(adsbygoogle = window.adsbygoogle || []).push({});

★★★ Ultimate Modding Thread ★★★

You need to be on the latest firmware on your PS3 to play Playstation Home, doesn't matter if it's a CEX or DEX. Otherwise you will get this error "There has been a problem downloading content"
Or, you can use the bypass that gives you the ability to get on Playstation Home with any firmware.

Hello everyone! How y'all doing?
So finally, some mods of Playstation Home are out. So I decided to write a full tutorial about modding Playstation Home with step-by-step tutorial!

I will try to keep this topic updated as much as I can, so lets get started!

---

---

First of all I will write a tutorial about How to boot Playstation Home for RTE Setup.
*This is only required for people who uses any firmware that doesn't support NPDRM Self files, such as Rebug*

Okay so download this file from You must login or register to view this content.

Then you have to make sure that you have a folder called GAMES in the dev_hdd0 so it would be dev_hdd0/GAMES
Move that file you just download to the GAMES folder and go back to multiMAN games tab and you will find a Playstation Home disc version there. Now all you need to do is click on it and it should move you back to the XMB and boot Playstation Home as a disk

Now you're ready to launch Playstation Home with a Debug Eboot.

---

Now once you know how to boot home with RTE Setup all you need now is the mods you need and ..etc

---

How to use the Relocator with RTE.

Basically the Relocator for RTM is an exploit that lets you change the destination id for a space to another.

You will be able to visit apartments and other "ghost" spaces easily with this way, but you won't be able to go to spaces that are in different regions.

Okay so lets get started.

First of all go to the Navigator and highlight any space you want the relocator to work with (You can use apartments)
Go to this offset: 0x52000000 and search for the space's name, for example I used Home Square and this is what appeared:

You must login or register to view this content.

If you take a look at the highlighted part, it's the Destination ID. You can replace it with whatever place's Destination ID you want....
You can change the name of the space as well, but it's useless anyways.
Hope everyone understood the tutorial very well, and enjoy.

---

How to make Custom Club names with RTE.

Anyways all you need to do now is go into your Harbour Studio or whatever place you want and click on:
Start -> News & Social -> Clubs -> Create Club
Then as the club name write anything like Blablabla and then run NetCheat and search in the 5's ranges which are:

    50000000-53FFFFEC 

search for the club name you put, you should find it in the NetCheat then put the offset on the Debugger and change it to whatever you want

So you might be like there are symbols in the Japanese accounts, that's correct but there are more symbols that aren't on Japanese accounts like the buttons ...etc

Here's a list of the buttons that you can use:

E2 95 90 - CIRCLE BUTTON
E2 95 91 - CROSS BUTTON
E2 95 92 - D-PAD DOWN
E2 95 93 - D-PAD LEFT
E2 95 94 - D-PAD RIGHT
E2 95 95 - D-PAD UP
E2 95 96 - L1 BUTTON
E2 95 97 - L2 BUTTON
E2 95 98 - L3 BUTTON
E2 95 99 - L BUTTON
E2 95 9A - R1 BUTTON
E2 95 9B - R2 BUTTON
E2 95 9C - R3 BUTTON
E2 95 9D - R BUTTON
E2 95 9E - SELECT BUTTON
E2 95 9F - SQUARE BUTTON
E2 95 A0 - START BUTTON
E2 95 A1 - TRIANGLE BUTTON
E2 95 A2 - D-PAD UP AND DOWN
E2 95 A3 - D-PAD LEFT AND RIGHT
E2 95 A4 - D-PAD FULL
E2 95 A5 - PS3 CONTROLLER

---

How to change out preset text messages, like Hello & Goodbye.

Go on Playstation Home, open up NetCheat.
Head over to the "Search" tab. Now make the Val Type to: text, and start/stop range to

    50000000 -> 60000000

.
You will search for: Where are you from? make NetCheat look like this before starting the scan: You must login or register to view this content.
also make sure to Attach & Connect PS3 Before starting the scan of-course!
Click "Start Initial scan" wait until it's done then follow our next step in this tutorial.
While scanning, it should look something like this: You must login or register to view this content. (Not exactly same)
Once it's done, it may variate if you have 3-10 results. However, take each address and go to it. Change it to something random, and check if the change appeared on Playstation Home. If it did, ask your friend if he can see your customized preset message.. If he can, you succeed!

