(adsbygoogle = window.adsbygoogle || []).push({}); Hello all, I've decided to make this tutorial as I've known 6 people that bricked their PS3 due to the 4.11 Rebug Spoofer recently released.

Requirements:
USB with 800 MB free space
3.55 PS3 already

[multipage=The Fast Way]
Another way to fix this mentioned by a slew of people is to restore your system through recovery menu with the original 3.55 update, and then install your custom firmware again. I haven't verified this way, so do this at your own risk.

[multipage=My Way]
Warning: You may have a chance of a perma brick using this method


First of all, you need to download these files:
RSOD Fix.pkg

You must login or register to view this content.


NORSOD patched PUP

You must login or register to view this content.


Now put the .PKG file onto the root of your USB like any other package file.
Once you've done that go to the root of your USB and make this: PS3 > UPDATE
Inside of the UPDATE folder you put the UPDAT.PUP
Go to your PS3 and hold down the power button. It will do a few beeps and then turn off, once it does that hold it down again until you hear 2 beeps in a row. Once you do that you let go of the power button. You're now in Recovery Mode.

From Recovery Mode, you scroll down to the last option: Update. MAKE SURE YOU DON'T HAVE ANY DISCS IN YOUR PS3 WHEN YOU DO THIS. Choose Update, and press select and start at the same time. It should recognize your USB with the update on it etc. Update it with that.

Once the update is finished, install the .PKG file. Then run it from the XMB.

Now, you are completely unbricked/red screened. All you have to do now is get the CFW you want to put back on it, and replace the UPDAT.PUP inside of your USB and update it through media device.

I hope this helped you guys, and if you have any questions feel free to ask. I do not take credit for these files, or the tutorial. I just wanted to share my find with you guys.

[multipage=The Safe Way]
You must login or register to view this content.

Place this Lv2diag.self in the root of an empty USB flash dongle, and use any method to toggle Factory Service Mode (FSM)

1.)Copy the .self (in the download) to the root of a USB flash drive.

2.)Rename the file to Lv2diag.self.

3.)Place the flash drive in the right most USB port.

4.)Toggle FSM.

5.)Boot PS3

6.) During FSM boot, the Lv2diag.self will execute.

If you hear a single beep and your PS3 returns to XMB it was successful (obviously)

If you will hear one or more beeps, and the playstation3 will shutdown. If you experience a failure, its likely due to your FLASH being corrupt beyond repair or a hardware problem.
Method by: PS3 Prodigy

This literally just happened to me like 15 minutes ago :wah:

I semi bricked my ps3 but i fixed it via system recovery. I will keep this guide bookmarked in case i need it thanks OP

Hopefully this will fix it up for you. If you have any questions just ask.

i have true blue CFW on 3.55
will i be ok installing this spoofer? without the dongle in

what causes these bricks

Thanks dude! I love you! :love:

mine RSOD and all i did was re install rebug and it worked.

Yeah I got RSOD, didnt care too much.

Went to recovery menu, popped official 3.55 firmware onto memory stick (PS3--> UPDATE-->UPDATE.PUP)
Jailbroke, installed spoofer, worked

NOTE: HDD is formatted!

amazed.
what to do though?

It bricked for me whenever I changed from normal mode to debug with Rebug Selector. As for the spoofer and true blue I have no idea since Rebug has the Rebug Selector PKG

---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ----------



That may be another way as well, I just went off of another tutorial I found.

i got it working anyway :y:

now thinking how to get the most out of this