Post: [Help] Blackscreen After switch to DEX (REBUG 4.30.2 REX)
Options
04-29-2013, 09:28 AM
#1
themind
Keeper
Hi everyone ..
i downgraded my ps3 from 4.40 ofw to 4.40 Rogero updated to Rogero Downgrader ..
then downgraded to Rebug 3.55 finally updating it to Rebug Rex 4.30.2
(using e3 flasher no jailbreak dongle method) .
when i went to Rebug 4.30.2 i changed it from CEX to DEX using Rebug toolbox
(extracting eid_root_key from Rebug 3.55 and Cex Dump and using Cex2Dex tool ) ..
everything worked fine and i did change to Dex successfully ..
then after all that ( the problem took place)
i tried to connect to "ProDG Target Manager" (had full intent to RTE )
connected the ps3 to Router then to a PC and it connected ..
to be honest i kind of made a bad move which i probably shouldn't ..
while the MW3 disk and game is running on ps3, using ProDG Target Manager on PC ..
i right clicked on the ps3 (while connected) and chose (Reset) ..
immediately i noticed ps3 went to black screen (which before it was on private lobby) ..
tried to restart with ps3 power button and it did but with black screen ..
went to recovery mode and it worked ..
restored whole system (step5) and ps3 worked for the next reboot but when i try reboot it again, it gives me black screen
and system won't work till i keep pressing power button and hear 1 beep ..
i did update to rogero 4.40 > Rogero Downgrader > Rebug 3.55 > Rebug 4.30 Cex the whole process again .
and it seems that the problem is with Dex only ..
cause when i go to Rebug toolbox and switch it back to Cex ps3 work perfectly
but when i swap to Dex,black screen on next reboot ..
could my DEX dump be corrupt after using it alot ?
is problem with the hard drive ?
am i stuck on Cex forever or is there a sloution ?
note: im on Rebug Rex 4.30.2 (Cex) so i can upgrade or downgrade .
sorry for taking long but i thought making it clear to you what i'm facing ..
so can you help me please with this ?? im really in need to hear from pros ..
Sloution : turning on PS3 into Blackscreen > Run [ProDG Target Manager] >Target >PS3 [IP]> Right Click > Reset Mode >Check [System Software Mode] > Right Click PS3 [IP] > Reset
i downgraded my ps3 from 4.40 ofw to 4.40 Rogero updated to Rogero Downgrader ..
then downgraded to Rebug 3.55 finally updating it to Rebug Rex 4.30.2
(using e3 flasher no jailbreak dongle method) .
when i went to Rebug 4.30.2 i changed it from CEX to DEX using Rebug toolbox
(extracting eid_root_key from Rebug 3.55 and Cex Dump and using Cex2Dex tool ) ..
everything worked fine and i did change to Dex successfully ..
then after all that ( the problem took place)
i tried to connect to "ProDG Target Manager" (had full intent to RTE )
connected the ps3 to Router then to a PC and it connected ..
to be honest i kind of made a bad move which i probably shouldn't ..
while the MW3 disk and game is running on ps3, using ProDG Target Manager on PC ..
i right clicked on the ps3 (while connected) and chose (Reset) ..
immediately i noticed ps3 went to black screen (which before it was on private lobby) ..
tried to restart with ps3 power button and it did but with black screen ..
went to recovery mode and it worked ..
restored whole system (step5) and ps3 worked for the next reboot but when i try reboot it again, it gives me black screen
and system won't work till i keep pressing power button and hear 1 beep ..
i did update to rogero 4.40 > Rogero Downgrader > Rebug 3.55 > Rebug 4.30 Cex the whole process again .
and it seems that the problem is with Dex only ..
cause when i go to Rebug toolbox and switch it back to Cex ps3 work perfectly
but when i swap to Dex,black screen on next reboot ..
could my DEX dump be corrupt after using it alot ?
is problem with the hard drive ?
am i stuck on Cex forever or is there a sloution ?
note: im on Rebug Rex 4.30.2 (Cex) so i can upgrade or downgrade .
sorry for taking long but i thought making it clear to you what i'm facing ..
so can you help me please with this ?? im really in need to hear from pros ..
Sloution : turning on PS3 into Blackscreen > Run [ProDG Target Manager] >Target >PS3 [IP]> Right Click > Reset Mode >Check [System Software Mode] > Right Click PS3 [IP] > Reset
Last edited by
themind ; 04-29-2013 at 12:08 PM.
