(adsbygoogle = window.adsbygoogle || []).push({}); PS3Key Downgrader firmware online!
Posted on 7th December 2010

If you need to downgrade a PS3 with firmware version 3.50 or below you can now grab the PS3KEY JIG firmware from the downloads section! Please note that we do not host the modified PUP file or any other file that may contain copyrighted code.

You must login or register to view this content.
You must login or register to view this content.

PS3Key Downgrader announced!
Posted on 4th December 2010

We have received many emails regarding "rumours" of a PS3Key downgrader capable of downgrading PS3 firmware from v3.50 to v3.41 using the "JIG" method. We can confirm that those ruomors are indeed true! Stay tuned for more news in the next few days!



Source: You must login or register to view this content.


Note to Atmel PS3Key users: This firmware has automatic bootloader entry, so there is no need to plug/unplug it to get into bootloader mode after flashing this firmware.

After you have completed the downgrading
procedure as described below you must reflash your PS3Key with the standard firmware(Found You must login or register to view this content.).

Flashing with Downgrade Files:
To get them into bootloader:

Atmel-based:

Connect and disconnect PS3Key to a USB port on your PC 3 times within 10 seconds. Then both LEDs (blue and red) will then come on at the same time. The Update button in the software will no longer be disabled and you will be able to click it to apply the update.

Silabs-based:

Connect PS3Key to a USB port on your computer and wait for 15-30 seconds. Both LEDs will come on, and PS3Key will appear as a USB memory stick. You will be able to apply the update by dragging and dropping the update FIRMWARE.BIN onto the memory stick.

Than load the downgrade files onto the PS3 Key.

Tutorial:
Prepare a blank USB memory stick with only 2 files on it: Lv2Diag.self (file 1) and the modified 3.41 PUP file(Download You must login or register to view this content.)
These must be in the root of the memory stick and there must not be other files on it.

- Insert the PS3Key with the downgrade firmware in your console.
- Turn on the PS3 using the standard PS3Key sequence; power cycle, power on, then quickly press eject. After a very short while the PS3 will power off.
- Turn on the PS3 to confirm that it is in Service Mode.(You should see a red box on the screen saying Factory Service Mode)
- Turn off the PS3 and remove PS3Key.
- Insert the USB memory stick with the 2 files on in the rightmost USB port of the PS3 and turn it on. The screen will be black,
but the LED on the PS3 will blink.
– Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off.
- Remove the USB memory stick and turn on the PS3. It will still be in service mode.

- Insert USB drive in PC, delete the 2 files, and copy LV2Diag.self (file 2) to it.
- Insert USB memory stick and power on the PS3. After approximately 10 seconds it will power off.
- Remove the memory stick and power on the PS3. The procedure is now complete.

Yes



What country you from?



Oh, no but they said it will be out in a few day

guess no more BO for a while lol xD

Yah, or if you have enough money buy a new PS3 :p

Please Help Me,im doing it right now but in Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off
Its flashing but my console dont power off

---------- Post added at 07:03 PM ---------- Previous post was at 07:02 PM ----------



Please whats wrong?

This might help you

[ame=https://www.youtube.com/watch?v=H4AWu8yFH0A]YouTube - PS Downgrade - PS JailBreak downgrade PS3 for Homebrew![/ame]

SHIT I Turned off my ps3 and now it says it can start the firmware and put a firmware update in a usb post to 3.50 i putted 3.50 didnt work WAT CAN I DO PLEASE ((((((((

Try putting it into safe mode and format, than try again

I have a big problem
I´m in service/factory mode
when i turn off my PS3 (slim) and put the USB with JIG files in my right USB port. turn on PS3.
and then the ps3 boot normaly, i´m always in service mode with FW 3.5
what can i do?
i do the JIG files on USB root
PC/USB(N/....pup. and...self(file1)

anyone can help?

YES thank you I have a ps3 key and a 3.50 ps3 I'm so happy