Post: How to fix "Downloading File From Target" Debugger Glitch
Options
12-31-2013, 04:38 AM
#1
ICS Vortex
Between Light and Lies
Whenever you open up debugger, it will set on a downloading dialog box and never finish
You must login or register to view this content.
I'm here to tell you how to fix that!
First of all, you need to download MultiMan or any homebrew application that will allow you to have read and write access to dev_flash/blind.
1) Start said hombrew application and allow access to dev_flash
2) FTP into your PS3, this can be done through Target Manager using File Explorer
3) Navigate to /dev_blind/sys/external/ or /dev_flash/sys/external/
4) Copy all of the files there
5) Navigate to C:\Users\User\AppData\Local\SN Systems\ProDG Debugger for PS3\flash_files\0404063e\ on your computer
6) Paste all of the files that you copied into that folder
That's all! It should start up fine once you do that
You should know, all of the files located inside of the external folder do not necessarily need to be copied over, but it's a whole lot faster than individually picking out the x amount of files that need to be transferred over.
*Note: If you can't view these folders, make sure that you go into your file and folder options and check "Show hidden files, folders, and drives."
Last edited by
ICS Vortex ; 10-17-2014 at 03:17 AM.
The following 27 users say thank you to ICS Vortex for this useful post:
11-02-2014, 06:32 AM
#12
modded_hero
Brute
05-28-2015, 02:20 AM
#14
OfficialTripps
Haxor!
07-18-2015, 06:54 PM
#15
ItzSparkBoii
Big Sister
Originally posted by ICS
Hi all, after a few hours of dealing with this error, I finally decided to investigate and see what was going on.. For those who don't know what this horrific error is:
Whenever you open up debugger, it will set on a downloading dialog box and never finish
You must login or register to view this content.
I'm here to tell you how to fix that!
First of all, you need to download MultiMan or any homebrew application that will allow you to have read and write access to dev_flash/blind.
1) Start said hombrew application and allow access to dev_flash
2) FTP into your PS3, this can be done through Target Manager using File Explorer
3) Navigate to /dev_blind/sys/external/ or /dev_flash/sys/external/
4) Copy all of the files there
5) Navigate to C:\Users\User\AppData\Local\SN Systems\ProDG Debugger for PS3\flash_files\0404063e\ on your computer
6) Paste all of the files that you copied into that folder
That's all! It should start up fine once you do that
You should know, all of the files located inside of the external folder do not necessarily need to be copied over, but it's a whole lot faster than individually picking out the x amount of files that need to be transferred over.
*Note: If you can't view these folders, make sure that you go into your file and folder options and check "Show hidden files, folders, and drives."
Whenever you open up debugger, it will set on a downloading dialog box and never finish
You must login or register to view this content.
I'm here to tell you how to fix that!
First of all, you need to download MultiMan or any homebrew application that will allow you to have read and write access to dev_flash/blind.
1) Start said hombrew application and allow access to dev_flash
2) FTP into your PS3, this can be done through Target Manager using File Explorer
3) Navigate to /dev_blind/sys/external/ or /dev_flash/sys/external/
4) Copy all of the files there
5) Navigate to C:\Users\User\AppData\Local\SN Systems\ProDG Debugger for PS3\flash_files\0404063e\ on your computer
6) Paste all of the files that you copied into that folder
That's all! It should start up fine once you do that
You should know, all of the files located inside of the external folder do not necessarily need to be copied over, but it's a whole lot faster than individually picking out the x amount of files that need to be transferred over.
*Note: If you can't view these folders, make sure that you go into your file and folder options and check "Show hidden files, folders, and drives."
hmm i did all those steps still the same
06-11-2016, 12:50 AM
#18
matrixmods
Pokemon Trainer
Originally posted by ICS
Hi all, after a few hours of dealing with this error, I finally decided to investigate and see what was going on.. For those who don't know what this horrific error is:
Whenever you open up debugger, it will set on a downloading dialog box and never finish
You must login or register to view this content.
I'm here to tell you how to fix that!
First of all, you need to download MultiMan or any homebrew application that will allow you to have read and write access to dev_flash/blind.
1) Start said hombrew application and allow access to dev_flash
2) FTP into your PS3, this can be done through Target Manager using File Explorer
3) Navigate to /dev_blind/sys/external/ or /dev_flash/sys/external/
4) Copy all of the files there
5) Navigate to C:\Users\User\AppData\Local\SN Systems\ProDG Debugger for PS3\flash_files\0404063e\ on your computer
6) Paste all of the files that you copied into that folder
That's all! It should start up fine once you do that
You should know, all of the files located inside of the external folder do not necessarily need to be copied over, but it's a whole lot faster than individually picking out the x amount of files that need to be transferred over.
*Note: If you can't view these folders, make sure that you go into your file and folder options and check "Show hidden files, folders, and drives."
Whenever you open up debugger, it will set on a downloading dialog box and never finish
You must login or register to view this content.
I'm here to tell you how to fix that!
First of all, you need to download MultiMan or any homebrew application that will allow you to have read and write access to dev_flash/blind.
1) Start said hombrew application and allow access to dev_flash
2) FTP into your PS3, this can be done through Target Manager using File Explorer
3) Navigate to /dev_blind/sys/external/ or /dev_flash/sys/external/
4) Copy all of the files there
5) Navigate to C:\Users\User\AppData\Local\SN Systems\ProDG Debugger for PS3\flash_files\0404063e\ on your computer
6) Paste all of the files that you copied into that folder
That's all! It should start up fine once you do that
You should know, all of the files located inside of the external folder do not necessarily need to be copied over, but it's a whole lot faster than individually picking out the x amount of files that need to be transferred over.
*Note: If you can't view these folders, make sure that you go into your file and folder options and check "Show hidden files, folders, and drives."
it still gets stuck on the downloading thing. Would being on Windows 10 be a problem?
06-11-2016, 01:18 AM
#19
ICS Vortex
Between Light and Lies
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
