Post: Tutorial: Pass 10 sensitivity
Options
06-27-2010, 12:08 AM
#1
macattack1459
Do a barrel roll!
Tutorial:
Step 1: locate your GPAD0_CM.PRF file in PS3/SAVEDATA/BLUS30377-AUTO-/GPAD0_CM.PRF
Step 2: Open the file in any hex editor. I use Hex Fiend because I have a mac.
Step 3: Make sure you have 4 sets of four columns like so:
You must login or register to view this content.
Step 4: Notice the selected values:
You must login or register to view this content.
They control your sensitivity and have previously been used to get no recoil but no ability to look around.
Step 5: Delete all the values and replace them with 00 00 00 00
Step 6: Replace the first part of the values with 41-49 these values will allow extremely fast aiming without loosing the ability to look around. I recommend 41 or 42 higher values are nearly impossible to function with.
Example:
42 00 00 00
copy and past if your too lazy:
53 45 4D 56 00 00 00 01 00 00 00 01 00 02 00 01 02 01 02 05 42 00 00 00 03 05 3F 80 00 00 04 05 3F 80 00 00 05 05 BD 99 99 9A 06 05 3F 4C CC CD 07 05 3F 75 70 A4 08 05 3F 6D C2 8F 09 04 00 00 5C E0 0A 04 00 22 44 99 0B 04 00 00 FD 71 0C 04 00 00 14 71 0D 04 00 00 01 DA 0E 04 00 00 00 2D 0F 02 01 10 02 01 11 02 00 12 02 00 13 02 00 14 02 01 16 06 00 00 00 20 62 75 74 74 6F 6E 73 5F 64 65 66 61 75 6C 74 00 17 06 00 20 00 20 74 68 75 6D 62 73 74 69 63 6B 5F 64 65 66 61 75 6C 74 00
Download if your too lazy to copy and paste:
You must login or register to view this content.
Please rep and comment thanks! If you find anything else you can do with GPAD0_CM.PRF post it here or make a tutorial.
Last edited by
macattack1459 ; 07-13-2010 at 04:46 AM.
The following 39 users say thank you to macattack1459 for this useful post:
-Skyline, af12314, Bluffed, Brian235026, BSLICER25, Champerzz, Clutch Hunterr, Cryptic, DEVILEE97G-UNIT, Drake, EarthScar, EliteMossy, FuzzaMuzza, Geordie4life2, GUESS_HU, iiFaMoUzZ-, IPunchChildren, Journey719, Judgement, K3ITH2K9, lerbus87, Lotus321, M_OK, malaka-hincha, mcnibs96, Mocro Lmfao, olboijoe, pro185, ps3user123, ResistElite,, Saint Jimmy, slipknot0009, Slur, SoLDieRDaP, TheGamerBurton, UMD, xPottsy, XxprokillahxX, zIFazex
07-12-2010, 03:16 PM
#92
iVF™ Elemental
Little One
07-12-2010, 08:49 PM
#95
macattack1459
Do a barrel roll!
07-12-2010, 10:20 PM
#98
glitchplz
Samurai Poster
I would like to let you guys know going from 10 sensitivity to what they are calling "11" is a huge jump compared to 9 to 10. I decided to evaluate the changes by converting the Hex values to decimal and then comparing the difference between different sensitivities and then the sensitives that are normally not obtainable. If you use "41 00 00 00" you are (66571993088 ). greater than ten's decimal value. The differences between 10 from 9 and 9 from 8 are both (536870912), which is dramatically lower. For me the jump seemed oddly accelerated at first but I can handle it, but if you are someone who slowly adjusts over time, then try lower values instead of jumping straight to "41 00 00 00". Try "40 8(A-F) 00 00" or "40 9(A-F) 00 00" or you can go up and try "40 AA 00 00" etc. Hex increases in this manner: 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F. So 00 is the lowest and FF is the highest value for hex. I hope this helps some of you who want to use a higher sensitivity but feel going from 10 ("40 80 00 00") to "41 00 00 00" is too big of a jump.
The following user thanked glitchplz for this useful post:
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
