Post: [RELEASE] Waninkoko 3.55 CFW V2
01-29-2011, 02:09 PM #1
(adsbygoogle = window.adsbygoogle || []).push({}); This CFW is installed directly into the NAND has been tested in different models of console (FAT and Slim, reported in the main post) and without any brickeo or similar problem.

The testers have reported a high stability in the CFW and the same compatibility with games that could be obtained with different dongles.

The main core of the payload is based on Hermes, also has some features of PL3 and supplementary code and improved by Waninkoko.

Attempted to create an application that enable / disable the payload, so that after leaving a manager backup Blu-ray was functional. After some testing has not been able to be operational, it would be desirable for the various backups managers were in charge of implementing such functionality or may be added in a later CFW.

+------------------------------+
| Custom PS3 Firmware v3.55 v2 |
| Developed by Waninkoko |
+------------------------------+
| You must login or register to view this content. |
+------------------------------+

>> DESCRIPTION:

This custom firmware for the PS3 increases the system capabilities of your console
to allow installation and execution of homebrew applications.
This Custom Firmware can also allow the loading of legal copies (backups) using these new functions.

We do not support or support the use of illegal copies.
We are not responsible for any damage caused by use of the Custom Firmware.

>> INSTALLATION:

1. Download the firmware 3.55 for PS3 (PS3UPDAT.PUP file).
2. PS3UPDAT.PUP file patched using the patch included in this package using the application "bsdiff ( Binary diff ).
3. PUP file installs the patch as normal firmware upgrade.
(If you're in the version 3.55 you need to install from the recovery mode.)

>> MODELS TESTESad Awesome

- PS3 40GB FAT (CECHG04)
- PS3 60GB FAT (CECHC04)
- PS3 80GB FAT (CECHK04)
- 120GB PS3 Slim (CECH2004A)
- 120GB PS3 Slim (CECH2104A)
- PS3 Slim 250GB (CECH2004B)

>> KUDOS:

- Team fail0verflow
- Kakarot
- Flukes1
- Hermes

>> KUDOS TO OUR TESTERS:

- Jgade
- Etxe
- EXXtreme
- Vasolechecongalletas
- Carpi
- Mibaito
- Juaniyoalm
- XP10SiV

>> NOTES:
THERE IS NO CHANCE OF BRICK AS THIS DOES NOT EDIT FLASH OR LV2

I regret the situation once again produced with my V1. The solution to this problem is not simple and is not expected in the short term.

>PREPATCHED PUP FILE You must login or register to view this content.
COURTESY OF "ihaxgames"

Source: You must login or register to view this content.
Last edited by fatboyfry ; 02-02-2011 at 05:01 PM.

The following 12 users say thank you to fatboyfry for this useful post:

cood5, davidor08, El Nomeo, ihaxgames, J.V., Max21, nodroz, p78ch201, PryZeex, styl, vipervimal, wfede21
01-29-2011, 07:07 PM #29
demize
Maggbot timeout!
Originally posted by reginald7 View Post
Is this better than Kmeaw's 3.55?

Now can I install PKGs signed for 3.55 instead of the ones for 3.41 like in v1 of his cfw?

---------- Post added at 01:57 PM ---------- Previous post was at 01:56 PM ----------

Is this better than Kmeaw's 3.55?

Now can I install PKGs signed for 3.55 instead of the ones for 3.41 like in v1 of his cfw?


I like waninkoko's versoin 1 better than kmeaw's. Personal preference. I haven't had any issues with it at all.
01-29-2011, 07:15 PM #30
the only insue i have is that some games freezes like hell...
uncharted 2 for example...
01-29-2011, 07:28 PM #31
demize
Maggbot timeout!
Originally posted by krave View Post
the only insue i have is that some games freezes like hell...
uncharted 2 for example...


Wow. I have been playing it for a week straight with no freezing at all.
01-29-2011, 07:29 PM #32
nodroz
Do a barrel roll!
Originally posted by bmxdude9 View Post
If Im still using geohot's would it be possible to upgrade to this directly from geohot's CFW or will I need to switch back to OFW first?


