Post: Administrative access in school! (cmd, & drive access)
Options
03-04-2011, 10:30 PM
#1
<Jimbo>
</Jimbo>
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Windows XP and Windows 7 only! :p
Please post below if you have made this work on another version of windows! :y:
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Last edited by
<Jimbo> ; 03-24-2011 at 10:07 PM.
Reason: Updated!
The following 11 users say thank you to <Jimbo> for this useful post:
03-08-2011, 11:05 PM
#21
David.
Do a barrel roll!
Originally posted by 123tonka
Yeah, that doesn't work for me weirdly... So I came up with this, as I said... "Try this if nothing else works!" 
That's rather strange. Check the bottom of the screen, the key might be different depending on the brand of the computer for example Dell might make their BIOS button F2 whereas HP make theirs F3, but I thought by default it was F8 for ALL Windows machines, maybe I'm wrong. Who knows, at least you know how to get into it.
03-10-2011, 02:41 AM
#24
Pills
Batman
Originally posted by 123tonka
The school I attend has 3 full time workers making sure people like me don't hack the computers... They failed.
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. notePress power button before windows boots!)
5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
...followed by enter...
...then...
...followed by enter!
9)Restart the computer, then log onto the computer with
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
enjoy starwars! :p
Need any help?! Post below! :p
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Need any help?! Post below! :p
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Would it be possible for them to trace this back to us after we log out of the admin account? :carling:
03-10-2011, 07:04 PM
#26
TheUberFail
Banned
Originally posted by 123tonka
The school I attend has 3 full time workers making sure people like me don't hack the computers... They failed.
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. notePress power button before windows boots!)
5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
...followed by enter...
...then...
...followed by enter!
9)Restart the computer, then log onto the computer with
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
First day at my new college i tried this, but this is a technology college, even this is not possible
only possible way is to bring a OS on a disc and boot up from the disc, pointless in the end might as well just run a RD in virtual/portable.
The following user thanked TheUberFail for this useful post:
03-10-2011, 07:23 PM
#27
<Jimbo>
</Jimbo>
lol, I wish i could try installing another OS in school... but most PC's have broken disktrays... I do have the pass for system bios; but that has never worked! :p You'll have to let me know how you get on!
Originally posted by TheUberFail
First day at my new college i tried this, but this is a technology college, even this is not possible only possible way is to bring a OS on a disc and boot up from the disc, pointless in the end might as well just run a RD in virtual/portable.
only possible way is to bring a OS on a disc and boot up from the disc, pointless in the end might as well just run a RD in virtual/portable.
03-10-2011, 08:24 PM
#28
TheUberFail
Banned
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
