(adsbygoogle = window.adsbygoogle || []).push({}); did this for people who constantly p.m any way to load firmware with bad blu ray drive here it is enjoy
bluray-drive-bypass firmwares and some unbrick explanations

list of firmware bypassed meaning not needing a blu ray drive to use
1. Rebug cfw BDB: You must login or register to view this content.
2. Watungrza 3.55 BDB: You must login or register to view this content.
3. KMEAW 3.55 BDB: You must login or register to view this content.
DOWNGRADE FIRMWARE BDB 3.55:You must login or register to view this content.
You must login or register to view this content.
4. 3.55 OFFICAL BDB: You must login or register to view this content.
5. 3.41 BDB: You must login or register to view this content.
6. 3.15 BDB: You must login or register to view this content.

Now in steps, we try this first if you are in a loop.

1. Power of the console, no lights on.

2. Take the HDD out the console

3. Put HDD on youre pc ( get a housing for it and usb it on youre pc something like this EXAMPLE ), i had mine for 10 euro, after the fix you can always use it, i bought a hdd for it 320gig for 40 euro , (or put it in a laptop if it fits, format it there , and take it out )

4. Get somekind of program for formatting the HDD , i used EASEUS Partition Master, format the HDD in ntfs and use primary.

5. Put the HDD back in the console, dont turn it on yet.

6. Take a USBstick, and format it to fat32 ,

7. Make a folder on the root of the usbstick named PS3, open that folder, and make in that folder , the folder UPDATE, in that folder UPDATE you put the firmware of this link DBD 3.55 File name: You must login or register to view this content.

8. Put the usbstick in the right usb port of youre console, nothing else in the other ports.

9. Power it on and keep the button pushed till it beeps 2 times, then release, try again if it beeps one time and goes to xmb, or beeps once and goes off.

If it beeps 2 times and you release button , then after a few seconds it asked for a connected controller, then you can choose the update option.

Hope it works if not try in the loop to remove the HDD, format it and put it back then try the firmware again in recovery mode, try different firmware, maybe the one you had last, but use always the BDB versions.

After installing the ofw 3.55BDB fw you want to try the custom firmwares, install those ones same way or thru factory mode, for me it didnt worked on the normal way thru xmb menu.
ps remember you always need the BDB versions to update or downgrade thru recovery or factory mode or if you use the others you get a loop on 76 %,or get a red screen because of the check for a good working bluray logic board, it will only work when install thru recovery menu, most of the times it says the pup is damaged when you try to do it thru the xmb menu.
s6

YOu can make a BDB firmware by yourself, its easy if you follow warren guide and the links to the keys. Only need a ofw firmware of sony.

I used the package from warren from his guide
Download this BDB package: You must login or register to view this content.
The Guide Warren wrote to patch a CFW: You must login or register to view this content.
Guide warren:You must login or register to view this content.

You must put your keys in: "C:/PS3/.ps3"
You can't rename a folder with a "." at the beginning of the name, so you must download a pack with a folder already named and extract it in your home (c:/PS3 in your case).
pS3KEYS --->You must login or register to view this content.

CURRENTLY WORKING ON Q&A FLAG FOR PEOPLE WITHOUT BD DRIVE

Here is were you can find what blu ray drive you need you need :
You must login or register to view this content.

Thanks, I did this because I couldn't update my ps3 with broken BD

is there any fix for this?

wow can't wait to try this with the broken PS3 i have lying around.

Much thanks

you have to format the hard drive first. that way when you turn it on it wont go into the loop and you can go into recovery mode

ive formated the hdd 5 times useing differnt methods, still wont work

why cant i run packages with the bdb firmware? its kmeaw 3.55 bdb? any help pleaseee???

Do you have to install the ofw before you install the kmeaw fw. With the 3.55 ofw i keep getting error 8002f2e6 after it says it updated 100% and i have to put it back into recovery mode only for it to do the same thing
Should I just install 3.41 instead and jailbreak that?

---------- Post added at 12:59 PM ---------- Previous post was at 12:45 PM ----------

Or do you think you can make a different 3.55 bdb ofw?

i have a ps3 with 40gb with bluray broke i have try all reinstall 10 times of cf all cfw and don't work when i open a homebrew will be black screen i don't know why i try everything

it does that because yo need a bluray drive to view stuff or at least working logic board