It's better to go to OFW and then to Waninkoko V2.
01-29-2011, 07:43 PM #33
Originally posted by demize View Post
Wow. I have been playing it for a week straight with no freezing at all.


but are u using a backup or the BD?
01-29-2011, 07:46 PM #34
demize
Maggbot timeout!
I'm using a backup with a disc in the drive on Rogero v7.8. I don't see a need to upgrade to the new version of Rogero yet as I have had no issues with this version as is.
01-29-2011, 07:48 PM #35
i'm gonna try this too
i'm playing with a backup w/o disk
01-29-2011, 08:06 PM #36
-Bane-
Bane Does Work. Like Me.
Originally posted by fatboyfry View Post
This CFW is installed directly into the NAND has been tested in different models of console (FAT and Slim, reported in the main post) and without any brickeo or similar problem.

The testers have reported a high stability in the CFW and the same compatibility with games that could be obtained with different dongles.

The main core of the payload is based on Hermes, also has some features of PL3 and supplementary code and improved by Waninkoko.

Attempted to create an application that enable / disable the payload, so that after leaving a manager backup Blu-ray was functional. After some testing has not been able to be operational, it would be desirable for the various backups managers were in charge of implementing such functionality or may be added in a later CFW.

+------------------------------+
| Custom PS3 Firmware v3.55 v2 |
| Developed by Waninkoko |
+------------------------------+
| You must login or register to view this content. |
+------------------------------+

>> DESCRIPTION:

This custom firmware for the PS3 increases the system capabilities of your console
to allow installation and execution of homebrew applications.
This Custom Firmware can also allow the loading of legal copies (backups) using these new functions.

We do not support or support the use of illegal copies.
We are not responsible for any damage caused by use of the Custom Firmware.

>> INSTALLATION:

1. Download the firmware 3.55 for PS3 (PS3UPDAT.PUP file).
2. PS3UPDAT.PUP file patched using the patch included in this package using the application "bsdiff ( Binary diff ).
3. PUP file installs the patch as normal firmware upgrade.
(If you're in the version 3.55 you need to install from the recovery mode.)

>> MODELS TESTESad Awesome

- PS3 40GB FAT (CECHG04)
- PS3 60GB FAT (CECHC04)
- PS3 80GB FAT (CECHK04)
- 120GB PS3 Slim (CECH2004A)
- 120GB PS3 Slim (CECH2104A)
- PS3 Slim 250GB (CECH2004B)

>> KUDOS:

- Team fail0verflow
- Kakarot
- Flukes1
- Hermes

>> KUDOS TO OUR TESTERS:

- Jgade
- Etxe
- EXXtreme
- Vasolechecongalletas
- Carpi
- Mibaito
- Juaniyoalm
- XP10SiV

>> NOTES:
THERE IS NO CHANCE OF BRICK AS THIS DOES NOT EDIT FLASH OR LV2

I regret the situation once again produced with my V1. The solution to this problem is not simple and is not expected in the short term.

> Download 3.55 CFW V2 Waninkoko You must login or register to view this content.
>PREPATCHED PUP FILE You must login or register to view this content.
COURTESY OF "ihaxgames"

Source: You must login or register to view this content.


im on GeoHot CFW (dont hate)
im about to change to OFW so i can install this without risk.
but, should i download the prepatch? because i downloaded the other one and there was no .pup there was only a .PATCH
and i didnt want to change the extension and than brick my console.
01-29-2011, 08:08 PM #37
Originally posted by cutznbruzez97 View Post
im on GeoHot CFW (dont hate)
im about to change to OFW so i can install this without risk.
but, should i download the prepatch? because i downloaded the other one and there was no .pup there was only a .PATCH
and i didnt want to change the extension and than brick my console.


download the prepatch

The following user thanked fatboyfry for this useful post:

-Bane-

Copyright © 2024, NextGenUpdate.
All Rights Reserved.

Gray NextGenUpdate Logo