Reason: Solved
05-09-2013, 09:59 PM
#2
![[COD]Rebug DEX's Avatar](/images/avatars/thumbs/872493.jpg?cache=1357539116 "[COD]Rebug DEX's Avatar")
[COD]Rebug DEX
Bounty hunter
08-24-2013, 05:08 PM
#3
ItsSwiftyy
Haxor!
hey cud really use help. i was on dex and i went into rebug tool. i was told to go to ps3id and set it to cex so sony cant detect me. i quit the tool and it said it will reboot. it was a blakscreen. i kept trying to turn it on. well, then i went into recovery mode, tried restarting the ps3 from there. i tried rebiulding datbase restoring system . nothing worked, im still on blakscreen
Originally posted by themind
Hi everyone ..
i downgraded my ps3 from 4.40 ofw to 4.40 Rogero updated to Rogero Downgrader ..
then downgraded to Rebug 3.55 finally updating it to Rebug Rex 4.30.2
(using e3 flasher no jailbreak dongle method) .
when i went to Rebug 4.30.2 i changed it from CEX to DEX using Rebug toolbox
(extracting eid_root_key from Rebug 3.55 and Cex Dump and using Cex2Dex tool ) ..
everything worked fine and i did change to Dex successfully ..
then after all that ( the problem took place)
i tried to connect to "ProDG Target Manager" (had full intent to RTE )
connected the ps3 to Router then to a PC and it connected ..
to be honest i kind of made a bad move which i probably shouldn't ..
while the MW3 disk and game is running on ps3, using ProDG Target Manager on PC ..
i right clicked on the ps3 (while connected) and chose (Reset) ..
immediately i noticed ps3 went to black screen (which before it was on private lobby) ..
tried to restart with ps3 power button and it did but with black screen ..
went to recovery mode and it worked ..
restored whole system (step5) and ps3 worked for the next reboot but when i try reboot it again, it gives me black screen
and system won't work till i keep pressing power button and hear 1 beep ..
i did update to rogero 4.40 > Rogero Downgrader > Rebug 3.55 > Rebug 4.30 Cex the whole process again .
and it seems that the problem is with Dex only ..
cause when i go to Rebug toolbox and switch it back to Cex ps3 work perfectly
but when i swap to Dex,black screen on next reboot ..
could my DEX dump be corrupt after using it alot ?
is problem with the hard drive ?
am i stuck on Cex forever or is there a sloution ?
note: im on Rebug Rex 4.30.2 (Cex) so i can upgrade or downgrade .
sorry for taking long but i thought making it clear to you what i'm facing ..
so can you help me please with this ?? im really in need to hear from pros ..
Sloution : turning on PS3 into Blackscreen > Run [ProDG Target Manager] >Target >PS3 [IP]> Right Click > Reset Mode >Check [System Software Mode] > Right Click PS3 [IP] > Reset
i downgraded my ps3 from 4.40 ofw to 4.40 Rogero updated to Rogero Downgrader ..
then downgraded to Rebug 3.55 finally updating it to Rebug Rex 4.30.2
(using e3 flasher no jailbreak dongle method) .
when i went to Rebug 4.30.2 i changed it from CEX to DEX using Rebug toolbox
(extracting eid_root_key from Rebug 3.55 and Cex Dump and using Cex2Dex tool ) ..
everything worked fine and i did change to Dex successfully ..
then after all that ( the problem took place)
i tried to connect to "ProDG Target Manager" (had full intent to RTE )
connected the ps3 to Router then to a PC and it connected ..
to be honest i kind of made a bad move which i probably shouldn't ..
while the MW3 disk and game is running on ps3, using ProDG Target Manager on PC ..
i right clicked on the ps3 (while connected) and chose (Reset) ..
immediately i noticed ps3 went to black screen (which before it was on private lobby) ..
tried to restart with ps3 power button and it did but with black screen ..
went to recovery mode and it worked ..
restored whole system (step5) and ps3 worked for the next reboot but when i try reboot it again, it gives me black screen
and system won't work till i keep pressing power button and hear 1 beep ..
i did update to rogero 4.40 > Rogero Downgrader > Rebug 3.55 > Rebug 4.30 Cex the whole process again .
and it seems that the problem is with Dex only ..
cause when i go to Rebug toolbox and switch it back to Cex ps3 work perfectly
but when i swap to Dex,black screen on next reboot ..
could my DEX dump be corrupt after using it alot ?
is problem with the hard drive ?
am i stuck on Cex forever or is there a sloution ?
note: im on Rebug Rex 4.30.2 (Cex) so i can upgrade or downgrade .
sorry for taking long but i thought making it clear to you what i'm facing ..
so can you help me please with this ?? im really in need to hear from pros ..
Sloution : turning on PS3 into Blackscreen > Run [ProDG Target Manager] >Target >PS3 [IP]> Right Click > Reset Mode >Check [System Software Mode] > Right Click PS3 [IP] > Reset
09-04-2013, 10:37 PM
#4
zAutoAiiM_
GET OFF MY DICK!!!!
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
