Originally posted by Konie06
Ok so i downloaded this and Installed it, the PKG and stuff works.. but how do i activate the QA Flag, i pressed the button combo but its not working... help?
download the QA package and install it then do the button combo
You must login or register to view this content.
---------- Post added at 07:13 PM ---------- Previous post was at 07:10 PM ----------
Originally posted by Holy
hold it all down hit down on dpad with tongue or chin dont turn any mode on or you will cry when you finish wait till advance qa especially don't mess with nprm debug. also when you Activate qa flag put kmeaw back on to play pirates also p.s qa there for ever
QA can be removed There is a package to remove it if the person doesn't want it anymore
---------- Post added at 07:17 PM ---------- Previous post was at 07:13 PM ----------
Originally posted by MateoGodlike
Ummm We don't need yet another CFW 3.55 so i think this should be deleted because Its crap.
PS: You didn't make this. Just simply changed everything off of PS3A's CFW.
Wrong This was Made From Original ofw 3.55 from sony this is why it runs flawless
---------- Post added at 07:23 PM ---------- Previous post was at 07:17 PM ----------
Originally posted by COOL78
merci mais c'est stable?
people have been saying its more stable then kmeaw 3.55
---------- Post added at 07:28 PM ---------- Previous post was at 07:23 PM ----------
Originally posted by yoshijon
Oh boy another cfw that does what my old cfw does plus crap I don't care about.
its more stable & in the debug settings HDCP Option SHOWS & WORKS
---------- Post added at 07:29 PM ---------- Previous post was at 07:28 PM ----------
Originally posted by iYargh
does it kill DLC like otheros CFW with QA flag? If it does, you should add that info, too.
Nope that problem is fixed in this firmware
---------- Post added at 07:33 PM ---------- Previous post was at 07:29 PM ----------
Originally posted by 9733
dude calm the hell down bro.
Just tested it fine, and he probably made it in MFW builder.
also its like all the CFW, put into 1, except debug settings arnt there unless u QA FLAG which is supported.
yes it was made with MFW builder but a patched one
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Once you have your firmware installed go here and download the following files:
You must login or register to view this content.
setup_flash_for_otheros.pkg
dtbImage.ps3.bin (For 16MB NOR) or dtbImage.ps3.bin.minimal (For 256MB NAND)
install_otheros.pkg
boot_otheros.pkg
reboot.pkg
create_hdd_region.sh
hdd_access.sh
Install OtherOS on HDD (for all PS3 models)
THIS IS FROM
You must login or register to view this content.
NOTICE: All my tools should beep. If you don't get beep during one of the steps below
then stop doing anything and contact me. I will help.
OtherOS++ support: irc.gitbrew.org (ssl) #otheros
ALL PS3 MODELS ARE SUPPORTED !!!
1. Install my latest CFW
2. When installation is finished, go to recovery menu and choose "Restore PS3 System"
3. Now your GameOS should use only the half of your HDD
(Currently working on a better approach)
4. Run setup_flash_for_otheros.pkg (for all PS3 models)
5. Reboot (It's important to shut down and turn on your PS3)
6. Store dtbImage.ps3.bin on USB drive, plug it in and run install_otheros.pkg
(NAND owners should use dtbImage.ps3.bin.minimal, rename it to dtbImage.ps3.bin).
Try different USB ports if you don't get any beeps.
7. Run boot_otheros.pkg
8. Run reboot.pkg
9. You should be in petitboot now.
Exit from CUI to shell or switch to another virtual console.
10. Run script create_hdd_region.sh
11. Reboot and boot petitboot again
12. You should see now new HDD device on petitboot, /dev/ps3dd.
That's your OtherOS HDD region.
Don't touch any other HDD regions if you don't know what you are doing. Use only ps3dd
device for your Linux installation. Use parted to partition it and create GPT partition
table on ps3dd. GPT is supported by both, Linux and FreeBSD.
Be warned, if you damage your GameOS HDD region, GameOS will reformat HDD and
remove your Linux HDD region in the process. You have to do the above steps again.
Don't mess with GameOS HDD region and GameOS won't mess with your OtherOS HDD region.
For users who installed OtherOS on VFLASH region 7 previously
--------------------------------------------------------------
You have to restore your VFLASH before doing the above steps.
Be warned, this step is NOT for NAND owners.
1. Install my latest petitboot
2. Boot petitboot
3. Run script restore_vflash.sh
4. Reboot. GameOS should reformat your HDD again.