
Reason: link coding messed up
The following 4 users say thank you to Ab-Soul for this useful post:
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
