Originally posted by 2
I was in the process of JB my ps3 with the E3 flasher. When I was installing the bkpps3_patched.bin (renamed to bkpps3.bin), my power cut off in the middle of the installation. And now whenever I try to turn it on, I get 3 beeps and then continuous red flashing lights. It didn't seem like it at first but it might be a YLOD. The yellow light is very subtle and instant before the red. Can anyone help me if I can fix this issue with the e3 flasher? Please and thanks
Assuming nothing shorted, this is probably a result of the unfinished and now corrupt flash.
You should be able to fix this by installing a good backup (if you have one).
Since the console will not power on properly, you will need to solder a wire from the tristate to a ground. This will keep the console powered so that you can flash a good backup to it.
E3 flasher's switches should be "flash fun" up, the rest down.
Once you flash a good backup, you can remove the wire and try to power on the console.
If all is good, you can try to install your patched backup and continue as normal.
If it doesn't work, your good backup was corrupt and you'll be s.o.l.
Good luck! need any more help, just ask.