(adsbygoogle = window.adsbygoogle || []).push({});

CONFIGURING xLink Kai
You must login or register to view this content.

[ame]https://www.youtube.com/watch?v=yieUmCubiEQ[/ame]
1. Start up You must login or register to view this content. before you turn on your PS3

2. Turn on your ps3 and it should say DNS error. If it does then you are on the right track

3. Start up Black Ops and go to multiplayer. From there, go to LAN Party and press Join Game.

4. Now go back to XLink Kai and check the Diagnostics Mode . (Clicking that globe should take you to the screen shown below. Let it sit at that screen for a few seconds, then click on the magnifying glass next to the globe in the upper right-hand corner labeled “Switch to Diagnostics Mode.”

You must login or register to view this content.

5. In the section with the check mark, under “Network Reachable” it should read as YES. In the section with the green arrow, under “Network Card” it should read your PC's network card. Underneath that where it says “Locked” it should read as YES. If your network card is not locked, Kai will not be able to configure your Playstation 3 correctly.

You must login or register to view this content.

6. Now finally the moment of truth. Are your PS3 and Kai Engine configured correctly to work together…? Click on the folder tab underneath the question mark in the upper right-hand corner labeled “Switch to Diagnostics View.” There you should see a message that says “Sony PlayStation 3, configured successfully.” Similar to what's seen below in the picture… Yes , it's a picture of a PS2 , but if it says : configured successfully , then you're ok to go. It's also possible that you only see a mac address. If it's not red you're also ok to go.

You must login or register to view this content.


7. Once you have finished playing on XLink Kai & you want to play on the PSN Network again , close XLink Kai & restart your Playstation 3 . There will be no DNS Error & you will be able again to play on PSN .

You must login or register to view this content.

did u get a vid??

his TUT is pretty good, pluss i used a french 1 but it had lots of pictures (i speak english & german not french) ill post as a comment so you hve to just look at the pics. They really help

Found a video on configuring xLink Kai with the PS3.

I'm trying to foward port, these are the steps im taking. are they right?
You must login or register to view this content.
Then i add custom service, and enter what info?
You must login or register to view this content.

Thanks for the feedback

---------- Post added at 06:10 PM ---------- Previous post was at 06:08 PM ----------



I posted a link for configuring now and a video too

Also download Version 7.3 not 7.4 no one can get 7.4 to work so heres the link for 7.3: You must login or register to view this content.

Also here is the link for the french TUT i mentioned in my previous post: (Hint) click these words when you click this link, and dont mind the french just pay attention to the detailed pictures! Télécharger ce fichier thats what you want to click on when you follow THIS link: You must login or register to view this content.

---------- Post added at 05:14 PM ---------- Previous post was at 05:12 PM ----------



No prob read my comment above this one because noone can get Version 7.4 to work you need 7.3 and as soon as you click the link for 7.3 in my previous post it asks you to Run on Save. Its very convienient

imma have to try this later wonder how many people are on this?

that vid is bs we need a better one /facepalm

read my post a few up from this its a very detailed pic the wordsr in french but the pics are detailed