Post: EnVy 3.55 CFW with debug options and more!
Options
03-06-2011, 07:18 AM
#1
EnVy_AsTrO
Hurah!
You need to install from waninkokos CFW that has peek and poke syscalls, or using kakarotos CFW. This will not work on Geohot's CFW. Just as long as your firmware has peek and poke your fine.
This firmware adds debug options. It also adds */app_home/PS3_GAME/ and install packages to the "network" category.
EnVy 3.55 CFW download: You must login or register to view this content.
Working install tool: You must login or register to view this content.
Installation:
1. Download the firmware above.
2. Go to the control panel-->large icons-->folder options-->view
select "show hidden files, folders, and drives" and uncheck "Hide protected operating system files (recomended)"
2. Extract the files to your USB device excluding the README file.
3 Install the PKG file above. (don't use the package file inside the 3.55 CFW folder.)
4. Run the PKG file, and press "X" and your system will restart with the Firmware. Their is 0% of a brick, as it doesn't flash. It runs off the USB. Don't unplug the USB unless you wan't your PS3 to freeze on you, and you'l have to restart it. To get rid of the CFW, just turn your PS3 off and remove your USB device.
I will be adding a permanent sollution, so you won't have to run the PKG file every time, and it will flash to the NAND.
If you would like to see something in here, let me know. But please, keep it simple.
You must login or register to view this content.
Last edited by
EnVy_AsTrO ; 03-06-2011 at 06:19 PM.
The following 5 users say thank you to EnVy_AsTrO for this useful post:
03-06-2011, 10:06 PM
#56
Threatz2Fresshh
I was 2fresshh before
Originally posted by AsTrO
Hey guys. My firmware is complete, and there is 0% change of a brick, as the firmware DOES NOT run off the flash. Although, I will add that feature later. If you guys would like a permanent flash for this let me know.
You need to install from waninkokos CFW that has peek and poke syscalls, or using kakarotos CFW. This will not work on Geohot's CFW. Just as long as your firmware has peek and poke your fine.
This firmware adds debug options. It also adds */app_home/PS3_GAME/ and install packages to the "network" category.
EnVy 3.55 CFW download: You must login or register to view this content.
Working install tool: You must login or register to view this content.
Installation:
1. Download the firmware above.
2. Go to the control panel-->large icons-->folder options-->view
select "show hidden files, folders, and drives" and uncheck "Hide protected operating system files (recomended)"
2. Extract the files to your USB device excluding the README file.
3 Install the PKG file above. (don't use the package file inside the 3.55 CFW folder.)
4. Run the PKG file, and press "X" and your system will restart with the Firmware. Their is 0% of a brick, as it doesn't flash. It runs off the USB. Don't unplug the USB unless you wan't your PS3 to freeze on you, and you'l have to restart it. To get rid of the CFW, just turn your PS3 off and remove your USB device.
I will be adding a permanent sollution, so you won't have to run the PKG file every time, and it will flash to the NAND.
If you would like to see something in here, let me know. But please, keep it simple.
You must login or register to view this content.
You need to install from waninkokos CFW that has peek and poke syscalls, or using kakarotos CFW. This will not work on Geohot's CFW. Just as long as your firmware has peek and poke your fine.
This firmware adds debug options. It also adds */app_home/PS3_GAME/ and install packages to the "network" category.
EnVy 3.55 CFW download: You must login or register to view this content.
Working install tool: You must login or register to view this content.
Installation:
1. Download the firmware above.
2. Go to the control panel-->large icons-->folder options-->view
select "show hidden files, folders, and drives" and uncheck "Hide protected operating system files (recomended)"
2. Extract the files to your USB device excluding the README file.
3 Install the PKG file above. (don't use the package file inside the 3.55 CFW folder.)
4. Run the PKG file, and press "X" and your system will restart with the Firmware. Their is 0% of a brick, as it doesn't flash. It runs off the USB. Don't unplug the USB unless you wan't your PS3 to freeze on you, and you'l have to restart it. To get rid of the CFW, just turn your PS3 off and remove your USB device.
I will be adding a permanent sollution, so you won't have to run the PKG file every time, and it will flash to the NAND.
If you would like to see something in here, let me know. But please, keep it simple.
You must login or register to view this content.
does it work with kmeaw?
03-06-2011, 10:09 PM
#57
EnVy_AsTrO
Hurah!
03-06-2011, 10:52 PM
#58
New York BOY !
Service Shop Owner ;
03-06-2011, 10:57 PM
#59
Xcellerator
You talkin to me?
Originally posted by AsTrO
So, your hating on me for trying? So, if I created a 3.56 CFW, and it had a glitched where your PS3 turned off somehow by itself, you would call it a fail? WOW. And yes, I know 3.56 CFW isn't possible atm.
It's not that you tried, it's that the people that have tried say it doesn't work and what you are trying to say that you have 'done' has actually already been done many other people..
and they did it much better...
Best to test things and show proof, because this is how things end for everyone on this forum who make the same mistakes as you...
The point is: I'm hating on you cos what you've said works, actually doesn't work at all... And has actually wasted a lot of my time today...
Last edited by
Xcellerator ; 03-06-2011 at 11:01 PM.
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
