(adsbygoogle = window.adsbygoogle || []).push({});
There is now an easier way to permanently change your IDPS and PSID
I recently found a PKG that's gives a easier way to permanently change the IDPS and PSID without the need of Cygwin or copies of your Nor/Nand flash
To be able to complete this is you need the following tools:
• Jailbroken ps3
• USB drive (pen drive)
• EI0 root key dumper signed for 4.50
You must login or register to view this content.
• EI0 root key dumper signed for 3.55
You must login or register to view this content.
• MultiMan
• Hex editor
• New valid IDPS
• IDPSET PKG 0.6
You must login or register to view this content.
OPTIONAL
Load MultiMan and open system information at the bottom you will see your current IDPS take a note if you want just so you can compare afterwards to see if it has changed
MUST
1. firstly you need to dump your EEID root key find above the link for a signed 4.50 PKG, no longer need to downgrade to dump root key, if you’re on 3.55 you will also find the link above.
Simply install the appropriate PKG for your (CEX) CFW and run it, your ps3 will beep 3 times and restart. DONT PANIC ITS NORMAL!!
Your root key has been successfully dumped
Know you need to find your dumped key
And copy to your USB
Load Up MultiMan and load the file manager
Go to the following directory depending on the firmware you’re using
Dev_hdd0/tmp/ for 3.55
[ATTACH=CONFIG]28187[/ATTACH]
Dev_hdd0/game/FLTZ00010/USRDIR for 4.50
[ATTACH=CONFIG]28188[/ATTACH]
Copy the root key to the root of the USB drive
[ATTACH=CONFIG]28190[/ATTACH]
2 install the IDPSET PKG and run the PKG
3 once open you will be presented with a few options
[ATTACH=CONFIG]28189[/ATTACH]
Firstly you will see your current IDPS
Underneath you will see:
• Save IDPS
• Load IDPS
• Edit IDPS
• Generate a DEX and a CEX dump of the current NOR/Nand
• Go To PSID
• EXIT
Know you have two options on how to change the IDPS
SECOND OPTION is ALOT Easier!
FIRST OPTION
Highlight Load IDPS
This has a sub menu highlight load IDPS and press right on the Dpad
You will see
Load IDPS
from file
From EID0
From EID5
What you want to select here is from file,
this is where you require a new valid IDPS
On your desktop you need to create a bin file
Easiest way to do this
Select the save IDPS option above and enter its sub menu by pressing right on the Dpad
Then select:
To file this will save it to your USB drive (pen drive)
Insert USB into your computer and drag to desktop
With hex editor installed you can simply double click the IDPS.BIN file and it will open
Change this file to the new valid IDPS and save
Reinsert the USB to your ps3 and highlight Load IDPS enter submenu using right on the Dpad
And select from file
If you have done it correctly you will see the IDPS at the top change to the new VAILD IDPS
Now to flash to the ps3 memory
You require your EEID root key on the root of your USB
And the edited IDPS FILE from earlier
Once you have these on you USB
Simply highlight Save IDPS and open the sub menu
This time you want to click: to EID0 and EID5
You will see that wait appears in green in the top left
Wait to this disappear take only a few seconds
And you’re done
Restart ps3
Load MultiMan and open system information
If you look at the bottom you should see your newly valid IDPS flashed
OPTION 2
Open up IDPSET on ps3
Press x to select edit
This will allow you to edit the IDPS you see when you open the PKG
Edit the IDPS TO THE NEW VAILD IDPS
Once you’re happy
Simply highlight Save IDPS and open the sub menu
This time you want to click: to EID0 and EID5
You will see that wait appears in green in the top left
Wait to this disappear take only a few seconds
And you’re done
Restart ps3
Load MultiMan and open system information
If you look at the bottom you should see your newly valid IDPS flashed
How To Change and Flash a NEW PSID
TOOLS REQUIRED
• JAILBROKEN PS3
• EID ROOT KEY ON ROOT OF USB
• NEW PSID
• HEX EDITOR
MAKE SURE YOUR EID ROOT KEY IS ON THE ROOT OF YOUR USB AND COONECTED TO YOU PS3 OTHERWISE IT WON’T FLASH
Open up the IDPSET program
Towards the bottom you will see
GO TO PSID TOOL
Highlight it and press X
This will open a new screen
You will see your current PSID
And the following options
SAVE PSID- TO FILE
TO EID
LOAD PSIS-FROM FILE
GO TO PSID
EXIT
Firstly you need to create a PSID.bin on your desktop
Easiest way is to choose:
Save PSID to file option
This will save your current PSID to your USB
Unplug your USB and connect to your desktop
Open up your USB and find the PSID.bin file you just saved
Drag to desktop
With hex editor installed simply double click to open the file
In the file edit the text with your new PSID once happy save it and close it
Drag file back to USB
Reconnect your USB to PS3
This time you want to select
LOAD PSID-FROM FILE
If done correctly you will see the onscreen PSID change to the one you created in the PSID.bin file
TO FLASH TO PS3 MEMORY
MAKE SURE YOUR EID ROOT KEY IS ON THE ROOT OF YOUR USB AND COONECTED TO YOU PS3 OTHERWISE IT WON’T FLASH
Select
SAVE PSID to EID
You may see a green wait sign in the top left
Wait until it disappears or says done
Congratulations
If you have followed this correctly you will have successfully and
Permanently Changed your IDPS and PSID
Now you have it all set up
If you require changing it again it will take only a few seconds
SOURCES
3.55 ROOT KEY DUMPER PKG
You must login or register to view this content.
4.50 ROOT KEY DUMPER PKG
[url=
https://store.brewology.com/ahomebrew.php?brewid=228[/URL]
IDPS SET
You must login or register to view this content.
ALL DOWNLOAD LINKS ARE TAKEN FROM THE ORIGINAL SOURCES
HOPE THIS HELPS!