In my case, I got four results : You must login or register to view this content.
I will now grab one of the results : You must login or register to view this content. the address of it, and search for it in debugger. I will now change it, and check if the change appears on Playstation Home & For my other friends.. If it does, we've succeed!

And yes btw, you still can use the buttons with this, incase you haven't seen the tutorial above, here's the list:

E2 95 90 - CIRCLE BUTTON
E2 95 91 - CROSS BUTTON
E2 95 92 - D-PAD DOWN
E2 95 93 - D-PAD LEFT
E2 95 94 - D-PAD RIGHT
E2 95 95 - D-PAD UP
E2 95 96 - L1 BUTTON
E2 95 97 - L2 BUTTON
E2 95 98 - L3 BUTTON
E2 95 99 - L BUTTON
E2 95 9A - R1 BUTTON
E2 95 9B - R2 BUTTON
E2 95 9C - R3 BUTTON
E2 95 9D - R BUTTON
E2 95 9E - SELECT BUTTON
E2 95 9F - SQUARE BUTTON
E2 95 A0 - START BUTTON
E2 95 A1 - TRIANGLE BUTTON
E2 95 A2 - D-PAD UP AND DOWN
E2 95 A3 - D-PAD LEFT AND RIGHT
E2 95 A4 - D-PAD FULL
E2 95 A5 - PS3 CONTROLLER

---

How to spam the chat log.

Okay so this tutorial is pretty short and simple.

First you need to go to this offset on Debugger:

    0x1063EC2C

Change the 01 to 00
Spam as much as you want
Change the offset back to 01
Make sure you don't stay too much time having the offset set to 00 because you will disconnect

Now people will get whatever you said in one shot and in one time.

Happy spamming :lulz:

---

Tools that have been around on Playstation Home and here!

You must login or register to view this content.
You must login or register to view this content.
You must login or register to view this content.
You must login or register to view this content.
You must login or register to view this content.

---

How to change the Run Speed and Walk Speed in RTE.

First of all go to this offset in Debugger:

    0x10155700

Change the first 4 bytes which are:

    40 60 00 00

It will be like this if you're having the default Run Speed

Go to this offset in Debugger:

    0x101556F8

Change the first 4 bytes which are:

    3F 00 00 00

You can use this site to convert from float to hex and vice versa: You must login or register to view this content.

---

How to Activate The Admin Mode!

So anyways this is pretty easy thing to do and hope you all enjoy it as much as I did.

Lets head to the exploit itself.
So you need to open up Debugger and head to this offset:

    0x104F7320

Then highlight the first 4 bytes and copy them just like in this picture:

You must login or register to view this content.

Take those 4 bytes and paste them in the Address bar and add

    0x6A85

to it, picture to explain:

You must login or register to view this content.

Change the first for bytes to

    00110000

to have the Admin Activated, picture to explain:

You must login or register to view this content.

Once you've done that you now activated The Admin Mode and gave yourself the ! [MOD] Prefix
You can also press R3 on your controller to have a Free Camera, you can use it as a teleporter with this command:

    teleportToCamera

---

This is the end of the tutorial, I hope you all understood what I've said and enjoyed it.

Also keep in mind that this tutorial isn't finished YET! So keep looking for more stuff going on

Happy modding!


Credits:

This is a PsHomeCentral exploit, I just shared it. That won't change the fact that it's not a PsHomeCentral exploit, if you want to post it on your own forum please give credits to us, and PsHomeCentral

You must login or register to view this content. - Exploits and Addresses
You must login or register to view this content. - Exploits and Addresses
You must login or register to view this content.- Exploits and Addresses
You must login or register to view this content. - Exploits and Addresses
You must login or register to view this content. - Tool and Coding
You must login or register to view this content. - Tool and Coding
You must login or register to view this content. - Coding
You must login or register to view this content.- Coding
You must login or register to view this content. - CEX2DEX Tutorial
You must login or register to view this content. - Target Manager + Debugger Tutorial

Thanks for posting the rest of it

Nice buddy!

Great job bro, but the link doesn't work
Could u fix it please

Fixed it, thanks for letting me know

Thanks for this great release, now hopefully the Home devs will do something about the freeze.

Also lets not forget, without xIC3D/mcmar all this wouldn't be possible so we all need to thank him... sarcasm, lmao.

Nice thanks

items?

I get a network error when loading, "There has been a problem downloading content"

Looks nice bud.